# Post Requests for Zwave Edge Drivers Here (community-created) **URL:** \ **Category:** Community Created Drivers\ **Tags:** edge-device, aftergroovy\ **Created:** [January 5, 2022, 3:30pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327 "2022-01-05T15:30:01Z")\ **Posts on this page:** 20\ **Page:** 41
**Author:** ![Mariano\_Colmenarejo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mariano_colmenarejo/32/220132_2.png) [@Mariano\_Colmenarejo](https://community.smartthings.com/u/Mariano_Colmenarejo)\ **Post date:** [December 28, 2023, 6:48pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2620 "2023-12-28T18:48:02Z")
> [@Plasma](#): > > Manufacture: 0086-0002-002D > Type: ZWAVE > Model: 0002-002D Added to this driver version If it doesn’t work, tell me. It does not publish the supported command classes and I added it as default ```auto ──────────────────────────────────────────────────── Name Z-Wave Sensor and Child Thermostat Mc Version 2023-12-28T18:44:58.776290138 ──────────────────────────────────────────────────── - id: 0086/0002/002D deviceLabel: Water Leak Sensor manufacturerId: 0x0086 productType: 0x0002 productId: 0x002D deviceProfileName: water-battery-tamper ``` ---
**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\ **Post date:** [December 28, 2023, 8:20pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2621 "2023-12-28T20:20:33Z")
> [@Mariano\_Colmenarejo](#): > > If it doesn’t work, tell me. It does not publish the supported command classes and I added it as default Pretty sure that’s a very old device which is a rebrand of the Aeotec DSB045. The reason you aren’t getting any command class report is because it literally only supports the “basic” commandset. It’s an even older generation than this one, but essentially the same. [https://products.z-wavealliance.org/products/1001?selectedFrequencyId=2](https://products.z-wavealliance.org/products/1001?selectedFrequencyId=2) Here’s a discussion from another forum > **[Foxx Project Water Sensor - Indigo Domotics](https://forums.indigodomo.com/viewtopic.php?t=21757&p=171036)** ---
**Author:** ![TheGrizzlyWizard](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@TheGrizzlyWizard](https://community.smartthings.com/u/TheGrizzlyWizard)\ **Post date:** [January 4, 2024, 5:18pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2622 "2024-01-04T17:18:45Z")
Does anyone have an edge driver for Z-wave repeaters (specifically the Aeotec Extender 7) that show signal metrics? ---
**Author:** ![jarjar](https://avatars.discourse-cdn.com/v4/letter/j/e19b73/32.png) [@jarjar](https://community.smartthings.com/u/jarjar)\ **Post date:** [January 18, 2024, 3:00pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2623 "2024-01-18T15:00:47Z")
> [@Post Requests for Zigbee Edge Drivers Here (community-created)](https://community.smartthings.com/t/post-requests-for-zigbee-edge-drivers-here-community-created/262081/96): > > Was a little bummed to see that the Ultraloq U-Bolt Z Wave deadbolt didn’t make the list for the released edge drivers. Hope this can get added. > > - MSR: **0452-0004-0001** > - fw: **1.1** > - networkSecurityLevel: **ZWAVE\_S2\_ACCESS\_CONTROL** > Raw Description zw:Fs2ac type:4001 mfr:0452 prod:0004 model:0001 ver:1.01 zwv:7.14 lib:03 cc:5E,55,98,9F,6C sec:86,72,5A,87,73,80,62,63,85,8E,59,7A Ultraloq U-tec Z Wave U-bolt ---
**Author:** ![Heljar](https://avatars.discourse-cdn.com/v4/letter/h/bbce88/32.png) [@Heljar](https://community.smartthings.com/u/Heljar)\ **Post date:** [January 20, 2024, 11:27pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2624 "2024-01-20T23:27:08Z")
Hi! Does anyone have a driver for Namron z-wave thermostat? I have it installed as energy meter st the moment. ![Screenshot_20240111_234050_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/e/4/e4c05aede17ac5cdcf685b9772c3ad3379f29777.jpeg) ---
