# Smart key device **URL:** \ **Category:** Devices & Integrations\ **Created:** [January 26, 2017, 7:46pm UTC](https://community.smartthings.com/t/smart-key-device/75573 "2017-01-26T19:46:19Z")\ **Posts on this page:** 1\ **Showing post:** 13
**Author:** ![GGexe](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ggexe/32/131227_2.png) [@GGexe](https://community.smartthings.com/u/GGexe)\ **Post date:** [January 27, 2017, 8:11pm UTC](https://community.smartthings.com/t/smart-key-device/75573/13 "2017-01-27T20:11:13Z")
Guys!!! What about this? [https://store.kontakt.io/?category=cta&from=blog&medium=cta](https://store.kontakt.io/?category=cta&from=blog&medium=cta) someone create a DTH 🙂 A more elegant method? > [@Android Presence using Beacons/Autolocation/Sharptools](https://community.smartthings.com/t/android-presence-using-beacons-autolocation-sharptools/74056): > > I have created an app that uses several tools to determine overall and precise locations within the house using beacons. This uses very little power and should be relatively simple to setup. The files are located here: [https://github.com/mlebaugh/TaskerBeacons](https://github.com/mlebaugh/TaskerBeacons) if you have the following apps. How this works, uses Autolocation and wifi connected to determine if you are home. Basically the same as [this post](https://community.smartthings.com/t/how-to-smartthings-presence-reporting-using-tasker-sharptools-autolocation/70564) This will then set a smartthings presence sensor “User Home” to present. Once the user is home the app will wait for you to walk, once you start walking it will scan for beacons. The beacon radar app reports every ping back to tasker. Tasker will not scan continuously while walking, but every few seconds. Auto tools will then average all of the pings to determine the average RSSI (reciev… --- _[View the full topic](https://community.smartthings.com/t/smart-key-device/75573)._