Smart 3 way switch troubles

[jhamstead]

I created an FAQ for installing GE switches in a three-way setup. You only need the neutral and line in one of the switch boxes to get them to work. Let me know if you have any additional questions and/or take pictures of your current setup for community input.

[FAQ] GE 3-Way Wiring

I’ve decided to put this FAQ together to help those with questions about installing GE 3-way switches. Definitions of terms: Line: The hot wire from the breaker (usually black) Neutral: The return wire for circuits (usually white) Load: The wire that will be hot when the circuit is completed to your light (usually black) Traveler: In existing 3-way wiring, this wire toggles hot between two switches. In a smart switch 3-way configuration, a smaller charge is looped through the add-on switch. Some things to know: 3-way wiring for smart switches is different than standard 3 way wiring. You cannot use dumb 3-way switches with most smart switches (You must purchase the matching GE add-on switch to wire with your GE smart master switch). If the line is wired into the light fixture, you …