**Author:** ![Mariano\_Colmenarejo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mariano_colmenarejo/32/220132_2.png) [@Mariano\_Colmenarejo](https://community.smartthings.com/u/Mariano_Colmenarejo)\ **Post date:** [January 21, 2024, 10:19am UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2625 "2024-01-21T10:19:33Z")
> [@Heljar](#): > > Does anyone have a driver for Namron z-wave thermostat? Hi @Heljar Is your thermostat this model? > **[Products - Namron](https://www.namron.com/products/namron-z-wave-touch-termostat-16a-hvit/)** > > I kalde Norge bruker vi mye av strømmen til oppvarming. En smart termostat hjelper deg å redusere ditt strømforbruk uten at det går ut over komforten. Og selvfølgelig kan du da styre den fra uansett hvor du befinner deg - hjemme, på jobb, eller på... If it is and you just bought it, they have an identical zigbee model and I have a subdriver made for it in my **Zigbee Thermostat Mc** driver, which is tested by the user who ordered it and works fine with all functions. Maybe you can exchange it for that model > **[Products - Namron](https://www.namron.com/products/namron-zigbee-touch-termostat-16a-hvit/)** > > I kalde Norge bruker vi mye av strømmen til oppvarming. En smart termostat hjelper deg å redusere ditt strømforbruk uten at det går ut over komforten. Og selvfølgelig kan du da styre den fra uansett hvor du befinner deg - hjemme, på jobb, eller på... ---
**Author:** ![Heljar](https://avatars.discourse-cdn.com/v4/letter/h/bbce88/32.png) [@Heljar](https://community.smartthings.com/u/Heljar)\ **Post date:** [January 21, 2024, 12:36pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2626 "2024-01-21T12:36:32Z")
Hi! Yes, the black version of this one. Unfortunately already installed, so stuck with it… ---
**Author:** ![Tmclaussen](https://avatars.discourse-cdn.com/v4/letter/t/a9a28c/32.png) [@Tmclaussen](https://community.smartthings.com/u/Tmclaussen)\ **Post date:** [January 24, 2024, 6:54pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2627 "2024-01-24T18:54:34Z")
Can you include fingerprint 010F-0303-1000 to driver Z-Wave Garage Door Opener Mc?☺ ---
**Author:** ![Mariano\_Colmenarejo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mariano_colmenarejo/32/220132_2.png) [@Mariano\_Colmenarejo](https://community.smartthings.com/u/Mariano_Colmenarejo)\ **Post date:** [January 24, 2024, 7:52pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2628 "2024-01-24T19:52:17Z")
> [@Tmclaussen](#): > > Can you include fingerprint 010F-0303-1000 to driver Z-Wave Garage Door Opener Mc? Hi @Tmclaussen As I already told you privately, you want to use a fibaro roller shutter 3 to open and close a garage door. I don’t know if that can be done or not. Some user may know how to do it. What I do know is that I cannot add this device to the zwave garage door opener driver, since it has different command classes and it would not work. You must use Z-Wave Window Treatment Mc driver ---
**Author:** ![jaidank](https://avatars.discourse-cdn.com/v4/letter/j/9d8465/32.png) [@jaidank](https://community.smartthings.com/u/jaidank)\ **Post date:** [January 25, 2024, 5:32pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2629 "2024-01-25T17:32:21Z")
Is there any custom Z-Wave TRV driver that would accept the fingerprint for a new old stock [EUROtronic StellaZ TRV:](https://manual.zwave.eu/backend/make.php?lang=en&sku=EUR_STELLAZ&cert=ZC08-13050002): Id: acf32a13-62cf-4de1-b331-f307650a23a5 DNI: 0x3D Firmware Ver: nil \* Wake Up-Refresh Device Library Ver: nil \* Wake Up-Refresh Device Zw Protocol Ver: nil \* Wake Up-Refresh **Device** **Manufacturer: 0x0148** **Product Type: 0x0001** **Product ID: 0x0001** End Point & Command Class: [1]: BASIC, SWITCH\_MULTILEVEL, SENSOR\_MULTILEVEL, THERMOSTAT\_MODE, THERMOSTAT\_SETPOINT, NODE\_NAMING, BATTERY, WAKE\_UP, MANUFACTURER\_SPECIFIC, VERSION I have searched for the model and can only find old discussions (~2016). ---
