MyEcobee device which is the DTH for interfacing with ecobee (at my store,look for the standalone version)
A zoning app to control the vents
There are 2 choices of zoning smartapps:
a) If you want to control your thermostat’s setpoints based on the avg temp calculation of multiple temp sensors, then ecobeeSetZoneWithSchedule is the best app for you (at my store). However, you won’t be able to set a temp threshold for each room. Instead, it allows you to set a temp delta based on the thermostat’s setpoints to control the vents in each zone (a zone is composed of 1 to many rooms).
b) If you don’t really need the avg temp calculation between all your temp sensors, then the ScheduleRoomTempControl smartapp (at my store) can control the vents based on a (static/dynamic) temp threshold only.
Based on your requirements above, it looks like the ecobeeSetZoneWithSchedule is the best app for you (as it meets most of your requirements). Both smartapps above can take into account each room’s occupancy to control your setpoints/vents, so that the occupied rooms would receive most of the airflow.
In all cases, you’d need the DTH first (MyEcobee device).
For more details on my zoned heating/cooling solutions, refer to
I have been using Ecobee (connect) and overall was pretty happy with it, but recently installed and configured Ask Alexa, and wanted to take advantage of some of the options of this app. Then of course I see that it’s pay, which I have no problems with. Just curious about a few basic bits of info.
Does paying for the app include free upgrades to new version? Or does that require paying for support?
How often are updates released?
Other then integration with Ask Alexa (which is a nice one), what features will this give me over Ecobee (Connect).
Screen shots look nice, and it looks like a lot of effort has been put into this, so I’ll be happy to support this kind of development.
Thanks
Thanks, I looked at what you sent. Seems a bit more than what I want. Also looked like you said I could accidentally run up a bill if not very careful.
I am using this to capture events.
Was just pondering a way to toss in the cycle time of my heating system to the mix. It seems it is beyond my current capability since I can’t code and I haven’t found a smart app to use to just subscribe to the thermostatOperatingState and put out a switch or contact that would follow it so grab basic on / off events.
I can just use the data provided by Ecobee (on their website) wasn’t that important. Things / ideas just pop into my head sometimes and I like to try and figure out how to do it.
Thanks for the initial answer and the follow up.
I DO appreciate everything you guys do to make things for us (that can’t code) work better, and the advice and directions when we need help this the simple/ obvious stuff.
Gotta say this is pretty awesome. I love all the options in smart apps that come with it and the focus on detail. By far best device handler and smart apps for any product I have.
Great app, worth the investment/donation. Would love to see a somewhat more structured user manual so as to get the most out of all the features. Thanks for your awesome work.
I’ve been using an earlier version (3.9) for quite awhile now and loved it. Unfortunately, I never got around to updating it the version 4…or now version 5. I’ve also got some Keen vents now, so really looking forward to upgrading to the latest version and getting on one of your SmartApps to automate the vents/rooms/ecobee! Oh…and Ask Alexa too!
Got my ecobee3 today and can’t wait to run it with your code. I’ll let everyone on this post know how it goes. Working with 3 Iris Sensors, 1 ecobee3 sensor, 2 keen vents and the ecobee3. Wiring in my house is from the 60s w/ No c-wire so wish me luck.
Following the ST mobile v2.3.0 release, I sent out a new version (v5.8.5) to all my active contributors in order to correct some minor ST rendering issues (between the iOS and Android versions, some compromises have to be made sometimes)…
Installed My Ecobee V5 DH and the smartapp for my 2 ecobee thermostats. Now I notice I have 4 thermostats showing - the 2 originally discovered by Smartthings on installation, and the 2 in My Ecobee:
Master Suite
Main Floor
My Ecobee Master Suite
My Ecobee Main Floor.
I have a few questions.
Can I simply delete the original thermostats in the IDE? They show as “OFFLINE” anyway. Or are they required for connection to the Ecobee server?
Can I then rename the My Ecobee thermostats to shorter names like “Master Suite”? This would be easier with Ask Alexa.
I will be adding a 3rd thermostat when it arrives. What would be a good way to integrate it to avoid the duplication? Or should I just add it as normal and then delete when I add it to My Ecobee?