Power restored monitoring. Am I overcomplicating this?

[JDRoberts]

Oh, I see. Can you use the Aeotec HEM then? It’s a Z wave device that reports directly to smartthings.

https://www.amazon.com/Aeotec-Aeon-Labs-ZW095-ZW095/dp/B00XD8WZX6

[OBSOLETE] Aeotec Home Energy Meter Gen 5 composite DTH

This DTH is designed to work with 3, 2 and 1 clamp configurations but was only tested on 3 clamp configuration so any input is welcome. This is a composite device. That means it will install a virtual device for every clamp (except for 1 clamp configuration) and a main device displaying information for the whole HEM. It requires “Aeotec HEM Gen5 Child Device” to work correctly so install both parts of the DTH before switching to it. This DTH provides the following functionality: Power Monitoring Energy Monitoring Voltage Monitoring Current Monitoring Configuration for following parameters: Power and Energy detection mode Reporting Threshold HEM threshold Clamp 1 threshold Clamp 2 threshold Clamp 3 threshold HEM percentage Clamp 1 percentage Clamp 2 percentage Clamp 3 percentage CRC-16…

BTW, it’s on the official compatibility list, so you don’t have to use the custom DTH, it just gives you more features.

https://www.smartthings.com/products/aeotec-home-energy-meter-gen5-2p-200a