###User Lock/Unlock Notifications and Actions - Version 2.1.0
- Added support for receiving unlock notifications based on mode for each user
- Bugfix for jammed and manual lock notifications not coming through always
###User Lock/Unlock Notifications and Actions - Version 2.1.0
###User Lock/Unlock Notifications and Actions - Version 2.2.0
##user Lock/Unlock Notifications and Actions - Version 2.3.0
Thanks to DnCCrew for this step:
To set the hub Location, from smartphone app:
- Clicked on the 3 lines (top right corner)
##user Unlock/Lock Door Notifications and Actions - Version 2.4.0
This functionality only works if the lock supports user code locking/one touch locking via the keypad (e.g. Schalge BE469, Yale YRD220/240) and also requires the use of the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung) device handler version 2.10.1 or later
Thanks to DnCCrew for this step:
To set the hub Location, from smartphone app:
- Clicked on the 3 lines (top right corner)
EDIT: Please note this version has simplified the user interface, so please CHECK and VERIFY your notification settings. These are now on the first page under door lock/unlock actions.
##user Unlock/Lock Door Notifications and Actions - Version 2.4.2
Recommend the use of the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung) device handler version 2.10.1 or later for full SmartApp functionality
Thanks to DnCCrew for this step:
To set the hub Location, from smartphone app:
- Clicked on the 3 lines (top right corner)
EDIT: Please note this version has simplified the user interface, so please CHECK and VERIFY your notification settings. These are now on the first page under door lock/unlock actions.
##user Unlock/Lock Door Notifications and Actions - Version 2.4.3
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung - #364 by RBoy) device handler version 2.10.3 or later for full SmartApp functionality
Thanks to DnCCrew for this step:
To set the hub Location, from smartphone app:
- Clicked on the 3 lines (top right corner)
EDIT: Please note this version has simplified the user interface, so please CHECK and VERIFY your notification settings. These are now on the first page under door lock/unlock actions. Also NOTE that the user lock code based actions require the use of the Universal Enhanced Z-Wave Handler version 2.10.3 or later
###User Unlock/Lock Door Notifications and Actions - Version 3.0.0
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.0 or later for full SmartApp functionality
EDIT: Please note this version has simplified the user interface, so please CHECK and VERIFY your notification settings. These are now on the first page under door lock/unlock actions. Also NOTE that the user lock code based actions require the use of the Universal Enhanced Z-Wave Handler version 3.0.0 or later
###User Unlock/Lock Door Notifications and Actions - Version 3.1.0
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.0 or later for full SmartApp functionality
###User Unlock/Lock Door Notifications and Actions - Version 3.1.1
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.1 or later for full SmartApp functionality
##user Unlock/Lock Door Notifications and Actions - Version 3.1.2
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung - #383 by RBoy) device handler version 3.0.1 or later for full SmartApp functionality
##user Unlock/Lock Door Notifications and Actions - Version 3.1.3
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung - #383 by RBoy) device handler version 3.0.1 or later for full SmartApp functionality
##user Unlock/Lock Door Notifications and Actions - Version 3.1.4
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung) device handler version 3.0.1 or newer for full SmartApp functionality
##user Unlock/Lock Door Notifications and Actions - Version 3.1.5
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung) device handler version 3.0.1 or newer for full SmartApp functionality
##user Unlock/Lock Door Notifications and Actions - Version 3.1.6
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung) device handler version 3.0.1 or newer for full SmartApp functionality
##user Unlock/Lock Door Notifications and Actions - Version 3.1.7
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung) device handler version 3.0.1 or newer for full SmartApp functionality
##user Unlock/Lock Door Notifications and Actions - Version 3.1.8
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung) device handler version 3.0.1 or newer for full SmartApp functionality
##user Unlock/Lock Door Notifications and Actions - Version 3.1.9
Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung) device handler version 3.0.1 or newer for full SmartApp functionality
Cant get notification to work, this is from the logs:
45fbc4a5-0f1c-4bfd-bd7f-fa66b830e00f 15.09.44 CEST: error java.lang.NullPointerException: Cannot get property ‘eaf3c861-343a-44e3-81a6-8e94cafd2442’ on null object @ line 714
45fbc4a5-0f1c-4bfd-bd7f-fa66b830e00f 15.09.44 CEST: info Running unlock Phrase I’m Back!
45fbc4a5-0f1c-4bfd-bd7f-fa66b830e00f 15.09.44 CEST: debug Found per user unlock actions
45fbc4a5-0f1c-4bfd-bd7f-fa66b830e00f 15.09.44 CEST: debug Lock Dør Hovedinngang Lås unlocked by Hovedbruker, notify true, notify modes null, via keypad
45fbc4a5-0f1c-4bfd-bd7f-fa66b830e00f 15.09.44 CEST: trace Event name lock, value unlocked, device Dør Hovedinngang Lås
Did not help. I have started using my contacts, could that have anything to do with it? Notifications seems to work with other apps