**Author:** ![mlchelp](https://avatars.discourse-cdn.com/v4/letter/m/bcef8e/32.png) [@mlchelp](https://community.smartthings.com/u/mlchelp)\ **Post date:** [January 25, 2024, 7:18pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2630 "2024-01-25T19:18:15Z")
There was a recent discussion about the eurotronics Spirit TRV. Maybe that driver will work for you. > [@Eurotronics Spirit TRV](https://community.smartthings.com/t/eurotronics-spirit-trv/116694/321): > > I ve actually upgraded my edge driver for the eurotronics Spirit TRV from the Smartthings zwave europe site: [SmartThings Edge-Driver-Collection | Z-Wave Europe - The leading european distributor for Smart Home products.](https://zwave.eu/smartthings_edge_driver_collection/) there you can search and choose your device driver and see if it is working. Eurotronics Spirit TRV works good here and also with LCD Backlight off and other functions [Samsung account](https://bestow-regional.api.smartthings.com/invite/akMXvzDBLlb3) ---
**Author:** ![jaidank](https://avatars.discourse-cdn.com/v4/letter/j/9d8465/32.png) [@jaidank](https://community.smartthings.com/u/jaidank)\ **Post date:** [January 25, 2024, 11:15pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2631 "2024-01-25T23:15:53Z")
Thanks for the pointer. The StellaZ has no display. If I could get the source for the Spirit I would try playing.with it. I will probably try hacking the SmartThings Popp TRV driver in the meantime. I need to get my Edge development environment up and running on my new MacBook. Cheers, Aidan ---
**Author:** ![SuperBob](https://avatars.discourse-cdn.com/v4/letter/s/91b2a8/32.png) [@SuperBob](https://community.smartthings.com/u/SuperBob)\ **Post date:** [February 18, 2024, 3:13am UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2632 "2024-02-18T03:13:02Z")
Hi @Mariano_Colmenarejo I was told you wrote a driver for the Vision ZM1601US Siren / Strobe? Apparently the advice was that it just needs the fingerprint added to work, so I’m hoping you could do that. I was on ST 5 years ago, but when Bruce’s Rule Machine left the platform, I went to Habitat. I’m only now coming back to ST. I had modified many groovy drivers on my own to work for various things, but the new Edge architecture is much different and really this is the only device that didn’t work out of the 100+ devices I added to the Aeotec V3 hub, I recently obtained. Anyway, here is the info I hope helps to get this device going. I think it was originally branded as GoControl that I got many moons ago at Home Depot in a kit with some sensors. All of which I still use. Manufacturer Code: 014F-2005-0503 Model: 2005-0503 Thanks so much in advance and if you can’t, I very much appreciate your looking. Best! -Bob ---
**Author:** ![Mariano\_Colmenarejo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mariano_colmenarejo/32/220132_2.png) [@Mariano\_Colmenarejo](https://community.smartthings.com/u/Mariano_Colmenarejo)\ **Post date:** [February 18, 2024, 10:13am UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2633 "2024-02-18T10:13:15Z")
> [@SuperBob](#): > > Manufacturer Code: 014F-2005-0503 > Model: 2005-0503 Hi @SuperBob This Siren was added to my driver Z-Wave Siren Mc some days ago. Install my driver in your Hub from [my channel](https://api.smartthings.com/invitation-web/accept?id=6b68563b-1905-4654-8d2b-e677a2997424) and install siren with search nearby option > [@Which Edge Driver for GoControl Alarm Siren so it Works with STHM?](https://community.smartthings.com/t/which-edge-driver-for-gocontrol-alarm-siren-so-it-works-with-sthm/277862/4): > > Aded to this driver version, try if it works ─────────────────────────────────────────────────── Name Z-Wave Siren Mc Version 2024-02-04T12:37:18.561174784 ─────────────────────────────────────────────────── - id: 014F/2005/0503 deviceLabel: ZM1601US-5 Siren manufacturerId: 0x014F productType: 0x2005 productId: 0x0503 deviceProfileName: alarm-battery ---
**Author:** ![SuperBob](https://avatars.discourse-cdn.com/v4/letter/s/91b2a8/32.png) [@SuperBob](https://community.smartthings.com/u/SuperBob)\ **Post date:** [February 18, 2024, 1:39pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2634 "2024-02-18T13:39:17Z")
That’s awesome Mariano! I’ll try it out and report back. Thanks so much 🙂 ---
