SmartThings Community

[RELEASE] Lock User Management: Door lock code manager (create, delete and schedule codes) with automatic lock/unlock, custom user actions and SHM/ADT integration

smartapp_security
smartapp_locks
project_locks
project_secondhome
rboyapps

(ilker Aktuna) #1595

I have installed the DH and the Smart app for my Danalock V3 (US Zwave model)
I have 2 questions:

  1. I only see “lock”, “unlock” and “autolock” buttons and the battery information on the lock UI on ST. Why can’T I see other buttons like keypad etc. ?
  2. I didn’t undertstand how to use user codes. I created a user with a code on the smart app. Now how shall I unlock the door with that code ?

here’s screenshot from my lock UI on ST :


#1596

I posted a little tip/trick in the other thread for you.

Open the device in Things and scroll all the way to the bottom and hit Refresh several times.

This should magically make the other features appear.


(ilker Aktuna) #1597

trief that with no change.


#1598

Hehe. Stay in the other thread. I posted again.


(Mark) #1600

@Tony_Orr
What issue Tony? Your post is not linked to anything?


(Greg Ottira) #1601

Been a while using this app and just did all the updates and it’s been working flawless. One problem were having is when my son leaves the house he’s forgetting to close the back slider, is there a way to prevent the front door from locking if the other door sensors are open? This way if he can’t lock the front door it will remind him to go close the other doors.


(Mark) #1603

Ah ok, thanks!

That would be a nice addition :slight_smile:


(www.rboyapps.com - Make your home your butler!) #1604

It’s finally here, use your keypad as a lock and with Lock Coder User Management.

You can arm/disarm SHM directly from the keypads and also program 4 digit 4 user codes directly into the keypad using the SmartApp.

Make sure you update to version 07.05.00 of the SmartApp to use these additional SHM features (older version of the SmartApp will also work with the keypad without the extra SHM features).


(www.rboyapps.com - Make your home your butler!) #1605

And happy to finally bring you Rental Lock Automater: Automatically manage your AirBnB, VRBO and HomeAway rental property locks and users

A big thank to all our supporters for months of feedback


#1606

Big Thumbs up to RBoys team. Ive been a Beta use for a couple of months and this is a great tool for Airbnb Hosts.

Takes all the stress out of lock code changes and has lots of notification options. If you are in to Airbnb hosting, take a look.


(Tony Orr) #1607

I have the same issue (and yes, I’ve tried refreshing). I only see Lock/Unlock/Audio and Battery Level tiles on my Conexis L1. I want to disable Autolock but none of the advanced features display.


(Tony Orr) #1608

I replied directly to the thread in question and it’s appeared here again so…

Still no answer. As far as I’m concerned, this DH does not support advanced Conexis L1 features. A bit frustrating as this is the only reason I purchased it.


(Mark) #1609

I have not fitted my modules yet but do we even know if these features are supposed via the Z-Wave module. After all it is an addon and may not have the ability to change the actual Locks settings etc. but hopefully it does and we may get a reply soon!
Hope to crack on with setting mine up this coming weekend.


(John Crighton) #1610

I have a Conexis L1, and this DH gives me an autolock toggle tile.


(www.rboyapps.com - Make your home your butler!) #1611

@Tony_Orr you were asking about the Enhanced Z-Wave Lock DTH thread:


(Ian) #1612

Hi @RBoy - I have it set up so that SHM goes to “Away” when I use a specific code. However the SHM state is changed to “Armed (Stay)” when I execute. I doubled checked the scenes that are set up correctly. I have it set up correctly in your app. Any ideas?


(www.rboyapps.com - Make your home your butler!) #1613

Make sure you’re on the latest version, sounds like you may be on an older version. If you’re using a “keypad” you need to be on 07.05.00 or newer to use the direct keypad arm/disarm feature.


(Ian) #1614

I’m on version 7.04.06. Sorry by keypad I mean the pad on my Schlage connect.


(Lewiszhou) #1615

Hello Sir
I bought a life time subscription and I’d explore the aaps that you developed.
Question here, for Schlage Smartlock (which is currently managed by ST stock z-wave controller), do I have to reset/clear all the entry code before using your advanced smartapp?
I tried to install the app but when I select the user “configure users” section none of the existing user code actually show up (everything listed as blank),

Thank you

Lewis


(Head of Support (rboyapps.com)) #1616

Hi Lewis,

Resetting the lock is optional, however we do recommend running the Clear Codes procedure listed on it website after installing the app for the first time.

For security reasons locks do not report existing codes so after a new install it will always start with a “clean” slate. Which is also why we recommend running the clear codes procedure (after installing the app) and resetting the lock (before installing the app) so that you know that no “old” are left accidentally.