Post Requests for Zwave Edge Drivers Here (community-created)

[Alwas]

@RafaelAntonio2022 you keep asking Mariano to add these Tuya devices and I think he’s explained why they don’t work with Mc drivers. Someone else is doing Tuya devices, please search the community.

[Alwas]

@RafaelAntonio2022 Sure, if you put “tuya soil sensor” into the search feature of the ST community forum, it will give you 6 results, the first result has the Edge driver. My advice first before buying a sensor, especially from China, is to search user reports of the sensor in question, unless it’s a new sensor and you want to experiment. I bought 2 of these soil sensors, I can tell you they are not accurate or reliable, and they spam your Zigbee network by sending reports every 5/10 seconds. I am not using them.

[philh30]

@mooch91

I’d love for this to be directly recognized as a smoke detector instead of a contact sensor

@mooch91

I’ve also got the Ecolink contact sensors utilized as leak detectors

[ST Edge] Z-Wave Masquerade

This driver allows simple z-wave devices, such as switches and binary sensors, to act as a different type of device. A typical use would be to make a z-wave contact sensor appear in the SmartThings app as a smoke detector. Profiles are included for: Acceleration sensors Alarms Carbon monoxide detectors Contact sensors Leak sensors Locks Motion sensors Presence Smoke detectors Switches Tamper alerts Temperature alarms Water level sensor (custom capability with low/normal/high states) Water valves Window shades Use the settings menu to swap between profiles (you may need to close and reopen the app to see the new profile). A setting is also available to invert the reported status. To use, enroll using the Channel Invitation and install the driver (choose the latest version if multiple a…

[Sakari]

I think they are included in the stock driver.

[uncledaveghr (Uncledave)]

Hi
I have got another Qubino relay, any chance you can add this fingerprint to

Z-Wave Switch Mc

when you get a minute.
Thanks

[mooch91]

@philh30

@mooch91

I’d love for this to be directly recognized as a smoke detector instead of a contact sensor

@mooch91

I’ve also got the Ecolink contact sensors utilized as leak detectors

[ST Edge] Z-Wave Masquerade

I will give this a look, thanks!

[Mariano_Colmenarejo]

@uncledaveghr

I have got another Qubino relay, any chance you can add this fingerprint to

Hi @uncledaveghr

This device is in stock smartthings driver.
It will be migrated automatically, if you wants install now is in my zigbee switch Mc and stock beta zigbee switch drivers

#   - id: 0159/0002/0051
#     deviceLabel: Qubino Switch
#     manufacturerId: 0x0159
#     productType: 0x0002
#     productId: 0x0051
#     deviceProfileName: qubino-flush2-relay