# Post Requests for Zwave Edge Drivers Here (community-created) **URL:** \ **Category:** Community Created Drivers\ **Tags:** edge-device, aftergroovy\ **Created:** [January 5, 2022, 3:30pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327 "2022-01-05T15:30:01Z")\ **Posts on this page:** 20\ **Page:** 35
**Author:** ![jamesonrw](https://avatars.discourse-cdn.com/v4/letter/j/ad7895/32.png) [@jamesonrw](https://community.smartthings.com/u/jamesonrw)\ **Post date:** [July 1, 2023, 8:29pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2487 "2023-07-01T20:29:10Z")
ive tried this and it continually falls offline. Are you seeing something different? ---
**Author:** ![georgeh](https://avatars.discourse-cdn.com/v4/letter/g/8edcca/32.png) [@georgeh](https://community.smartthings.com/u/georgeh)\ **Post date:** [July 2, 2023, 8:05pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2488 "2023-07-02T20:05:45Z")
Hi @cguidashome , wondering if you happened to find an alternate edge driver for these monoprice tilt sensors? Mine were auto-migrated sometime in the last couple of days, and no longer work (in my case they seem stuck “open”. thanks ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [July 2, 2023, 9:11pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2489 "2023-07-02T21:11:08Z")
Try Z-Wave Sensor PH. Link to it is 3 posts above yours. ---
**Author:** ![georgeh](https://avatars.discourse-cdn.com/v4/letter/g/8edcca/32.png) [@georgeh](https://community.smartthings.com/u/georgeh)\ **Post date:** [July 2, 2023, 10:39pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2490 "2023-07-02T22:39:33Z")
Gave it a try, unfortunately no joy for this tilt sensor… still stuck open. ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [July 2, 2023, 10:47pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2491 "2023-07-02T22:47:28Z")
Sorry that didn’t work. It seems to be a problem device. > [@Monoprice garage tilt sensor not recognized correctly by hub](https://community.smartthings.com/t/monoprice-garage-tilt-sensor-not-recognized-correctly-by-hub/262677): > > Greetings everyone, I have two Monoprice garage door tilt sensors (ZG8101US) which are integrated into a Smartthings V2 hub along with other devices. I have been using these (identical) sensors with external - open/close sensors enabled (instead of tilt detection). One of the sensors (let’s call it sensor #2) was not recognized by the hub and I had to delete and add it again to the hub (via Z-Wave). Sensor #2 is now being recognized as a “Vision Door/Window Sensor” and it is lacking “EnableExternalSensor” function in settings, which is still visible in the sensor #1. I tried removing adding sensor #2 couple of times, but still the same. Sensor #1 does not seem to have any name/brand within Smartthings Information, as opposed to sensor 2 which is being shown as - Vision Door/Window Sensor… ---
**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\ **Post date:** [July 3, 2023, 6:22pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2492 "2023-07-03T18:22:54Z")
Split this topic on July 3, 2023, 6:22pm UTC 3 posts were merged into an existing topic: [[ST EDGE] Z-Wave Sensor Driver Channel - including specific Ecolink, FortrezZ, HomeSeer and Zooz models](https://community.smartthings.com/t/st-edge-z-wave-sensor-driver-channel-including-specific-ecolink-fortrezz-homeseer-and-zooz-models/248133/116) ---
**Author:** ![corystew](https://avatars.discourse-cdn.com/v4/letter/c/cdc98d/32.png) [@corystew](https://community.smartthings.com/u/corystew)\ **Post date:** [July 5, 2023, 2:07pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2493 "2023-07-05T14:07:15Z")
ISO Edge Driver for Z-Wave Plus Eaton RFTR9605-TAW Duplex Receptacle. I need to enable the default startup of the device to be powered on. This is I believe a parameter that needs to be set to enable the default state of powered on. The default SmartThings edge driver for Z-Wave switch does not have this option enabled. Parameter list… ![image](https://global.discourse-cdn.com/smartthings/original/3X/5/2/52cef7a9e73fd4400270d4346e096ca888df70b9.png) ---
**Author:** ![corystew](https://avatars.discourse-cdn.com/v4/letter/c/cdc98d/32.png) [@corystew](https://community.smartthings.com/u/corystew)\ **Post date:** [July 5, 2023, 8:19pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2494 "2023-07-05T20:19:10Z")
I was able to set the parameter for the Power up state with the Z-Wave Device Config Mc, Thank you JDRoberts. The default driver is Z-Wave switch. Is there a Edge Driver option that would enable power meter info and switch the outlet? ---
