[RELEASE] User Unlock/Lock Door Notifications and Actions

smartapp_alerts
notify
smartapp_security
smartapp_locks
rboyapps

(www.rboyapps.com - Make your home your butler!) #10

That’s absolutely correct, the lock doesn’t allow for external control of the alarm. Infact I tried “exploring” it to see if I could catch an undocumented parameter that would allow me to control it but unfortunately no such interface exists.


(Glen King) #11

Bummer. That sends me back to the Bluetooth speaker, or perhaps an alarm module or something. Oh well…


(www.rboyapps.com - Make your home your butler!) #12

###User Lock/Unlock Notifications and Actions - Version 2.1.0

  • Added support for receiving unlock notifications based on mode for each user
  • Bugfix for jammed and manual lock notifications not coming through always

(www.rboyapps.com - Make your home your butler!) #13

###User Lock/Unlock Notifications and Actions - Version 2.2.0

  • Added support for notifying if the door has been left open for a period of time (with mode filters)
  • Added support for automatic relock when controlling multiple doors from a single SmartApp
  • Various other UI improvements
  • Show SmartApp version on the main page

(www.rboyapps.com - Make your home your butler!) #14

###User Lock/Unlock Notifications and Actions - Version 2.3.0

  • On popular request, added option to execute a routine when the Lock button on the external keypad of the lock is pressed. Each locks’s routine can be configured individually. This functionality only works if the lock supports it and also requires the use of the Universal Enhanced Z-Wave Lock device handler version 2.9.0 or later

Thanks to DnCCrew for this step:

To set the hub Location, from smartphone app:

  1. Clicked on the 3 lines (top right corner)
  1. Clicked on gear icon (top right)
  2. Click area that says “Tap to set where home is on the map” and zoom in to correct location on map.

(www.rboyapps.com - Make your home your butler!) #15

###User Unlock/Lock Door Notifications and Actions - Version 2.4.0

  • On popular request, added option to execute a routine when the Lock button on the external keypad of the lock is pressed. Each locks’s routine can be configured individually.
  • Also added the ability to set individual actions when users use their codes to lock the door. e.g. Run Routine X when user 1 locks the door using their code and do nothing if user 2 locks using their code.
  • Also added the ability to display tamper notifications in addition to jammed and invalidCode notifications

This functionality only works if the lock supports user code locking/one touch locking via the keypad (e.g. Schalge BE469, Yale YRD220/240) and also requires the use of the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 2.10.1 or later

Thanks to DnCCrew for this step:

To set the hub Location, from smartphone app:

  1. Clicked on the 3 lines (top right corner)
  1. Clicked on gear icon (top right)
  2. Click area that says “Tap to set where home is on the map” and zoom in to correct location on map.

EDIT: Please note this version has simplified the user interface, so please CHECK and VERIFY your notification settings. These are now on the first page under door lock/unlock actions.


(www.rboyapps.com - Make your home your butler!) #16

###User Unlock/Lock Door Notifications and Actions - Version 2.4.2

  • Improved reliability of auto unlock and auto relock
  • Now the App checks if the device lock has the AutoLock feature enabled and if so it will not Unlock the door when open to avoid an infinite lock/unlock loop

Recommend the use of the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 2.10.1 or later for full SmartApp functionality

Thanks to DnCCrew for this step:

To set the hub Location, from smartphone app:

  1. Clicked on the 3 lines (top right corner)
  1. Clicked on gear icon (top right)
  2. Click area that says “Tap to set where home is on the map” and zoom in to correct location on map.

EDIT: Please note this version has simplified the user interface, so please CHECK and VERIFY your notification settings. These are now on the first page under door lock/unlock actions.


(www.rboyapps.com - Make your home your butler!) #17

###User Unlock/Lock Door Notifications and Actions - Version 2.4.3

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 2.10.3 or later for full SmartApp functionality

Thanks to DnCCrew for this step:

To set the hub Location, from smartphone app:

  1. Clicked on the 3 lines (top right corner)
  1. Clicked on gear icon (top right)
  2. Click area that says “Tap to set where home is on the map” and zoom in to correct location on map.

