# Simple Zwave or Zigbee relay for Garage Door opener?

**URL:** <https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192>\
**Category:** Connected Things\
**Created:** [February 26, 2013, 10:01am UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192 "2013-02-26T10:01:59Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![matthewnohr](https://avatars.discourse-cdn.com/v4/letter/m/6a8cbe/32.png) [@matthewnohr](https://community.smartthings.com/u/matthewnohr)\
**Post date:** [May 16, 2013, 9:29am UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/21 "2013-05-16T09:29:31Z")

</div>

I’m using the multi sensor for telling me if the door is open or closed. I was able to get it set up just using the open/closed feature by putting on part of the sensor on the door and one on the rail of the garage door. If that didn’t work, I was going to use the 3-axis sensor (XYZ) to determine the orientation of the sensor, which would tell me if it was open or not.

---

<div class="post-metadata">

**Author:** ![cusas](https://avatars.discourse-cdn.com/v4/letter/c/cdc98d/32.png) [@cusas](https://community.smartthings.com/u/cusas)\
**Post date:** [July 14, 2013, 9:57pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/22 "2013-07-14T21:57:07Z")

</div>

Check this out. Has anyone else done this. What wires do you need to connect?

---

<div class="post-metadata">

**Author:** ![coolcatiger](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/coolcatiger/32/12643_2.png) [@coolcatiger](https://community.smartthings.com/u/coolcatiger)\
**Post date:** [July 15, 2013, 8:21am UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/23 "2013-07-15T08:21:57Z")

</div>

I have done it, it shows me when the doop is opening or closig etc. very cool.  
This is how I built it using

1. Intermatic [http://www.amazon.com/Intermatic-HA01C-Settings-Wireless-Receptacle/dp/B000WS6OZU](http://www.amazon.com/Intermatic-HA01C-Settings-Wireless-Receptacle/dp/B000WS6OZU) ( got 6 pack for @80)
2. 12v dc relay [http://www.amazon.com/gp/product/B008MPKF4Q/ref=wms\_ohs\_product?ie=UTF8&psc=1](http://www.amazon.com/gp/product/B008MPKF4Q/ref=wms_ohs_product?ie=UTF8&psc=1)
3. ST multisense

I followed instructions for connecting relay from [https://www.youtube.com/watch?v=W8RtzUgupDI](https://www.youtube.com/watch?v=W8RtzUgupDI)

---

<div class="post-metadata">

**Author:** ![chrisb](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/chrisb/32/264_2.png) [@chrisb](https://community.smartthings.com/u/chrisb)\
**Post date:** [July 15, 2013, 11:28am UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/24 "2013-07-15T11:28:15Z")

</div>

Do you have it setup so that tapping the open/close sensor activates the outlet to open/close the garage?

---

<div class="post-metadata">

**Author:** ![apostlepd](https://avatars.discourse-cdn.com/v4/letter/a/6bbea6/32.png) [@apostlepd](https://community.smartthings.com/u/apostlepd)\
**Post date:** [July 15, 2013, 3:44pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/25 "2013-07-15T15:44:23Z")

</div>

the best relay that is out there and simplest/easiest to install the the FORTREZZ MIMOLITE. It’s available from an eBay seller Lorenz-HD and the cost has gone up recently to around $90. However, with it’s simple two-wire installation and a diagram available on their website, it is so easy, anyone can do it.

It works great with SmartThings and I have been using it for a month or so now without failure or disconnection.

---

<div class="post-metadata">

**Author:** ![coolcatiger](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/coolcatiger/32/12643_2.png) [@coolcatiger](https://community.smartthings.com/u/coolcatiger)\
**Post date:** [July 16, 2013, 11:15am UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/26 "2013-07-16T11:15:04Z")

</div>

@chrisb yes , in ide you have to chnage device type to ZWave Virtual Momentary Contact Switch, SmartSense Virtual Garage Sensor Button

---

<div class="post-metadata">

**Author:** ![solardave1](https://avatars.discourse-cdn.com/v4/letter/s/5e9695/32.png) [@solardave1](https://community.smartthings.com/u/solardave1)\
**Post date:** [July 17, 2013, 5:29pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/27 "2013-07-17T17:29:12Z")

</div>

i dont have the info in front of me but here are timer relays out there and have been forever. they trip on power and then time out and reset after a period of time. you might be able to hack something together with those - theyre like 5 bucks a pop.