**Author:** ![csstup](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/csstup/32/141481_2.png) [@csstup](https://community.smartthings.com/u/csstup)\ **Post date:** [July 6, 2023, 6:50am UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2495 "2023-07-06T06:50:20Z")
> [@corystew](#): > > Is there a Edge Driver option that would enable power meter info This device doesn’t have power monitoring. I have one of these and will be doing a full custom driver for it soon. Likely will add it to Phil’s consolidated Zwave Switch driver. ---
**Author:** ![dragner](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dragner/32/117447_2.png) [@dragner](https://community.smartthings.com/u/dragner)\ **Post date:** [July 6, 2023, 8:30am UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2496 "2023-07-06T08:30:45Z")
+1 to the Nodon Octan, I found this channel supporting other Nodon remotes but not the Octan ---
**Author:** ![gst](https://avatars.discourse-cdn.com/v4/letter/g/d07c76/32.png) [@gst](https://community.smartthings.com/u/gst)\ **Post date:** [July 8, 2023, 9:23pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2497 "2023-07-08T21:23:29Z")
Were you able to get the Aeotec Doorbell 5 working? ---
**Author:** ![Dennis](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dennis/32/103393_2.png) [@Dennis](https://community.smartthings.com/u/Dennis)\ **Post date:** [July 10, 2023, 4:32pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2498 "2023-07-10T16:32:47Z")
To any Lua coders: I am willing to send a reasonable PayPal payment for converting/writing two drivers. DM me if you are interested in receiving payment for converting and/or writing lua code for these two devices: **GE/Jasco Enbrighten Z-Wave Plus Plug-In Dual, Independently-controlled, Outlet Smart Switch with USB Charging, model 28177** Z-Wave Alliance product information: [https://products.z-wavealliance.org/products/2192](https://products.z-wavealliance.org/products/2192) More info on GitHub: [https://github.com/openhab/org.openhab.binding.zwave/blob/main/doc/ge/28177\_0\_0.md](https://github.com/openhab/org.openhab.binding.zwave/blob/main/doc/ge/28177_0_0.md) **Zooz Z-Wave Plus S2 MultiSiren, model ZSE19** Multisiren manual: [https://www.getzooz.com/downloads/zooz-z-wave-plus-s2-multisiren-zse19-manual.pdf](https://www.getzooz.com/downloads/zooz-z-wave-plus-s2-multisiren-zse19-manual.pdf) ZSE19 Groovy code: [https://github.com/krlaframboise/SmartThings/blob/master/devicetypes/krlaframboise/zooz-s2-multisiren.src/zooz-s2-multisiren.groovy](https://github.com/krlaframboise/SmartThings/blob/master/devicetypes/krlaframboise/zooz-s2-multisiren.src/zooz-s2-multisiren.groovy) ---
**Author:** ![csstup](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/csstup/32/141481_2.png) [@csstup](https://community.smartthings.com/u/csstup)\ **Post date:** [July 10, 2023, 5:31pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2499 "2023-07-10T17:31:47Z")
> [@Dennis](#): > > GE/Jasco Enbrighten Z-Wave Plus Plug-In Dual, Independently-controlled, Outlet Smart Switch with USB Charging, model 28177 What does the stock Zwave Switch driver do/not do with this device? No control over the multiple endpoints? I’m willing to take this one on as part of Phil’s GE/Jasco driver set otherwise. > [@Dennis](#): > > Zooz Z-Wave Plus S2 MultiSiren, model ZSE19 I would think @krlaframboise could tackle this as part of the official Zooz driver set. Perhaps because its not sold anymore they’re not wanting to support it? ---
**Author:** ![Dennis](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dennis/32/103393_2.png) [@Dennis](https://community.smartthings.com/u/Dennis)\ **Post date:** [July 10, 2023, 5:46pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2500 "2023-07-10T17:46:29Z")
> [@csstup](#): > > What does the stock Zwave Switch driver do/not do with this device? No control over the multiple endpoints? I’m willing to take this one on as part of Phil’s GE/Jasco driver set otherwise. You’re right, the stock driver does not control the endpoints individually. > [@csstup](#): > > I would think @krlaframboise could tackle this as part of the official Zooz driver set. Perhaps because its not sold anymore they’re not wanting to support it? Right again, Zooz will not provide a driver for the ZSE19 because the product has been discontinued. I’ve already asked for Kevin’s help but he’s currently taking a temporary hiatus from coding. ---
