[RELEASE] Universal Enhanced Z-Wave Lock Device Handler for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung

A “future proof” Universal Enhanced Z-Wave Lock device handler

This device handler is enhanced to fix bugs in the stock ST ZWave Lock Device Handler, include patches for bugs in lock firmwares and bring out additional features for Schalge, Yale, Kwikset, IDLock, Popp, Samsung, Delaney, August Pro, Danalock, KeyWe, Philia, Vivint, Locstar etc zwave locks (see below for a full list of models and features). This works with all ZWave locks and newer ZWave Plus locks (see below for a list of locks tested).

It discovers/learns the lock features and automatically configures them. If a feature is not supported by the lock it will not show up or say Unsupported.

You need a SmartApp like Lock User Management (LUM), Rental Lock Automater (RLA) or SmartLocks to program user codes, create actions for locking/unlocking/user codes and notify you.

For Schlage locks with built a in siren check out the Schlage connect alarm configuration app.




Classic App


Comparison of lock model features


Recommend reading these posts about limitations of specific lock models

Tested and verified and optimized on the following lock models:

  • Yale Z-Wave/Plus locks (Assa Abloy, YRD2xx, YRD4xx, YRL2xx, YRC2xx, YDM7116, B1L, T1L, Keyfree, Assure, Conexis, Touchscreen, Deadbolt, RealLiving, nexTouch) (DPS sensor)
  • Schlage Z-Wave/Plus locks (FE469, BE469, BE468, FE599, BE369)
  • Kwikset Z-Wave/Plus locks (8xx, 9xx, 888, 910, 912, 914, 916, 954/Obsidian)
  • Vivint Z-Wave locks
  • DanaLock Z-Wave/Plus locks (V2/V3)
  • August Pro Z-Wave/Plus locks (door sensor)
  • IDLock Z-Wave/Plus locks (101/150) (door sensor)
  • Samsung Z-Wave/Plus locks (SHP-xxx, SHS-xxx)
  • Delaney Z-Wave/Plus locks (ZWxxx)
  • Locstar Z-Wave/Plus locks
  • Monoprice Z-Wave locks
  • KeyWe Z-Wave/Plus locks (door sensor)
  • Philia Z-Wave/Plus locks (door sensor)
  • Popp Z-Wave/Plus keypad

Key features supported by DTH (depending on lock model)

  • Automatic discovery of lock features
  • Program user codes
  • Lock/Unlock
  • Privacy/Vacation/keypad control
  • Autolock
  • Audio/volume control
  • One touch/Lock n leave
  • Alarm mode
  • Alarm sensitivity
  • DPS/Door sense
  • Passage mode (semi-permanent unlock)
  • RFID/Bluetooth reporting
  • Fire/smoke alarm
  • Tamper/motion alerts
  • Emergency alerts (police/fire)
  • Battery life optimization
  • Configure lock settings (device preferences page)
  • Enhanced programming communication for a weak mesh
  • Handling of missing information while pairing locks
  • Patch for firmware defects lock firmware which causes a loss of user details in lock/unlock notifications
  • Fix for pairing of some lock models causing loss of notifications

Tap the refresh button in the Classic ST app to discover the locks capabilities and the supported tiles will show up.

NOTE: Only tiles for supported/discovered features will show up (it the tile is blank, it means the lock doesn’t support the feature/isn’t responding to the discovery request). It helps to add a buffering device/repeater within 20ft of your lock for best performance

You can find the installation/update instructions here.

List of available custom commands to use via CoRE/WebCoRE:

  • disableAutolock
  • enableAutolock
  • enableKeypad
  • disableKeypad
  • enableAudio
  • disableAudio
  • disableOneTouchLock
  • enableOneTouchLock
  • setAlarm (“off”, “alert”, “tamper”, “forced”)
  • setSensitivity (“lowest”, “low”, “medium”, “high”, “highest”)

If you’re looking to capture specific events (e.g. invalid codes) and create custom actions/rules in CoRE/WebCoRE refer to this post.
For configuring the mode/sensitivity of the built in Schlage siren/alarm see this topic.

