Sadly the fingerprint must not match the only driver that matches is a zwave switch and it does not work.
I picked up this device. I have an aeotec v3 hub, and I would like to adjust some of the settings on the device. My understanding is that in order to do so with the aeotec hub, I’d need ST Edge drivers that support it.
Is anyone aware of any compatible drivers?
Device link: https://ring.com/products/alarm-motion-detector-v2
Has anyone been able to pair Aeotec HEM gen 2 to Smartthings hub?? I have just bought one and unable to pair it. Is there edge drivers for this? I have already installed gen 5 driver but still not able to pair this devive.
Does anyone have or know of a Channel with and edge driver for a Monoprice Z-Wave door/ window contact sensor model 24259
Try Z-Wave Sensor PH
Thank you, I’ll give that driver a try
A post was split to a new topic: Icon selection for edge driver?
ive tried this and it continually falls offline. Are you seeing something different?
Hi @cguidashome , wondering if you happened to find an alternate edge driver for these monoprice tilt sensors? Mine were auto-migrated sometime in the last couple of days, and no longer work (in my case they seem stuck “open”.
Try Z-Wave Sensor PH. Link to it is 3 posts above yours.
Gave it a try, unfortunately no joy for this tilt sensor… still stuck open.
Sorry that didn’t work. It seems to be a problem device.
3 posts were merged into an existing topic: [ST EDGE] Z-Wave Sensor Driver Channel - including specific Ecolink, FortrezZ, HomeSeer and Zooz models
ISO Edge Driver for Z-Wave Plus Eaton RFTR9605-TAW Duplex Receptacle. I need to enable the default startup of the device to be powered on. This is I believe a parameter that needs to be set to enable the default state of powered on. The default SmartThings edge driver for Z-Wave switch does not have this option enabled. Parameter list…
I was able to set the parameter for the Power up state with the Z-Wave Device Config Mc, Thank you JDRoberts. The default driver is Z-Wave switch. Is there a Edge Driver option that would enable power meter info and switch the outlet?
This device doesn’t have power monitoring.
I have one of these and will be doing a full custom driver for it soon. Likely will add it to Phil’s consolidated Zwave Switch driver.
+1 to the Nodon Octan, I found this channel supporting other Nodon remotes but not the Octan
Were you able to get the Aeotec Doorbell 5 working?
To any Lua coders: I am willing to send a reasonable PayPal payment for converting/writing two drivers. DM me if you are interested in receiving payment for converting and/or writing lua code for these two devices:
GE/Jasco Enbrighten Z-Wave Plus Plug-In Dual, Independently-controlled, Outlet Smart Switch with USB Charging, model 28177
Z-Wave Alliance product information: https://products.z-wavealliance.org/products/2192
More info on GitHub: https://github.com/openhab/org.openhab.binding.zwave/blob/main/doc/ge/28177_0_0.md
Zooz Z-Wave Plus S2 MultiSiren, model ZSE19
Multisiren manual: https://www.getzooz.com/downloads/zooz-z-wave-plus-s2-multisiren-zse19-manual.pdf
ZSE19 Groovy code: https://github.com/krlaframboise/SmartThings/blob/master/devicetypes/krlaframboise/zooz-s2-multisiren.src/zooz-s2-multisiren.groovy