---

<div class="post-metadata">

**Author:** ![dlieberman](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dlieberman/32/11827_2.png) [@dlieberman](https://community.smartthings.com/u/dlieberman)\
**Post date:** [July 18, 2013, 6:09pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/28 "2013-07-18T18:09:17Z")

</div>

The Z-Wave Virtual Momentary Contact Switch works with any Z-Wave relay that acts as a switch - the device type just sends an on command, waits two seconds, and sends an off command.

---

<div class="post-metadata">

**Author:** ![longhorn84](https://avatars.discourse-cdn.com/v4/letter/l/e495f1/32.png) [@longhorn84](https://community.smartthings.com/u/longhorn84)\
**Post date:** [April 23, 2014, 1:01pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/29 "2014-04-23T13:01:13Z")

</div>

I have a home gate that I’m hoping to set up with some type of automation similar to this garage concept. The gate has a little control board with a manual open/close button that I think I can solder the back of to some type of Z-Wave device. Then I can install the “garage door” app you’re referring to and work my gate from the smartthings app. Do you think the Evolve device is the most efficient if money is not a factor? [http://www.smarthome-products.com/p-2975-evolve-lfm-20-20a-z-wave-relay-fixture-module.aspx](http://www.smarthome-products.com/p-2975-evolve-lfm-20-20a-z-wave-relay-fixture-module.aspx)

---

<div class="post-metadata">

**Author:** ![haworld](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/haworld/32/40585_2.png) [@haworld](https://community.smartthings.com/u/haworld)\
**Post date:** [April 25, 2014, 11:05am UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/30 "2014-04-25T11:05:24Z")

</div>

Hi everyone, just thought I would chime in here. Everybody seems to be linking to the Evolve LFM-20, they sell for about $60. Linear actually makes all Evolve products so if you want an LFM-20, buy the [Linear FS20Z-1](http://shop.haworldonline.com/Linear-Z-Wave-20A-Isolated-Contact-Fixture-Module-Model-FS20Z-1-11262.htm "Linear FS20Z-1") instead, we sell them for almost $20 cheaper and they are the exact same device!

---

<div class="post-metadata">

**Author:** ![longhorn84](https://avatars.discourse-cdn.com/v4/letter/l/e495f1/32.png) [@longhorn84](https://community.smartthings.com/u/longhorn84)\
**Post date:** [April 25, 2014, 11:11am UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/31 "2014-04-25T11:11:28Z")

</div>

Thanks!

---

<div class="post-metadata">

**Author:** ![lmosenko](https://avatars.discourse-cdn.com/v4/letter/l/a698b9/32.png) [@lmosenko](https://community.smartthings.com/u/lmosenko)\
**Post date:** [October 20, 2014, 6:35pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/32 "2014-10-20T18:35:55Z")

</div>

**Here is my Recipe for a Z-Wave ST Secured and Automated Garage Door:**

**Items needed:**

1. GE Z-Wave Fluorescent Light & Appliance Module 45603
2. LINEAR FS20Z-1 Z-Wave 20-Amp Fixture Mount Control
3. SmartSense Multi sensor
4. Shielded computer cable (strip the 3-wires)
5. Old fashion garage door clicker which you already have!
6. Solder and Soldering Iron.
7. ST app on your phone.

**Instructions** :

1. Strip one end of the computer power cable (the end which is not used to connect to the wall).  
a. Wight/Black/Green
2. Connect Wight/Black/Green wires from the LINEAR FS20Z-1 device to the striped wire ends on the power cable.
3. Solder the connected wires from Step 2 together with the soldering iron.
4. Connect and solder the 2 blew wires to the circuit board of the clicker connection of the button.
5. Use wire nuts or electric tape in order to cover exposed wire ends.
6. Connect the power cable to the outlet and pair the LINEAR FS20Z-1 Z-wave relay.
7. Pair with the ST Hub and test to see if it activates the garage door.
8. Connect the GE Z-Wave Light & Appliance Module between the garage power cable and the line.  
a. Make certain to connect the garage door to the Z-wave outlet side of the module.
9. Pair the GE Z-Wave Light & Appliance Module with the ST Hub.
10. Attach the SmartSense Multi to the garage door.
11. Open the ST app and setup with one of the two methods:  
a. Use the Smart Sense presence Sensors  
i. When someone with a presence sensor comes home turn on  
1. GE light & appliance module  
2. LENIER Z-wave relay.  
b. Use one of your “Hello Home” actions:  
i. When the house is in “I’m Back” mode turn on:  
1. GE light & appliance module  
2. LENIER Z-wave relay.
12. Setup an “Alert” in the ST app using the “Valuables” option to alert you if the sensor is opened.  
a. Optional: Trigger the Siren.