Additional Z-Wave/Plus Lock Features (varies by model)

Schlage Locks

  1. Configure the Local Alarm Mode on the lock (Off/Alert/Tamper/Forced Entry) (FE469/BE469)
  2. Configure the sensitivity of the Alarm for each mode (from Highest to Lowest in 5 steps) (FE469/BE469)
  3. Change user pin code length for Schlage Connect (468/469 series)
  4. Report alarms as motion sensors (FE469/BE469/BE469ZP) (optional, requires enabling in code)
  5. Enable/disable AutoLock (FE469/BE469/BE468/BE468ZP/BE469ZP)
  6. Enable/disable Keypad (Vacation Mode)
  7. Enable/disable Lock n Leave (one touch locking)
  8. Enable/disable the keypad Beeper
  9. Report if the user entered invalid codes through the ‘invalidCode’ attribute (fixed by lock at one report for every 4 attempts)
  10. Workaround for lock firmware bug in the FE599 and BE369 where it does not report the relock event after a user unlocks using a code
  11. Patch for firmware defect in Schlage Connect, BE469/BE468/BE468ZP/BE469ZP which causes a loss of user details in lock/unlock notifications

Yale Locks

  1. Enable/disable AutoLock
  2. Enable/disable Keypad (Vacation/Privacy Mode)
  3. Enable/disable the Audio/Speech and adjust volume
  4. Enable/disable One Touch Locking (Lock n Leave)
  5. Report if the user entered too many invalid codes through the ‘invalidCode’ attribute for SmartApps to use (configurable via device settings in Classic app)
  6. Report bluetooth/RFID cards usage (if reported)
  7. Configuration options (device settings/preferences page)
    • Auto relock timeout
    • Wrong code reporting threshold
    • Select volume level
    • Set vacation/privacy/passage mode
    • Eco mode
    • Activating/Reporting Yale Door Position Sensor (DPS) (if installed/reported)
  8. Patch for firmware defect in Yale keyless which causes a loss of user details in lock/unlock notifications

Kwikset Locks

  • Electronic Control Locks (8xx series)
    1. Enable/disable auto lock
    2. Configure auto lock timeout
    3. Enable/disable audio
    4. Configuration options (device settings/preferences page)
      • Auto relock timeout
  • DIP Switch Locks (9xx series)
    1. Report auto lock state (programmed via the dip switch on the lock)
    2. Report auto buzzer (audio) state (programmed via the dip switch on the lock)

IDLock Locks

  1. Enable/disable away mode
  2. Enable/disable auto lock
  3. Enable/disable audio/beeping
  4. Report door open/close state
  5. Report RFID card usage
  6. Program users codes
  7. Configuration options (device settings/preferences page)
    • Volume level
    • Unopened relock
  8. Patch for firmware defect in IDLock 150 which causes a loss of user details in lock/unlock notifications

Danalock Locks

  1. Enable/disable audio/beeping
  2. Enable/disable auto lock
  3. Configuration options (device settings/preferences page)
    • Turn speed
    • Brake n go
    • Turn n go
    • Auto relock timeout
    • Bluetooth always allowed

Samsung Locks

  1. Enable/disable privacy mode (keypad lockout)

August Pro Locks

  1. Report door open/close state

Keywe Locks

  1. Report door open/close state

Philia Locks

  1. Report door open/close state

Popp Keypad

  1. Enable/disable audio/beeping

To enable compatibility with the Smart Locks Guest Access dashboard

Change the name of the device handler in metadata section from

name: “Universal Z-Wave Lock With Alarms”

to

name: “Z-Wave Lock”

Click Save -> Publish



Notes:

