# Schlage Z-wave door set $239 ( 20% off) HD **URL:** \ **Category:** Deals\ **Created:** [May 9, 2016, 5:50pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473 "2016-05-09T17:50:09Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![RLDreams](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/rldreams/32/18109_2.png) [@RLDreams](https://community.smartthings.com/u/RLDreams)\ **Post date:** [May 9, 2016, 5:50pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/1 "2016-05-09T17:50:09Z")
Home Depot pro deal of the weak is Schlage connect door sets ( lock and handset ) for $239.20 . > **[Schlage Camelot Satin Nickel Connect Smart Lock with Alarm and Left Handed...](https://www.homedepot.com/p/Schlage-Camelot-Satin-Nickel-Connect-Smart-Lock-with-Alarm-and-Left-Handed-Accent-Lever-Handleset-FE469NX-ACC-619-CAM-LH/204793909)** > > Add a stylish look to your doors with this Schlage Connect Camelot Satin Nickel Touchscreen Deadbolt with Alarm and Handleset with Accent Interior Lever. ---
**Author:** ![elf](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/elf/32/27022_2.png) [@elf](https://community.smartthings.com/u/elf)\ **Post date:** [May 9, 2016, 6:15pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/2 "2016-05-09T18:15:42Z")
> [@RLDreams](#): > > Home Depot pro deal of the weak is Schlage connect door sets ( lock and handset ) for $23920 Wow … I can buy a car for that amount 😉 ---
**Author:** ![RLDreams](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/rldreams/32/18109_2.png) [@RLDreams](https://community.smartthings.com/u/RLDreams)\ **Post date:** [May 9, 2016, 6:17pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/3 "2016-05-09T18:17:05Z")
> [@elf](#): > > Wow … I can buy a car for that amount 😉 Sticky keys LOL ---
**Author:** ![tommyincville](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/tommyincville/32/71155_2.png) [@tommyincville](https://community.smartthings.com/u/tommyincville)\ **Post date:** [May 10, 2016, 3:51am UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/4 "2016-05-10T03:51:17Z")
> [@Schlage Z-wave door set $239 ( 20% off) HD](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473): > > Home Depot pro deal of the weak is Schlage connect door sets ( lock and handset ) for $239.20 . Just installed a 2nd Schlage Camelot this evening. I needed a lager hole (2.125") in this door and had to run to Lowes for their Irwin lock set jig set $15. Once the hole was resized it took about 5 minutes to install and connect to the hub. The 1st one has been in for about 2 weeks and is working as it should.Battery still at 100% Other than being a bit loud I like them. ---
**Author:** ![ispy](https://avatars.discourse-cdn.com/v4/letter/i/a87d85/32.png) [@ispy](https://community.smartthings.com/u/ispy)\ **Post date:** [May 10, 2016, 11:27am UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/5 "2016-05-10T11:27:45Z")
love mine - just have the deadbolt. wish i could get the piece of s to work with ST. ---
**Author:** ![RLDreams](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/rldreams/32/18109_2.png) [@RLDreams](https://community.smartthings.com/u/RLDreams)\ **Post date:** [May 10, 2016, 11:55am UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/6 "2016-05-10T11:55:27Z")
> [@ispy](#): > > love mine - just have the deadbolt. wish i could get the piece of s to work with ST. What’s the issue ? I have 2 of the dead bolts and they work perfect with ST. ( Using custom device type and lock code manager ) ---
**Author:** ![chadmoss](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/chadmoss/32/117312_2.png) [@chadmoss](https://community.smartthings.com/u/chadmoss)\ **Post date:** [May 10, 2016, 11:59am UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/7 "2016-05-10T11:59:03Z")
What issue are you having? I ended up going wth a custom device manager, but I never had any issues getting mine to work with ST. ---