EDIT: Please note this version has simplified the user interface, so please CHECK and VERIFY your notification settings. These are now on the first page under door lock/unlock actions. Also NOTE that the user lock code based actions require the use of the Universal Enhanced Z-Wave Handler version 2.10.3 or later


(www.rboyapps.com - Make your home your butler!) #18

###User Unlock/Lock Door Notifications and Actions - Version 3.0.0

  • Fixed issue with Auto Relock and Auto Unlock not working for some users
  • Added support for RFID card reporting
  • To use the advanced features (RFID, Lock based actions, Tamper Alarms) you require the Universal Enhanced Z-Wave Lock device handler version 3.0.0. All the rest of the functionality will continue to work with the Stock ST Z-Wave Device Handler.

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.0 or later for full SmartApp functionality

EDIT: Please note this version has simplified the user interface, so please CHECK and VERIFY your notification settings. These are now on the first page under door lock/unlock actions. Also NOTE that the user lock code based actions require the use of the Universal Enhanced Z-Wave Handler version 3.0.0 or later


(www.rboyapps.com - Make your home your butler!) #19

###User Unlock/Lock Door Notifications and Actions - Version 3.1.0

  • Enhanced Auto ReLock to relock the door it hasn’t been opened for the configured time

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.0 or later for full SmartApp functionality


(www.rboyapps.com - Make your home your butler!) #20

###User Unlock/Lock Door Notifications and Actions - Version 3.1.1

  • Workaround for ST bug with contact address book for notifications

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.1 or later for full SmartApp functionality


(www.rboyapps.com - Make your home your butler!) #21

###User Unlock/Lock Door Notifications and Actions - Version 3.1.2

  • Fixed a bug which caused disable all push notifications to also disable text notifications

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.1 or later for full SmartApp functionality


(www.rboyapps.com - Make your home your butler!) #22

###User Unlock/Lock Door Notifications and Actions - Version 3.1.3

  • Added the ability to select operating modes for auto relock

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.1 or later for full SmartApp functionality


(www.rboyapps.com - Make your home your butler!) #23

###User Unlock/Lock Door Notifications and Actions - Version 3.1.4

  • Added functionality to check for configured auto re-locks and open door notifications on mode changes

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.1 or newer for full SmartApp functionality


(www.rboyapps.com - Make your home your butler!) #24

###User Unlock/Lock Door Notifications and Actions - Version 3.1.5

  • Minor bug fix, when controlling multiple doors and one or more doors doesn’t have an assigned sensor, when the mode changes the door may not relock itself if configured to do so

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.1 or newer for full SmartApp functionality


(www.rboyapps.com - Make your home your butler!) #25

###User Unlock/Lock Door Notifications and Actions - Version 3.1.6

  • Workaround for bug in ST app v2.2.0 causing unlock based actions page to break for iOS/Android users

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.1 or newer for full SmartApp functionality


(www.rboyapps.com - Make your home your butler!) #26

###User Unlock/Lock Door Notifications and Actions - Version 3.1.7

  • Patch for actions page not showing up if there are no routines on the hub

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.1 or newer for full SmartApp functionality


(www.rboyapps.com - Make your home your butler!) #27

###User Unlock/Lock Door Notifications and Actions - Version 3.1.8

  • Fix for unable to change notify option
  • Improved layout and explanations

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.1 or newer for full SmartApp functionality


(www.rboyapps.com - Make your home your butler!) #28

###User Unlock/Lock Door Notifications and Actions - Version 3.1.9

  • Patch for ST’s “ghost” routines causing some users to get an error while trying to configure actions

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock, Schlage Lock, Yale Lock, Kwikset Lock, IDLock, DanaLock, August Pro and Samsung Lock Device Handler with Alarm Control, Notification, RFID, Door Sensor and advanced features) device handler version 3.0.1 or newer for full SmartApp functionality


#29

Cant get notification to work, this is from the logs:

45fbc4a5-0f1c-4bfd-bd7f-fa66b830e00f 15.09.44 CEST: error java.lang.NullPointerException: Cannot get property ‘eaf3c861-343a-44e3-81a6-8e94cafd2442’ on null object @ line 714
45fbc4a5-0f1c-4bfd-bd7f-fa66b830e00f 15.09.44 CEST: info Running unlock Phrase I’m Back!
45fbc4a5-0f1c-4bfd-bd7f-fa66b830e00f 15.09.44 CEST: debug Found per user unlock actions
45fbc4a5-0f1c-4bfd-bd7f-fa66b830e00f 15.09.44 CEST: debug Lock Dør Hovedinngang Lås unlocked by Hovedbruker, notify true, notify modes null, via keypad
45fbc4a5-0f1c-4bfd-bd7f-fa66b830e00f 15.09.44 CEST: trace Event name lock, value unlocked, device Dør Hovedinngang Lås