  1. August Pro locks with the Door Position Sensor (DPS) and Yale locks which support the optional DPS sensor/module report door status over Z-Wave, Yale-August locks firmware don’t report DPS over Z-Wave
  2. Some Yale L1 locks reports RFID usage over Z-Wave, RFID locks cannot be programmed over Z-Wave with this DTH
  3. August Pro locks do not allow remote programming over Z-Wave (only reporting usage)
  4. Monoprice locks do not report usage over Z-Wave (only programming)
  5. Schlage BE369 report user code locked events as unlocked due to a lock firmware bug
  6. Kwikset/Vivint locks should have anti theft disabled or should be excluded from the old controller before trying to pair with ST
  7. Schlage locks with built in siren/alarm cannot be triggered externally, they only report when the siren/alarm is activated over Z-Wave. The mode and sensitivity can be configured over Z-Wave using this app
  8. Some locks with limited button keypads have restrictions on user codes, see this post for more details

If you have any suggestions or requests please feel free to let us know

Check out these other SmartApps

[RELEASE] Door Chimes and Notifications for Doorbells and Sensors

[RELEASE] Security System: Intruder Alert with Actions

This device handler is available on the RBoy Apps Server

Refer to our facebook page http://www.facebook.com/RBoySTApps to get the latest news and updates.