**Author:** ![pmjoen](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/pmjoen/32/29766_2.png) [@pmjoen](https://community.smartthings.com/u/pmjoen)\ **Post date:** [July 10, 2023, 6:54pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2501 "2023-07-10T18:54:25Z")
I am also having a similar issue with this driver and the Mono Price ZWave Plus contact sensor randomly going off-line and not reporting correct battery % (brand new batteries show 1%) ---
**Author:** ![Mark\_Hooper](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mark_hooper/32/93093_2.png) [@Mark\_Hooper](https://community.smartthings.com/u/Mark_Hooper)\ **Post date:** [July 13, 2023, 5:13am UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2502 "2023-07-13T05:13:46Z")
I have an MCO Home MH-S513 touch panel switch which has worked fine for several years, but in the last week stopped working all together. It manually works but is dead with Smartthings. I removed/excluded it from the Smartthings network and included it and it created 4 devices. One for each button (switch) and 1 master switch. All looked good except it still doesn’t work. Smartthings knows when it is turned on and off (and reports this) but cannot perform any controls. When I look at the device on my phone using the Smarthings app I briefly see a message ‘This device hasn’t updated all of its status information yet. Check again later’. That was 72 hours ago and nothing has changed. I’ve noticed on these forums that there are drivers for the 2 and 4 button switches, but not for the 3 button. The driver that has been installed is the generic Z-Wave Switch driver. Any help on how to fix this is appreciated. ![image](https://global.discourse-cdn.com/smartthings/original/3X/b/2/b2c8efd4b0bb030020be945e907ace67c30e1a5a.png) ---
**Author:** ![damohabir](https://avatars.discourse-cdn.com/v4/letter/d/6bbea6/32.png) [@damohabir](https://community.smartthings.com/u/damohabir)\ **Post date:** [July 13, 2023, 4:19pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2503 "2023-07-13T16:19:21Z")
Now that the migration to drivers is now complete for me, I am looking for drivers for the following Z-Wave devices. I have looked everywhere but cannot find drivers for these devices. It might be a fingerprint matching issue. | Name | Aeon Home Energy Meter | | --- | --- | | Mfg Code | null-null-null | | Model | null-null | | Room | Garage | | Presentation ID | 173e6c7f-6ba2-36dc-b242-97e7c4267b32 | | Type | ZWAVE | |Name|Aeon Multisensor| |Room|Basement| |Presentation ID|d29485af-a162-3457-95ff-73e27be69b13| |Type|ZWAVE| |Name|Aeon Multisensor 6 V2| |Room|Driveway| |Presentation ID|173e6c7f-6ba2-36dc-b242-97e7c4267b32| |Type|ZWAVE| ---
**Author:** ![Mariano\_Colmenarejo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mariano_colmenarejo/32/220132_2.png) [@Mariano\_Colmenarejo](https://community.smartthings.com/u/Mariano_Colmenarejo)\ **Post date:** [July 13, 2023, 6:10pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2504 "2023-07-13T18:10:54Z")
> [@damohabir](#): > > |Name|Aeon Multisensor 6 Hi @damohabir That device is wrongly paired, it does not show manufacturer, product type or model, you must pair it again near the hub. If it’s an aeon multisensor 6 it should work with the stock zwave sensor ---
**Author:** ![damohabir](https://avatars.discourse-cdn.com/v4/letter/d/6bbea6/32.png) [@damohabir](https://community.smartthings.com/u/damohabir)\ **Post date:** [July 13, 2023, 7:10pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2505 "2023-07-13T19:10:37Z")
Thanks @Mariano_Colmenarejo . I don’t know why that one didn’t migrate properly, but two others did. I re-paired it and now it picked up the correct driver. ---
**Author:** ![defiant\_uk](https://avatars.discourse-cdn.com/v4/letter/d/e8c25b/32.png) [@defiant\_uk](https://community.smartthings.com/u/defiant_uk)\ **Post date:** [July 17, 2023, 12:58pm UTC](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327/2506 "2023-07-17T12:58:38Z")
Hi all, I have some DLink DCH-Z510 Sirens that had been working fine with Smart Home Monitor. I’ve noticed that they’re no longer recognised as Sirens and as such aren’t selectable in SHM. They seem to using the generic Z-Wave Switch driver. Would welcome some guidance on how to get them recognised as Sirens so they can be used in SHM once more. Thanks, Paul [Previous page](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327.md?page=34) [Next page](https://community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327.md?page=36)