Here is the code to only display once an hour, Go to IDE and add device handler.
Then delete your connected smart outlet and re connect it and it should connect using the new device handler
https://graph.api.smartthings.com/ide/devices
to reset/reconnect device:
from sticks18 “To reset, unplug the outlet. Then while holding the button, plug the outlet in. When the LED comes on, release the button. It should now be reset. Start the Connect New Device procedure in the app and give it a few minutes. It probably won’t register that a new device is connected since the outlet already exists in your setup. (If you have Live Logging in the IDE up while the app searches for new devices, you should be able to see it rejoin.)”
/**
* Copyright 2015 SmartThings
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*
* SmartPower Outlet (CentraLite)
*
* Author: SmartThings
* Date: 2015-08-23
*/
metadata {
// Automatically generated. Make future change here.
definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
capability "Actuator"
capability "Switch"
capability "Power Meter"
capability "Configuration"
capability "Refresh"
capability "Sensor"
// indicates that device keeps track of heartbeat (in state.heartbeat)
attribute "heartbeat", "string"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
}
// simulator metadata
simulator {
// status messages
status "on": "on/off: 1"
status "off": "on/off: 0"
// reply messages
reply "zcl on-off on": "on/off: 1"
reply "zcl on-off off": "on/off: 0"
}
preferences {
section {
image(name: 'educationalcontent', multiple: true, images: [
"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
])
}
}
// UI tile definitions
tiles(scale: 2) {
multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
}
tileAttribute ("power", key: "SECONDARY_CONTROL") {
attributeState "power", label:'${currentValue} W'
}
}
standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
}
main "switch"
details(["switch","refresh"])
}
}
// Parse incoming device messages to generate events
def parse(String description) {
log.debug "description is $description"
// save heartbeat (i.e. last time we got a message from device)
state.heartbeat = Calendar.getInstance().getTimeInMillis()
def finalResult = zigbee.getKnownDescription(description)
//TODO: Remove this after getKnownDescription can parse it automatically
if (!finalResult && description!="updated")
finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
if (finalResult) {
log.info finalResult
if (finalResult.type == "update") {
log.info "$device updates: ${finalResult.value}"
}
else if (finalResult.type == "power") {
def powerValue = (finalResult.value as Integer)/10
sendEvent(name: "power", value: powerValue)
/*
Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
power level is an integer. The exact power level with correct units needs to be handled in the device type
to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
*/
}
else {
sendEvent(name: finalResult.type, value: finalResult.value)
}
}
else {
log.warn "DID NOT PARSE MESSAGE for description : $description"
log.debug zigbee.parseDescriptionAsMap(description)
}
}
def off() {
zigbee.off()
}
def on() {
zigbee.on()
}
def refresh() {
sendEvent(name: "heartbeat", value: "alive", displayed:false)
zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
}
def configure() {
zigbee.onOffConfig() + powerConfig() + refresh()
}
//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
//min change in value is 01
def powerConfig() {
[
"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
"zcl global send-me-a-report 0x0B04 0x050B 0x29 6400 6401 {64 0000}", //The send-me-a-report is custom to the attribute type for CentraLite
"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
]
}
private getEndpointId() {
new BigInteger(device.endpointId, 16).toString()
}
//TODO: Remove this after getKnownDescription can parse it automatically
def getPowerDescription(descMap) {
def powerValue = "undefined"
if (descMap.cluster == "0B04") {
if (descMap.attrId == "050b") {
if(descMap.value!="ffff")
powerValue = zigbee.convertHexToInt(descMap.value)
}
}
else if (descMap.clusterId == "0B04") {
if(descMap.command=="07"){
return [type: "update", value : "power (0B04) capability configured successfully"]
}
}
if (powerValue != "undefined"){
return [type: "power", value : powerValue]
}
else {
return [:]
}
}