The latest version is available on the RBoy Apps server

Copyright © RBoy Apps

21 Likes
[RELEASE] Schlage Connect Lock Alarm Mode and Sensitivity Change and Monitor (BE469)
(Enhanced) Z-Wave Schlage Touchscreen Lock
Schlage be469 lock: a new device was added, but was not the correct type. Continuing to search…"
Yale Keyfree - passage mode tweak?
Lock Polling killing battery
Zwave locks/nexia/smartthings
Keypad tones on Schlage lock?
[RELEASE] Lock User Management (LUM)
Kwikset 914 Zigbee or Zwave Z-wave?
Yale Z-Wave YRD240 Access Code Creation
Compatibility with Baldwin Zigbee or Z-Wave locks
Yale Z-wave Deadbolt $104; Push button lever lock $159 (YRL210-ZW-619) Amazon
Best Smart lock
Smart Lock
Schlage Connect - Which hub for my office?
YRD446 Assure Lock with Bluetooth & Z-Wave
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
Danalock v3 smart lock
Schlage connect on sale at home depot
Lockly Secure Pro Intergration
Need Help To Accomplish (Schlage/Ecobee/Presence)
Smartthing ZWave Schlage Touchscreen Deadbolt Door Lock IFFT Question
How can I automate: RFID, door lock, LCD and speaker?
Help getting my Schlage BE469 lock back to a working function
Activate a routine but if a window sensor is on then don’t turn on?
Smartthing ZWave Schlage Touchscreen Deadbolt Door Lock IFFT Question
[RELEASE] Lock Manager
Distinguish between Open door for come in or go out?
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
(Enhanced) Z-Wave Schlage Touchscreen Lock
Schlage Connect Not Working, is it the battery already?
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
Schlage Lock Worth it?
Danalock z-wave Danalock 125 BTZE
Thermostat differences: CT100, CT100+, CT101, GoControl
Schlage touch screen lock. Can't Zwave exclude from lock and reprogram
Schlage touch screen lock. Can't Zwave exclude from lock and reprogram
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
Yale Conexis Lock help
Schlage Connect Activity Log?
[RELEASE] Lock Manager
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
Schlage FE599 not updating properly
[RELEASE] Rental Lock Automater - Airbnb, VRBO, HomeAway, TripAdvisor, Booking, Expedia
How to activate existing doorbell sound on knock?
Changing Lock Codes Remotely?
Danalock v2 - good, bad, any hands-on? Or August?
Schlage keypad lock with lever (FE599) doesn't send lock status to ST when auto-locking
Notify Option for Schlage BE369NX Door Lock
Schlage Connect notification by user code
(Enhanced) Z-Wave Schlage Touchscreen Lock
(Enhanced) Z-Wave Schlage Touchscreen Lock
(Enhanced) Z-Wave Schlage Touchscreen Lock
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
Turn lights on Yale lock only when entering code (entering from outside)?
First steps with SmartThings: setting up Yale YRD256 smart lock
[RELEASE] Lock User Management (LUM)
Issue with Yale Real Living Door Lock Codes
Cannot pair Schlage Camelot touchscreen lock!
Smart Locks Home Solution? Did miss something?
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
Door locked Manually vs Keypad vs Automation as triggers in new app, please
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[OBSOLETE: [BETA MILESTONE 2] CoRE (Community's own Rules Engine)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
New to SmartThings, need some help
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Management (LUM)
Schlage 559 door lock
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Management (LUM)
Automatic poll (Schlage FE599NX) after unlocked with code?
FAQ: How do I add / delete user codes on my new Schlage Connect lock?
Get ready to make the switch!
YRD446 Assure Lock with Bluetooth & Z-Wave
New to Smart Things need help managing Schlage lock user codes
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
Updates to the SmartThings Platform
[RELEASE] Lock User Management (LUM)
[Depricated] Lock Code Manager
Door lock with door sensor
Synchronized Smart Door knob and Deadbolt?
Samsung smart doorlock
[RELEASE] Lock User Management (LUM)
[RELEASE] Rental Lock Automater - Airbnb, VRBO, HomeAway, TripAdvisor, Booking, Expedia
Schlage won't reset nor connect to ST
Synchronized Smart Door knob and Deadbolt?
Lock failed to complete the network security exchange