**Author:** ![SuperBob](https://avatars.discourse-cdn.com/v4/letter/s/91b2a8/32.png) [@SuperBob](https://community.smartthings.com/u/SuperBob)\ **Post date:** [February 18, 2024, 3:26pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2635 "2024-02-18T15:26:00Z")
Yup, that worked! I just had to remove it and re-add it, because simply changing it’s driver didn’t give it an on/off button to work with (for the sake of anyone else that sees this). I also saw in your list of drivers one that I switched out for my First Alert ZCOMBO devices that were showing offline and that seems to work now too. 🙂 ---
**Author:** ![nullsoul](https://avatars.discourse-cdn.com/v4/letter/n/8491ac/32.png) [@nullsoul](https://community.smartthings.com/u/nullsoul)\ **Post date:** [March 21, 2024, 11:33am UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2636 "2024-03-21T11:33:56Z")
Can I ask for adding fingerprint: 013C-0004-0084 (Philio Outdoor Siren, [Philio PSE04 Multiple Sound Siren User Manual](https://manuals.plus/philio/pse04-multiple-sound-siren-manual-2)) to the “z-wave siren mc” driver? It has similar options as the one already present there: - id: 013C/0004/000A deviceLabel: Philio Siren manufacturerId: 0x013C productType: 0x0004 productId: 0x000A deviceProfileName: philio-sound-siren Product id (0x0084) and the final fingerprint differs only from it, so the details would be as follows: - id: 013C/0004/0084 deviceLabel: Philio Siren manufacturerId: 0x013C productType: 0x0004 productId: 0x0084 deviceProfileName: philio-sound-siren Thank you! ---
**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\ **Post date:** [June 23, 2024, 5:21pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2637 "2024-06-23T17:21:58Z")
12 posts were split to a new topic: [Zwave siren Mc help needed](https://community.smartthings.com/t/zwave-siren-mc-help-needed/283527) ---
**Author:** ![tmielonen](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/tmielonen/32/52661_2.png) [@tmielonen](https://community.smartthings.com/u/tmielonen)\ **Post date:** [March 26, 2024, 12:36pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2638 "2024-03-26T12:36:45Z")
Hello, I have three Danfoss (sometimes branded Devolo) Z-Wave Wall Thermostats that have been relegated to only temperature sensors with the stock Z-Wave Sensor EDGE driver. They are not detected as Z-Wave Thermostats, as I am assuming the device fingerprints are not matching. Any help would be great (@Mariano_Colmenarejo I’m using a number of your edge drivers, but these still do not match up as Z-Wave Thermostats, only Z-Wave “sensors”) - Thanks! These are fairly simple devices, and all I want is to set a “heat set point” as expected and use the temperature sensor value for automations. **Here is all the device info I can get:** Z-Wave Device: Id: 8b772b28-65e8-40cf-b0d8-dc26b336f469 DNI: 0x2A Firmware Ver: 1.0 Library Ver: 6 Zw Protocol Ver: 3.67 Manufacturer: Ox0002 Product Type: 0x0003 Product ID: 0x8010 End Point & Command Class: BASIC, MANUFACTURER\_SPECIFIC, VERSION, BATTERY, MULTILCMD, WAKE\_UP, PROTECTION, CONFIGURATION, SENSOR\_MULTILEVEL, CENTRAL\_SCENE THERMOSTAT\_SETPOINT, SCHEDULE, INDICATOR ---
**Author:** ![Mariano\_Colmenarejo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mariano_colmenarejo/32/220132_2.png) [@Mariano\_Colmenarejo](https://community.smartthings.com/u/Mariano_Colmenarejo)\ **Post date:** [March 26, 2024, 5:47pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2639 "2024-03-26T17:47:42Z")
> [@tmielonen](#): > > Manufacturer: Ox0002 > Product Type: 0x0003 > Product ID: 0x8010 Hi, Added to this driver version, try it if works ```auto ─────────────────────────────────────────────────── Name Z-Wave Thermostat Mc Version 2024-03-26T17:44:43.555128086 ─────────────────────────────────────────────────── - id: "Devolo/Danfoss/014G0160" deviceLabel: Danfoss or Devolo RS014G0160 manufacturerId: 0x0002 productType: 0x0003 productId: 0x8010 deviceProfileName: temp-thermostat-heating-battery ``` [Previous page](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327.md?page=40) [Next page](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327.md?page=42)