# Set ZWave Parameter

**URL:** <https://community.smartthings.com/t/set-zwave-parameter/1678>\
**Category:** General Discussion\
**Tags:** archive\_developers\
**Created:** [April 18, 2014, 9:58pm UTC](https://community.smartthings.com/t/set-zwave-parameter/1678 "2014-04-18T21:58:49Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![zj4x4](https://avatars.discourse-cdn.com/v4/letter/z/aca169/32.png) [@zj4x4](https://community.smartthings.com/u/zj4x4)\
**Post date:** [April 18, 2014, 9:58pm UTC](https://community.smartthings.com/t/set-zwave-parameter/1678/1 "2014-04-18T21:58:49Z")

</div>

I have an Everspring ST814 thermometer that I have been struggling with since January. It works fine but doesn’t report anything to ST. It looks like I may need to set a configuration parameter via ZWave but I have no idea how one would accomplish this. I found a thread on micasaverde where people have done this successfully:

[http://forum.micasaverde.com/index.php/topic,8510.15.html?PHPSESSID=ffc940c3b20d8c251dad30f8cf4b1c98](http://forum.micasaverde.com/index.php/topic,8510.15.html?PHPSESSID=ffc940c3b20d8c251dad30f8cf4b1c98)

What I believe I need to do is set parameter 6 to the time interval at which I’d like the thermometer to report the data. The manual is here:

> **[ST814.pdf](https://www.homeseer.com/pdfs/Everspring/ST814.pdf)**
>
> 272.44 KB

On page 6 the table on the right side shows the parameters. Line 6 of that table is the one I’m trying to set. Any ideas on how to accomplish this?

---

<div class="post-metadata">

**Author:** ![zj4x4](https://avatars.discourse-cdn.com/v4/letter/z/aca169/32.png) [@zj4x4](https://community.smartthings.com/u/zj4x4)\
**Post date:** [April 19, 2014, 9:38am UTC](https://community.smartthings.com/t/set-zwave-parameter/1678/2 "2014-04-19T09:38:50Z")

</div>

Disregard - got it working with help from another forum member.

---

<div class="post-metadata">

**Author:** ![twack](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/twack/32/18039_2.png) [@twack](https://community.smartthings.com/u/twack)\
**Post date:** [April 19, 2014, 10:28am UTC](https://community.smartthings.com/t/set-zwave-parameter/1678/3 "2014-04-19T10:28:23Z")

</div>

Please share the answer for others 😁

---

<div class="post-metadata">

**Author:** ![thrash99er](https://avatars.discourse-cdn.com/v4/letter/t/e9c0ed/32.png) [@thrash99er](https://community.smartthings.com/u/thrash99er)\
**Post date:** [April 19, 2014, 6:21pm UTC](https://community.smartthings.com/t/set-zwave-parameter/1678/4 "2014-04-19T18:21:43Z")

</div>

Bump

---

<div class="post-metadata">

**Author:** ![ben1](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ben1/32/288_2.png) [@ben1](https://community.smartthings.com/u/ben1)\
**Post date:** [April 19, 2014, 9:52pm UTC](https://community.smartthings.com/t/set-zwave-parameter/1678/5 "2014-04-19T21:52:14Z")

</div>

See this thread here: [http://build.smartthings.com/forums/topic/anyone-using-a-temperature-sensor-other-than-multi-ones/page/2/](http://build.smartthings.com/forums/topic/anyone-using-a-temperature-sensor-other-than-multi-ones/page/2/)

It appears to work, but I still need to clean the device type up. I used some of the logic from the Aeon Labs Multi, EverSpring Flood Sensor and then the ST814 manual to figure out the configuration values.

---

<div class="post-metadata">

**Author:** ![broox](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/broox/32/12000_2.png) [@broox](https://community.smartthings.com/u/broox)\
**Post date:** [July 16, 2014, 10:30pm UTC](https://community.smartthings.com/t/set-zwave-parameter/1678/6 "2014-07-16T22:30:11Z")

</div>

For anyone trying to access that dead link, try here: [Anyone using a temperature sensor other than multi ones?](http://community.smartthings.com/t/anyone-using-a-temperature-sensor-other-than-multi-ones/805/20)