ZWave Popp Keypad Device Handler?
KeyWe Smart Lock
Kwikset 914 - lock status not update in ST app when lock button pressed
[RELEASE] Rental Lock Automater - Airbnb, VRBO, HomeAway, TripAdvisor, Booking, Expedia
ISY99i contention with SmartThings
Yale Assure Lock Control, Insteon, Hubitat, Smartthings
Danalock z wave option is not shown
Samsung smart doorlock
Gerda smart lock Gerdalock v3
Schlage Door Lock Battery Died Suddenly
[RELEASE] Lock Manager API - Control your locks and manage users remotely
Notifications kwikset 910
New Smartthings Hub can see Kwikset 910 door locks, but not control them
How to control Schlage locks in new ST app?
How to control Schlage locks in new ST app?
Yale Assure Lock Announcement
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock Manager API - Control your locks and manage users remotely
[Release] SHM Delay Version 2.0
Kwikset SmartCode 916
Smart locks for the knob, not the deadbolt?
[RELEASE] Lock User Management (LUM)
RBoy's Z-Wave Deadbolt Lock DTH Reviews
Change Auto-lock Time on Yale YRD-210
Smartthings app (from classic) migration / Schlage question
Lock Manager Text Notifications When Door Locks/Unlocks Not Working
August smart Lock app / functionality
Control Z-Wave deadbolt lock from Monoprice?
[RELEASE] Lock User Management (LUM)
Simple RFID Reader (WiFi, Z-Wave, Zigbee, etc) for SmartThings?
[RELEASE] Lock User Management (LUM)
Smart things unable to add codes to Kwikset zwave lock
[RELEASE] Lock User Management (LUM)
Smart Locks Offline/Checking Status, not working
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Management (LUM)
Connexis L1 wont add any tags or anything
Smart Lock Guest Access "No Locks Are Online. Try Again Later"
[RELEASE] Lock User Management (LUM)
Yale conexis L1 what do I need to show in app when and what fob tag or card is used
Problem with Setting up Z-Wave )MiLocks)
Danalock V3 EU + ST Hub 2 + New App = useless?
[RELEASE] Lock User Management (LUM)
Door Lock (manual lock/unlock) not triggering events (April 2019)
Schlage BE469 Custom autolock timeout
Yale YRL256-ZW2-619 Assure lock problem with Smartthings app
New app smart lock guest management? Where is it?
Schlage Z wave lock and “Smart Locks” app?
[RELEASE] Lock User Management (LUM)
Schlage Z wave lock and “Smart Locks” app?
Schlage connect ST classic app locking on its own every hour (June 2019)
How can we control alarm for Schlage connect?
Kwikset 916 only recognized as 910
New Schlage Connect wrong type/issues with Guest Access
Schlage locks - Deal of the day @ Home Depot (October 19, 2020)
Anyone able to add lock codes yet since the firmware update?
[RELEASE] Lock User Management (LUM)
Smart Lock to work with SmartThings?
Yale conexis L1 z wave module 2 security
Lock Manager Text Notifications When Door Locks/Unlocks Not Working
Take over Vivint Kwikset 910 locks with ST
Legacy Z-Wave Devices and Hub Firmware 28.11
Smart dead bolt lock recommendation
Schlage Touchscreen not working?
Strange Schlage Incident
Kwikset open outside not inside
POPP Keypad - almost working!
[RELEASE] Lock User Management (LUM)
Ring Protect Keypad
FAQ: My lock/device does not pair or appears to pair but it won't show up in the mobile app or IDE - stale DTH
Yale YRL226 - ZWave Module Setup?
KeyWe smart lock open/close status
How to control Schlage locks in new ST app?
Samsung smart doorlock
Kwikset 914 duplicate log and codes
Yale Conexis l1 Locking Issue
How to Disarm SHM via Keypad?
Lock Controls
Smart Lock Guest Access - Code 251
Schlage deadbolt and multisensor problem
Schalge lock feature missing: Code change, Guest access etc
Z-Wave Lock vs. Z-Wave Lock with Codes DTH
Devices we don't have
Get lock and unlock information from Yale Real Living Lock
Push Notifications for Schlage Lock Not Working (April 2019)
Schlage FE599NX lever wrong code timeout penalty or alert
Schlage FE599NX lever wrong code timeout penalty or alert
Door lock responds but doesn't report status
Kwikset 913 with a Z-Smart Plus is pairing but doesn’t work
Cannot add my Schlage Connect Lock to SmartThings Hub
Kwikset 916 Zigbee in 2020 using Rboy or other smartapps
No locks online try again later
FAQ: How to migrate from the Classic App to the new App