**Author:** ![ispy](https://avatars.discourse-cdn.com/v4/letter/i/a87d85/32.png) [@ispy](https://community.smartthings.com/u/ispy)\ **Post date:** [May 10, 2016, 12:59pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/8 "2016-05-10T12:59:27Z")
I have had the lock installed for months. Just got ST. ST never sees it. I tried the instructions here and never seems to find it. I use the schlage sense app and I think it says you cannot use manual programming in the book. Guess I need to factory default it and start over. Hub was within inches of lock. ---
**Author:** ![chadmoss](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/chadmoss/32/117312_2.png) [@chadmoss](https://community.smartthings.com/u/chadmoss)\ **Post date:** [May 10, 2016, 1:23pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/9 "2016-05-10T13:23:53Z")
Might not hurt - not sure what you mean by “you cannot use manual programming” though. ---
**Author:** ![tommyincville](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/tommyincville/32/71155_2.png) [@tommyincville](https://community.smartthings.com/u/tommyincville)\ **Post date:** [May 10, 2016, 2:32pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/10 "2016-05-10T14:32:49Z")
> [@Schlage Z-wave door set $239 ( 20% off) HD](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/8): > > I have had the lock installed for months. Just got ST. ST never sees it. I tried the instructions here and never seems to find it. I use the schlage sense app and I think it says you cannot use manual programming in the book. Guess I need to factory default it and start over. Hub was within inches of lock. I had a little issue pairing the one I installed last night. I had to exclude it twice (put the app in zwave exclude mode, press the Schlage button on the keypad, enter the 6 digit code then press zero) After the first exclusion I got a red X, Excluded it again and still and red X. After the 2nd exclusion and 3rd try I got the green check mark. It was very very 10-15 slow to respond on the first 6-7 cycles of open close, then responded quickly. (To pair: press the Schlage button on the keypad, enter the 6 digit code then press zero) ---
**Author:** ![ispy](https://avatars.discourse-cdn.com/v4/letter/i/a87d85/32.png) [@ispy](https://community.smartthings.com/u/ispy)\ **Post date:** [May 10, 2016, 2:34pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/11 "2016-05-10T14:34:43Z")
i was using the instructions i found here - press inside button, enter programming code, and 0. after doing so i never saw any lights flash on the lock. in the manual - i will find it shortly, it says that if you have enabled programming via the Sense App, manual programming is disabled. ---
**Author:** ![chadmoss](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/chadmoss/32/117312_2.png) [@chadmoss](https://community.smartthings.com/u/chadmoss)\ **Post date:** [May 10, 2016, 2:46pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/12 "2016-05-10T14:46:58Z")
You don’t use the inside button - you press the Schlage button outside - then the programming code…at least on mine… ---
**Author:** ![ispy](https://avatars.discourse-cdn.com/v4/letter/i/a87d85/32.png) [@ispy](https://community.smartthings.com/u/ispy)\ **Post date:** [May 10, 2016, 2:49pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/13 "2016-05-10T14:49:33Z")
you are correct. i tried both and got no response. question - when i enter the programming sequence should the green check light up? i never get that acknowledgement or any kind from the lock that it is in the proper mode. ---
**Author:** ![sgnihttrams](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/sgnihttrams/32/32358_2.png) [@sgnihttrams](https://community.smartthings.com/u/sgnihttrams)\ **Post date:** [May 10, 2016, 2:50pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/14 "2016-05-10T14:50:47Z")
> [@RLDreams](#): > > Home Depot pro deal of the weak is Schlage connect door sets ( lock and handset ) for $239.20 . > > [http://www.homedepot.com/p/Schlage-Connect-Camelot-Satin-Nickel-Touchscreen-Deadbolt-with-Alarm-and-Handleset-with-Accent-Interior-Lever-FE469NX-ACC-619-CAM-LH/204793909](http://www.homedepot.com/p/Schlage-Connect-Camelot-Satin-Nickel-Touchscreen-Deadbolt-with-Alarm-and-Handleset-with-Accent-Interior-Lever-FE469NX-ACC-619-CAM-LH/204793909) Sorry so dense, but is this a two-door set, or just for one door? I’m not sure what all of the different pieces are for, and it looks like there are pieces enough for two doors, but I’m sure I’m looking at it wrong lol EDIT: Actually, I get it now. It’s for one door; both sides get a deadbolt piece and a door handle piece. 🙂 ---
