[OBSOLETE] Button Controller Plus, HS-WD100+ HS-WS100+

[Darwin]

I’ve updated the WD100+ device handler to support the latest firmware ramp rate configuration capabilities and also added a preference option to have double-tap up turn on the light to full brightness. Details are in the HomeSeer HS-WD100+ thread

@dalec

Great! So does this mean if we don’t have v5.14 we need to update to that version on the hardware for your future update to work right?

The local ramp rate configuration should now work since that was supported in the old version, but the remote ramp rate will not. I ended up removing the previous workaround for this to reduce the DH complexity for maintainability. The old device handler code is still available if you want remote dim rate control on the old firmware, but I could probably have my arm twisted to add that back to the current code if it causes anyone major grief.

[OBSOLETE] HomeSeer HS-WD100+ and more (Simple DTH in post 27, advanced feature DTH in post 32)

I’ve updated the WD100+ Device Handler to provide a preference option for double-tap to turn on the light to full brightness. Great suggestion @DennisY. This was a simple change to the device handler and I really like the feature - and that a smart app is not required for this. I also added preference settings to modify the switch configuration for ramp rates for local and remote actions. For the remote ramp rate configuration, your switch firmware will need to be at least at V5.14. Setting a dim level per duration of 99 will provide a close to instantaneous ramp-up. I ended up removing the previous workaround to control the remote dim rate in the device handler since it can now be controlled via device config with the new firmware. Unfortunately, this means for those still on older <5…