Smart Lock Guest Access "No Locks Are Online. Try Again Later"
How do I display the Door Sense status of an August lock?
Yale Conexis L1 Z-Wave on Smart Things
Recommendation for Smart Lock in Europe
Yale Keyless Connected showing Checking Status
Yale Smart Lock and automated disarming of security (Australia)
My Conexis L1 unlocked itself today whilst we were away from home
Kwikset 888 lock not pairing
Danalock. How to activate bluetooth
Setup Schlage Connect Keypad with SmartThings Hub v3
[RELEASE] Rental Lock Automater - Airbnb, VRBO, HomeAway, TripAdvisor, Booking, Expedia
New user to community
[RELEASE] Lock User Management (LUM)
Push Notifications for Schlage Lock Not Working (April 2019)
Best Smart Lock for New Home Construction
Schlage Door Lock features
[RELEASE] Rental Lock Automater - Airbnb, VRBO, HomeAway, TripAdvisor, Booking, Expedia
[RELEASE] Lock Manager API - Control your locks and manage users remotely
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
Yale Conexis L1 - “Not using high security”
FAQ: why would I need another beaming repeater if my zwave lock is already close to my hub?
Yale keyless connected lock to smartthings
Garage Door Monitor - cant get past "when the garage door is open"
FAQ: How to migrate from Wink to SmartThings
Smart Lock Guest Access Overview
Which door lock handle/deadbolts allow for remote CODE changing through Smart Things?
Schlage lock options Control: Why are they different in the two apps?
Schlage lock everything but adding codes
New to SmartThings - Advice/help needed!
Smart lock unlocks when door opened from inside
Yale Conexis l1 rfid tags
[RELEASE] Lock User Management (LUM)
SmartThings Keypad
[RELEASE] Enhanced ZigBee Keypad Device Handler - Centralite, UEI, IRIS, Xfinity, Scout
Schlage lock connects to ST hub as a light switch
Schlage Connect is connected but unsure how add different codes
A New user to everything concerning smart homes (Egypt)
Schlage Connect BE469 Zwave Plus ZWAVE_S0_DOWNGRADE
Google Home Yale Conexis l1 with Smartthings
Connect Bluetooth smartlock to ST? RFID keypad for arm/disarm SHM? (Denmark)
Schlage Connect keypad not working
Yale assure Z-Wave lock DH
Push Notifications for Schlage Lock Not Working (April 2019)
[RELEASE] Rental Lock Automater - Airbnb, VRBO, HomeAway, TripAdvisor, Booking, Expedia
[RELEASE] Rental Lock Automater - Airbnb, VRBO, HomeAway, TripAdvisor, Booking, Expedia
Yale conexis L1 with Z wave module 2
Help with Schlage Dead Bolt Notifications
Hub Firmware Release Notes - 0.31.4
[RELEASE] Lock User Management (LUM)
Switch Z-wave Yale Deadbolt from CPI Security to Smartthings?
Yale Z-Wave module 2 won't go in to learn mode
Door Lock events stopped working with custom code
Yale Z-Wave module 2 won't go in to learn mode
[RELEASE] Lock User Management (LUM)
Changing Lock Codes Remotely?
Can the August 3 door sensor be added as a separate thing in SmartThings
Schlage Nexia Lock Remote Administration
Yale lock fob identification
[RELEASE] Lock User Management (LUM)
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
Which Schlage Connect Lock Device Type Handler to use as a baseline?
Schalge Door Lock error java.lang.NullPointerException: Cannot invoke method unlock() on null object
Schlage Century wont connect to Smartthings Hub
Schlage Camelot BE469WK vs. BE469NX ? confused
Yale Connexis L1 Battery change
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Management (LUM)
Recommendations for Smart Lock
Kwikset 888 lock not pairing
Help with YRD240 Yale Keyfree Touchscreen Deadbolt Auto Lock Feature
Gonna ditch all my Schlage-related automations
Best Smart Lock - My Scenarios
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
Advice on Smart Lock vs RFID?
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
Lock Code for Arming System?
[RELEASE] Lock Manager
[RELEASE] Lock User Unlock/Lock Door Notifications and Actions
Smartthing ZWave Schlage Touchscreen Deadbolt Door Lock IFFT Question
Unable to use door lock as a trigger for Routines
Need new smart lock, got any leads?
Arrival Sensor plus code on smartlock
Schlage FE599--some questions
Help When Schlage Connect Deadbolt Alarm is Triggered
Smart Locks can't create any new codes
Shlage FE599NX program remotely

