Just to let my contributors know and all ST users who would like to do targeted heating/cooling in their home that I have new versions of my zoned Heating/Cooling smartapps available at my store :
I made some changes to ecobeeSetZoneWithSchedule (v8.7.9):
Optimized reverting temp adjustment operations (based on outdoor temp thresholds) to avoid unecessary hold commands sent to thermostat
P.S. For all ST users who have contributed to my support packages, the update has been done for you under your ST account (provided that I have your credentials), you don’t need to do anything: everything has been taken care of.
You can download the new version at my store using the original sellfy link.
Just to let my contributors know and all ST users who would like to do targeted heating/cooling in their home that I have new versions of my zoned Heating/Cooling smartapps available at my store :
I made the following optimization to ecobeeSetZoneWithSchedule (v8.8), ScheduleTstatZones,(v8.8), and ScheduleRoomTempControl (v4.6) :
Optimized setVentSwitchLevel() to avoid sending multiple setLevel command to the vents if their current level is already within range of the target level in order to reduce noise.
P.S. For all ST users who have contributed to my support packages, the update has been done for you under your ST account (provided that I have your credentials), you don’t need to do anything: everything has been taken care of.
You can download the new version at my store using the original sellfy link.
I have just done a quick read of the vent management. I already have your My Ecobee device handler. All I want is the vents to follow the Ecobee schedule. When an Ecobee sensor is active, the vent regulates the room temperature. If the sensor is inactive, it closes. When the thermostat is in recovery mode, the appropriate vents are opened. Basically I just want to control everything from the thermostat.
Just to let my contributors know and all ST users who would like to do targeted heating/cooling in their home that I have new version of my zoned Heating/Cooling smartapp available at my store :
I made the following optimization to *ecobeeSetZoneWithSchedule (v8.8.1):
Made minor correction to adjust_tstat_for_more_less_heat_cool() to take into account the right baselines for adjustment*.
P.S. For all ST users who have contributed to my support packages, the update has been done for you under your ST account (provided that I have your credentials), you don’t need to do anything: everything has been taken care of.
You can download the new version at my store using the original sellfy link.
Just to let my contributors know and all ST users who would like to do targeted heating/cooling in their home that I have new version of my zoned Heating/Cooling smartapp available at my store :
I corrected the following minor issues in ecobeeSetZoneWithSchedule (v8.8.2), ScheduleTstatZones (v8.8.1) and ScheduleRoomTempControl (v4.6.1):
Made some changes to the icons path following some security changes in iOS/Android ST classic mobile app*.
P.S. For all ST users who have contributed to my support packages, the update has been done for you under your ST account (provided that I have your credentials), you don’t need to do anything: everything has been taken care of.
You can download the new version at my store using the original sellfy link.
Just to let my contributors know and all ST users who would like to do targeted heating/cooling in their home that I have new version of my zoned Heating/Cooling smartapp available at my store :
I corrected the following minor issues in ecobeeSetZoneWithSchedule (v8.8.5), ScheduleTstatZones (v8.8.4) and ScheduleRoomTempControl (v4.6.3):
Made further changes to the icons path in MyVirtualZone v1.2.1 to display them in the latest version of ST classic mobile app (v1.18 and higher).
Corrected set_fan_mode() in ecobeeSetZoneWithSchedule & ScheduleTstatZones to override fan settings when a condition such as the temp differential in the zone is over a temp delta threshold (ex. 4F) and also when no conditions are applied for the schedule
P.S. For all ST users who have contributed to my support packages, the update has been done for you under your ST account (provided that I have your credentials), you don’t need to do anything: everything has been taken care of.
You can download the new version at my store using the original sellfy link.
I am just getting starting to investigate what I need for adding smart vents to my HVAC system. I have been leaning toward flair since they are less expensive. What do these smartapps do that the flair app does not do?
Hi, please refer to the 1st post of this thread which explains all the features with links to the ST community wiki…
The Flair app can only use the Flair puck or the ecobee remote sensors to control the vents.
With my smartapps, you can leverage any ST connected temp/motion/contact sensors to control the vents…
On top of it, if you have the ecobee tstat, there is a tight integration with My ecobee device which allows you to adjust the setpoints & fan settings based on different indoor/outdoor conditions.
