# Shelly 1PM Gen3 with temperature sensor HubV3 Fritzbox

**URL:** <https://community.smartthings.com/t/shelly-1pm-gen3-with-temperature-sensor-hubv3-fritzbox/307543>\
**Category:** Devices & Integrations\
**Created:** [January 19, 2026, 8:43am UTC](https://community.smartthings.com/t/shelly-1pm-gen3-with-temperature-sensor-hubv3-fritzbox/307543 "2026-01-19T08:43:05Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![TapioX](https://avatars.discourse-cdn.com/v4/letter/t/90ced4/32.png) [@TapioX](https://community.smartthings.com/u/TapioX)\
**Post date:** [January 20, 2026, 9:56am UTC](https://community.smartthings.com/t/shelly-1pm-gen3-with-temperature-sensor-hubv3-fritzbox/307543/6 "2026-01-20T09:56:22Z")

</div>

> [@Hobby-schrauber](#):
>
> Must the shelly at first integrated in the shelly app?

I don’t know. I have only used Shelly local web tool.

You can see temperature sensor 's value in Shelly App or Shelly web interface.

_You have installed the driver on your hub and then after installation you have run Scan nearby._

* * *

I use MQTT communication to/from Shelly Devices

> [@Integration Solutions using MQTT](https://community.smartthings.com/t/integration-solutions-using-mqtt/245186/620):
>
> The device is Shelly 1 Gen3.
> 
> I wanted to use local communications to ST Hub.  
> I didn’t want add more drivers to the Hub and decided to try MQTT communication.  
> I already had the MQTT Devices driver ready to use.
> 
> MQTT communication seems to work using MQTT Devices driver.

---

_[View the full topic](https://community.smartthings.com/t/shelly-1pm-gen3-with-temperature-sensor-hubv3-fritzbox/307543)._