**Test it out and your garage door will magically open for you!**  
I will post some photos later on to demonstrate how it worked for me.  
In my opinion, this is the most secure way to protect and automate your garage door.

---

<div class="post-metadata">

**Author:** ![ankitprasad](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ankitprasad/32/177635_2.png) [@ankitprasad](https://community.smartthings.com/u/ankitprasad)\
**Post date:** [September 3, 2015, 10:01pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/33 "2015-09-03T22:01:23Z")

</div>

> [@coolcatiger](#):
>
> ZWave Virtual Momentary Contact Switch

How do I change a relay to a virtual momentary one? Is this a setting I can just set in the app when I connect a Z-Wave relay?

---

<div class="post-metadata">

**Author:** ![coolcatiger](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/coolcatiger/32/12643_2.png) [@coolcatiger](https://community.smartthings.com/u/coolcatiger)\
**Post date:** [September 4, 2015, 1:16pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/34 "2015-09-04T13:16:10Z")

</div>

you need access to ide website of ST. email support and ask for access and then you can change device type.

---

<div class="post-metadata">

**Author:** ![lmosenko](https://avatars.discourse-cdn.com/v4/letter/l/a698b9/32.png) [@lmosenko](https://community.smartthings.com/u/lmosenko)\
**Post date:** [September 9, 2015, 4:59pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/35 "2015-09-09T16:59:33Z")

</div>

If you fallow my instruction for the most part, when you are asked about what type of a door it is (Conventional or Garage Door), you should choose Garage Door and it will automatically change the device type to this  
 ![](https://global.discourse-cdn.com/smartthings/original/3X/4/8/486248b5ae083e9047a4fe5b20f0c1a9649ecbba.png)

---

<div class="post-metadata">

**Author:** ![joshuairl](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/joshuairl/32/23901_2.png) [@joshuairl](https://community.smartthings.com/u/joshuairl)\
**Post date:** [January 13, 2016, 5:01pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/36 "2016-01-13T17:01:44Z")

</div>

> [@coolcatiger](#):
>
> I have done it, it shows me when the doop is opening or closig etc. very cool.This is how I built it using1. Intermatic [http://www.amazon.com/Intermatic-HA01C-Settings-Wireless-Receptacle/dp/B000WS6OZU](http://www.amazon.com/Intermatic-HA01C-Settings-Wireless-Receptacle/dp/B000WS6OZU) ( got 6 pack for @80)2. 12v dc relay [http://www.amazon.com/gp/product/B008MPKF4Q/ref=wms\_ohs\_product?ie=UTF8&psc=13](http://www.amazon.com/gp/product/B008MPKF4Q/ref=wms_ohs_product?ie=UTF8&psc=13). ST multisense
> 
> I followed instructions for connecting relay from [https://www.youtube.com/watch?v=W8RtzUgupDI](https://www.youtube.com/watch?v=W8RtzUgupDI)

Why is it 240VAC vs 120 or even 110?

---

<div class="post-metadata">

**Author:** ![joshuairl](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/joshuairl/32/23901_2.png) [@joshuairl](https://community.smartthings.com/u/joshuairl)\
**Post date:** [January 13, 2016, 5:11pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/37 "2016-01-13T17:11:20Z")

</div>

Would something like these work to wire up to a z-wave outlet switch with a stripped off power cord to the outlet and the 2 wires to the opener?  
I’m looking for DIY since I’m not interested in spending the extra money for the pre-made systems.

> **[Amazon.com: AC 110V-120V Coil Voltage Red Lamp DPDT 8Pin Power Relay + Socket Base: Home Improvement](https://www.amazon.com/110V-120V-Voltage-Power-Relay-Socket/dp/B00S4YO3J8/ref=sr_1_3?s=hi&ie=UTF8&qid=1452704867&sr=1-3&keywords=120v+coil+relay+with+socket+base)**
>
> Clear plastic housing. Can adjust automatically, protect and transform the electric circuit. Used widely in the remote control, communication, automatic control system, electronic equipments, etc.