No other ecobee integration exposes so many features under SmartThings. And, you can use My virtual zone devices to control the vents & zones and get information about your zones in near real time.
Just to let my contributors know and all ST users who would like to do targeted heating/cooling in their home that I have new version of my zoned Heating/Cooling smartapp available at my store :
I corrected the following minor issues in ecobeeSetZoneWithSchedule (v8.8.8), & ScheduleTstatZones (v8.8.7) :
Made some changes to better control the Flair vents when Switch value=off
Removed some logic related to room tstats to avoid conflict with the Virtual Zone’s setpoints
P.S. For all ST users who have contributed to my support packages, the update has been done for you under your ST account (provided that I have your credentials), you don’t need to do anything: everything has been taken care of.
You can download the new version at my store using the original sellfy link.
Just to let my contributors know and all ST users who would like to do targeted heating/cooling in their home that I have new version of my zoned Heating/Cooling smartapp available at my store :
I corrected the following minor issues in ecobeeSetZoneWithSchedule (v8.8.9), & ScheduleTstatZones (v8.8.9) :
Made some changes in setRoomTstatSettings & turn_off_room_tstats_outside_zones() to avoid any conflicts when the master tstat is also included in the rooms (as a slave thermostat) for the scheduled zones.
P.S. For all ST users who have contributed to my support packages, the update has been done for you under your ST account (provided that I have your credentials), you don’t need to do anything: everything has been taken care of.
You can download the new version at my store using the original sellfy link.
Just to let my contributors know and all ST users who would like to do targeted heating/cooling in their home that I have some new versions of my zoned Heating/Cooling smartapp available at my store :
I corrected the following minor issues in ecobeeSetZoneWithSchedule (v8.8.9b), ScheduleTstatZones (v8.8.9b), ScheduleRoomTempControl (v4.6.6a) :*
Made some changes to better support the Flair vents
Made some minor icon changes in MyVirtualZone device (see pictures below).
As a reminder, my zoning solutions are fully compatible with MyEcobee Device and MyNextTstatV2 (for the Nest tstat). The Device Type Handlers (DTH) are also available at my store.
I bought a few Keen vents during the Memorial Day sale and I wanted to say THANKS for your work on these device handlers and apps! I’ve got the vents tied to my Ecobee thermostat and sensors and they’ve been doing a great job keeping the room temperatures balanced.
I just received some Keen Smart Vents and I already have an Ecobee3 with some smart sensors setup. ST sees the Ecobee and Smart Sensors. I can even install a Keen vent natively, but there appears to be little I can do with it, aside set the vents manually.
Would I be using EcobeeSetZoneWithSchedule? or ScheduleRoomTempControl? The first mentions ‘with some optional smart vents’…
I’d be looking to set a temperature in each room and have the system open / close vents as needed.
Just want to inform my contributors that new major versions of ecobeeSetZoneWithSchedule(v9.0), ScheduleTstatZones (v9.0) & ScheduleRoomTempControl (v5.0) * can be downloaded at my e-commerce solution provider (sellfy) using the original download link.
If you’re a contributor and interested in the new major version (v3), let me know and I can directly send the code to you for beta testing the upgrade. All you need to do is to copy &paste the new code over the existing one for MyVirtualZone DTH (Device Handler Type) and the zonign smartapp.
You’d probably need to refresh the Samsung connect app’s cache in order to see the UI changes. There are some instructions to do so in the release notes.
The new UI presentation amongst others adds a custom capability (setZoneSetpoint see image below).
Just want to inform my contributors that new version of MyVirtualZone(v2.2) can be downloaded at my e-commerce solution provider (sellfy) using the original download link.*
The new version exposes the heatingSetpoint & coolingSetpoint capabilities based on my custom setThermostatSetpoint capability for easier integration with dashboard such as SharpTools & ActionTiles.
All you need to do is to copy &paste the new code over the existing one for MyVirtualZone DTH (Device Handler Type), and the corresponding zoning smartapp and save/publish.
You’d probably need to refresh the Samsung connect app’s cache in order to see the UI changes. There are some instructions to do so in the release notes.
The new UI presentation amongst others adds a custom capability (setZoneSetpoint see image below).