# Revers Alexa and ST Integration **URL:** \ **Category:** Devices & Integrations\ **Created:** [February 28, 2018, 9:32pm UTC](https://community.smartthings.com/t/revers-alexa-and-st-integration/120394 "2018-02-28T21:32:25Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![scooterpuff](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@scooterpuff](https://community.smartthings.com/u/scooterpuff)\ **Post date:** [February 28, 2018, 9:32pm UTC](https://community.smartthings.com/t/revers-alexa-and-st-integration/120394/1 "2018-02-28T21:32:25Z")
I am using ActionTiles on an Android device as a nice looking control device. I have some TP-Link100 smart plugs. I can control them with the Kasa app on my phone or with Alexa. I know there is no native control for these plugs in ST. Is there a way that I can use ST to link back to my Alexa and through Alexa controle those devices? ---
**Author:** ![Gutheinz](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/gutheinz/32/78310_2.png) [@Gutheinz](https://community.smartthings.com/u/Gutheinz)\ **Post date:** [February 28, 2018, 10:53pm UTC](https://community.smartthings.com/t/revers-alexa-and-st-integration/120394/2 "2018-02-28T22:53:15Z")
There is a HS-100 solution that works with SmartThings directly. See the below. There are instructions at the linked site that tells you how to install (about 5 minutes for an IDE-experienced user, 15 minutes first time. Some suggestions on using Alexa with SmartThings. Enable the SmartThings skill. For those that have SmartThings integration, I remove the skill (i.e., I do not use the Kasa Skill in Alexa). It reduces some confusion. Link: > [@TP-Link/Kasa Bulbs and Plugs Control (Old, Unofficial Integration)](https://community.smartthings.com/t/tp-link-bulbs-and-plugs-control/73921): > > April 26, 2018. Added support for the HS220 Dimming Switch. January 30, 2018. Update to Version 2. Changes a. Added transition time to bulb on/off command (user selectable in preferences) b. Fixed Energy Monitor to accommodate HS110(AU) data formats. c. Commonized menus between Hub and Cloud versions. d. Updated naming conventions to function based, supporting TP-Link’s expanding product line. e. Changed naming conventions to support GitHub integration. Upgrade Recommendation: Do not recommend upgrade unless you need to add device models not in previous baseline. Verification Status: HS100, HS105, HS200 - verified on exact device. HS110 - previous version verified by other users. HS115 - future product, same control as HS110. KP100 - assumed same control as HS100. HS2… ---
**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\ **Post date:** [February 28, 2018, 10:58pm UTC](https://community.smartthings.com/t/revers-alexa-and-st-integration/120394/3 "2018-02-28T22:58:12Z")
> [@scooterpuff](#): > > I am using ActionTiles on an Android device as a nice looking control device. I have some TP-Link100 smart plugs. I can control them with the Kasa app on my phone or with Alexa. I know there is no native control for these plugs in ST. Is there a way that I can use ST to link back to my Alexa and through Alexa controle those devices? The following FAQ should help (this is a clickable link): > [@FAQ: Can I trigger an Echo Action without Speaking to It?](https://community.smartthings.com/t/faq-can-i-trigger-an-echo-action-without-speaking-to-it/117918): > > Breaking News!!! As of August 2018, a SmartThings-connected Contact or Motion Sensor can now trigger an Amazon echo routine if you live in the US, Canada, or the UK !!! Amazon has now added the ability for some sensors to trigger an Amazon echo routine (not a smartthings routine), which does let you trigger other smart home devices which are not connected to SmartThings without having to speak an echo command! Or you can set it up so that your echo devices will speak a customized phrase, play a doorbell chime, or various other sound effects. tada And even better, that contact sensor can be a virtual contact sensor. And although it’s a bit tricky, a community member has created an edge driver that will create BOTH a virtual switch and a virtual sensor and keep the pair in synch. So… But as @gutheinz suggested, you should look into just connecting them to smartthings without using echo in the middle. 🕶 ---
**Author:** ![scooterpuff](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@scooterpuff](https://community.smartthings.com/u/scooterpuff)\ **Post date:** [March 7, 2018, 6:26pm UTC](https://community.smartthings.com/t/revers-alexa-and-st-integration/120394/4 "2018-03-07T18:26:02Z")
Thank you for your help. I found out that I can use Stringify to do what I needed.