---

<div class="post-metadata">

**Author:** ![jh0](https://avatars.discourse-cdn.com/v4/letter/j/b38774/32.png) [@jh0](https://community.smartthings.com/u/jh0)\
**Post date:** [January 13, 2016, 8:01pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/38 "2016-01-13T20:01:38Z")

</div>

A standalone relay would probably work, but wouldn’t be a very clean solution. I was also looking for a cheaper option and ended up using the Remotec ZFM-80. I stuck it in a plastic handy box with an appliance power cord, mounted it next to my opener, wired the contact in parallel with the existing button, and done! Happy with the result, and it was less than $50.

> **[Remotec Zwave Dry Contact Fixture Module - Home Security Systems - Amazon.com](https://www.amazon.com/gp/product/B00913ATFI)**
>
> Remotec ZFM-80 Dry Contact Switch Module The Remotec ZFM-80 Dry Contact Switch Module allows users to remotely control lighting, home appliance, and make home control easy at low installation / mainte ...

> **[1-Gang 12 cu. in. Electrical Handy Box-B112HBR - The Home Depot](https://www.homedepot.com/p/1-Gang-12-cu-in-Electrical-Handy-Box-B112HBR/202077374)**
>
> Visit the Home Depot to buy Carlon 1-Gang 12 cu. in. Electrical Handy Box B112HBR

> **[1-Gang Blank Handy Box Cover (Case of 25)-HB1BL - The Home Depot](https://www.homedepot.com/p/1-Gang-Blank-Handy-Box-Cover-Case-of-25-HB1BL/205351309)**
>
> The Blank Handy Box Cover is used to close off an electrical box not in use. This box cover offers a 1/2 in. knockout for access into the box without needing to remove the entire cover. Made of durable,

> **[HDX 6 ft. 16/3 SPT-3 Appliance Cord in Gray-HD#588-547 - The Home Depot](https://www.homedepot.com/p/HDX-6-ft-16-3-SPT-3-Appliance-Cord-in-Gray-HD-588-547/100672804)**
>
> Get the 6 ft. Gray 16/3 SPT-3 Appliance Cord HD#588-547, tinned, stripped ends replace the wiring on an indoor appliance, such as a pump or garbage disposal from The Home Depot

---

<div class="post-metadata">

**Author:** ![lmosenko](https://avatars.discourse-cdn.com/v4/letter/l/a698b9/32.png) [@lmosenko](https://community.smartthings.com/u/lmosenko)\
**Post date:** [January 14, 2016, 6:08pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/39 "2016-01-14T18:08:41Z")

</div>

@joshuairl  
You should go through my automation for the garage!

This is what I have been using since the beginning of the ST:  
[http://www.amazon.com/GoControl-Z-Wave-Isolated-Contact-Fixture/dp/B00ER6MH22/ref=sr\_1\_2?s=hi&ie=UTF8&qid=1452794743&sr=1-2&keywords=z-wave+relay](http://www.amazon.com/GoControl-Z-Wave-Isolated-Contact-Fixture/dp/B00ER6MH22/ref=sr_1_2?s=hi&ie=UTF8&qid=1452794743&sr=1-2&keywords=z-wave+relay)

[https://community.smartthings.com/t/garage-door-gate-automation-with-linear-relay-st-v-2-app-updated/5975](https://community.smartthings.com/t/garage-door-gate-automation-with-linear-relay-st-v-2-app-updated/5975)

---

<div class="post-metadata">

**Author:** ![meow4agc](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/meow4agc/32/123858_2.png) [@meow4agc](https://community.smartthings.com/u/meow4agc)\
**Post date:** [November 2, 2016, 8:37pm UTC](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192/40 "2016-11-02T20:37:46Z")

</div>

@lmosenko can you explain to me why you have the Z-Wave Light & Appliance Module here? I would think the relay only would work OK.

I know this is an old topic, but it’s the best description for a Garage Door Opener DIY I found so far.

[Previous page](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192.md?page=1)

[Next page](https://community.smartthings.com/t/simple-zwave-or-zigbee-relay-for-garage-door-opener/192.md?page=3)