**Author:** ![chadmoss](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/chadmoss/32/117312_2.png) [@chadmoss](https://community.smartthings.com/u/chadmoss)\ **Post date:** [May 10, 2016, 3:04pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/15 "2016-05-10T15:04:20Z")
When you enter the programming code, there should be a small amber light (round) below the keys that comes on to tell you that you are in programming mode…then you should be looking for new devices in ST when you hit 0 - if it finds it, you will get a green check. ---
**Author:** ![Bry](https://avatars.discourse-cdn.com/v4/letter/b/aeb1de/32.png) [@Bry](https://community.smartthings.com/u/Bry)\ **Post date:** [May 10, 2016, 8:39pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/16 "2016-05-10T20:39:23Z")
Also on Amazon if HD runs out. > **[Schlage Connect Camelot Touchscreen Deadbolt with Built-In Alarm and Handleset Grip with Accent Lever, Satin Nickel, FE469NX ACC 619 CAM RH - Door Levers - Amazon.com](https://www.amazon.com/Schlage-FE469NX-ACC-619-CAM/dp/B00D1M632S/ref=sr_1_fkmr1_2?ie=UTF8&qid=1462912671&sr=8-2-fkmr1&keywords=Connect+Camelot+Satin+Nickel+Touchscreen+Deadbolt+with+Alarm+and+Handleset+with+Accent+Interior+Lever+4.6+out+of+5+%2844%29+Write+a+Review+Questions+%26+Answers+%2857%29&pldnSite=1)** > > At Schlage, we know security. After all, we’ve been innovating locks for more than 90 years. Now, with the Touchscreen Deadbolt, we’ve created a door lock that combines all of our best security featur ... ---
**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\ **Post date:** [May 10, 2016, 10:32pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/17 "2016-05-10T22:32:46Z")
> [@ispy](#): > > I have had the lock installed for months. Just got ST. ST never sees it. I tried the instructions here and never seems to find it. I use the schlage sense app and I think it says you cannot use manual programming in the book. Guess I need to factory default it and start over. > > Hub was within inches of lock. The Schlage Sense model is the one for HomeKit. It cannot be used with SmartThings. The Schlage Connect zwave version is the model that works with SmartThings. Both are good locks, but only one works with SmartThings. ---
**Author:** ![ispy](https://avatars.discourse-cdn.com/v4/letter/i/a87d85/32.png) [@ispy](https://community.smartthings.com/u/ispy)\ **Post date:** [May 10, 2016, 10:54pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/18 "2016-05-10T22:54:16Z")
Well of course… D%#\*! ---
**Author:** ![ispy](https://avatars.discourse-cdn.com/v4/letter/i/a87d85/32.png) [@ispy](https://community.smartthings.com/u/ispy)\ **Post date:** [May 10, 2016, 11:38pm UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/19 "2016-05-10T23:38:14Z")
smarthubs were the farthest thing from my mind when i got it. i just wanted a keypad lock. oh well… ---
**Author:** ![RLDreams](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/rldreams/32/18109_2.png) [@RLDreams](https://community.smartthings.com/u/RLDreams)\ **Post date:** [May 11, 2016, 12:00am UTC](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473/20 "2016-05-11T00:00:23Z")
> [@ispy](#): > > smarthubs were the farthest thing from my mind when i got it. i just wanted a keypad lock. oh well… Agreed, had our locks for a year, maybe 2 before our first HA hub. Just of tired of buying/ rekeying all the locks every time a tenant moved out [Next page](https://community.smartthings.com/t/schlage-z-wave-door-set-239-20-off-hd/47473.md?page=2)