You said the logs don’t have a alarm event? If there isn’t an alarm event sent from the lock there isn’t anything you can do.

I guess you could build something to listen for the alarm and then trigger something but that’s a lot of pain.

I get a “event” but would like to see an alarm notification (there is no notification from the app right now, just an event being logged), Any idea how to do that

Thats where i come in :smile:

Can you past the line for the event in the thread. Should be able to write some code for you.

Will get back to you, trying a few things and will post all codes. I’m seeing random codes also coming from the lock.

I’ll be waiting :smile:

I have this lock as well and would be happy to help if needed.

Awww man… Not you again :wink:

JK. We’re gonna be good friends Greg!

haha. well I was following this thread anyway to use whatever code came out of it. So I figured I’d speak up.

Just registering my interest in this as well, I have the same locks and would love to use it for more functionality. Happy to test and assist you guys.

Awesome! I don’t have one so i can’t look at logs. I just need to event it sends on alarm on and alarm off and should be able to action off that event.

I’ll test it when I’m back home tomorrow night if no one else has. I haven’t used the alarm yet so I don’t know how to set it off but I still have the manual.

1 Like

Enter the wrong code 4 times, if it’s set to tamper or forced entry it’ll go off (loud as heck!) keep the schlage button on the indoor side pressed to turn it off

That’ wierd I’m no longer seeing the code. Earlier I used to get codes like Code 1 and or Code 11 or Code 16 but I’m not seeing it
@zj4x4 see if you can get any codes from your system. I’ve been playing with mine so maybe I accidentally turned something off.

Okay here is what I’m seeing looking at the log history when I setup the lock initially here are the unknown codes:

The format is “Message” - “Value” as reported in the logs

Front Door was unlocked with code 4 - unlocked
Front Door code 0 is not set - 0
Front Door code 1 changed - 1
Front Door was unlocked with code 1 - unlocked
Front Door is jammed - unknown
Front Door code 5 is not set - 5
Front Door code 9 is not set - 9
Front Door code 11 is not set - 11
Front Door code 16 is not set - 16
Front Door code 22 is not set - 22

The last set of codes was when I was playing with the alarm. The jammed is a very cool thing if it can made to show up as an alarm that the door is jammed and not closed properly. The 0,1 and unknowns I don’t know why they popped up.

Does this help @tslagle13

1 Like

These are from the Event logs or the live logging in the IDE?

What I need is the event logs from the device queue. So go to the IDE>My Devices>Select your lock form the list>ListEvents>get me each event line for the alarm and jam events. SHould look like this…

The most important info here is the “Name” and “Value” fields.

A screenshot of this area would be ideal.

@tslagle13 here you go:

Date Source Type Name Value Displayed Text
2014-10-26 4:38:18.516 PM EDT
4 days ago DEVICE codeReport 22 Front Door code 22 is not set
2014-10-26 3:34:01.165 PM EDT
4 days ago DEVICE codeReport 16 Front Door code 16 is not set
2014-10-26 3:34:01.104 PM EDT
4 days ago DEVICE codeReport 16 Front Door code 16 is not set
2014-10-26 2:37:52.097 PM EDT
4 days ago DEVICE codeReport 11 Front Door code 11 is not set
2014-10-26 2:14:36.755 PM EDT
4 days ago DEVICE codeReport 9 Front Door code 9 is not set
2014-10-26 1:36:07.003 PM EDT
4 days ago DEVICE codeReport 5 Front Door code 5 is not set
2014-10-26 1:36:06.992 PM EDT
4 days ago DEVICE codeReport 5 Front Door code 5 is not set
2014-10-26 12:10:39.260 PM EDT
4 days ago DEVICE codeChanged 1 Front Door code 1 changed
2014-10-26 12:09:28.378 PM EDT
I4 days ago DEVICE codeReport 0 Front Door code 0 is not set
2014-10-26 11:55:02.215 AM EDT
4 days ago DEVICE lock unlocked Front Door was unlocked with code 4
2014-10-26 11:54:26.299 AM EDT
4 days ago DEVICE lock unknown Front Door is jammed

So summarize:

  1. Can ST notify the user with a pop up when the alarm goes off (I can’t seem to replicate getting a code from the lock anymore, so I guess this won’t work)
  2. Can ST use the alarm in the lock as an alarm device (turn on / off)?
  3. Can ST notify the user with a pop up when the door is jammed?

Thanks

I need to look at this when i get home. IM affraid we won’t be able to read the alert. Looks like it doesn’t know what the event name is… but i may be able to hack something.

Does this include and event for the alarm? I don’t think i see it here.

Tim I don’t think there are events for the alarm function

That’s right I don’t see the alarm event here anymore. But I see the door jammed event which would be cool to have notified if the door jammed and didn’t close.

Also I’m guessing there’s no way to use the alarm built into the lock right?