Post Requests for LAN/WIFI Edge Drivers Here (community-created)

Diegocampy · March 1, 2022, 10:36pm

Excuse me, I had not seen this topic, and I had created a topic for my particular request:

JDRoberts · March 1, 2022, 10:43pm

No problem, this topic is just to help keep the requests organized and avoid too many duplicate topics. but if you get a response in your own topic, that’s good, too.

Diegocampy · March 3, 2022, 12:42pm

Considering that Netatmo’s native thermostat integration is poor and updates the gni 6 hours, maybe some developer l thinking to create an edge drive? Am I asking for something too complicated to do? I think there would be many interested

Raimundo · March 16, 2022, 9:31pm

Hello, would anyone be interested in creating a driver for LAN control of Yeelight’s bulb and screenbar lamps?

I have one of the hot/cold white bulb model YLDP01YL

And a YLTD003 screen bar

Currently, as far as I know, there is no driver for LAN control on these models.

Nezmo · March 19, 2022, 1:29pm

Yamaha AVR Integration Using Edge? Connected Things

Posting on the chance someone more skilled than I could take on creating an Edge integration with Yamaha receivers. There is an existing community integration that no longer works for new setups. It still works for now if you already had it implemented but you can no longer add additional receivers and of course, it’s going to die totally at some point being Groovy based. A nice, feature rich Yamaha ST integration would be great in my mind. But most importantly, on/off, scene select, zone select, and volume would be very helpful. They are pretty popular AVRs and I’m surprised Yamaha have not embraced ST integration to be honest. Here’s the existing integration: [RELEASE] Yamaha Network Receiver Basic Integration

Jason_Meudt · April 21, 2022, 10:17pm

I actually have 2 requests…

The fIrst, and foremost, is a Fully-Kiosk Browser edge driver. Here is the DTH that I am currently using:

github.com

bloodtick/SmartThings/blob/master/devicetypes/bloodtick/fully-kiosk-browser-device.src/fully-kiosk-browser-device.groovy

/**
*  Copyright 2021 Bloodtick
*
*  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
*  in compliance with the License. You may obtain a copy of the License at:
*
*      http://www.apache.org/licenses/LICENSE-2.0
*
*  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
*  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
*  for the specific language governing permissions and limitations under the License.
*
*  Fully Kiosk Browser Device
*  Thanks to Arn Burkhoff similar driver concerning TTS functions. 
*
*  Update: Bloodtick Jones
*  Date: 2020-09-07
*
*  1.0.00 2020-09-07 First release to support Hubitat. Must have Fully 1.40.3 or greater to use becuase of new command struture.
*  1.0.01 2020-09-08 Added runIn delay in parse for sendPostCmd

This file has been truncated. show original

I have previously asked the developer if they were going to implement a driver.

[OBSOLETE] Fully Kiosk Browser Controller (DTH) Community Created SmartApps

Well, I asked the Fully-Kiosk folks and Alexey will not be doing anything with the resources they have… Thank you for detailed information. Unfortunately we are Android specialist and we barely have enough capacity to maintain the Fully Kiosk apps with all the features. For now it’s very impossible for us to develop and maintain additional driver software for the Smartthings intergration. In fact there are many systems like Smartthings on the market. We can’t serve all of them as we want to focus on the good app, cloud and service. We must let other developers who know those systems to make the integration. Alexey I see so many talented folks creating a variety of new EDGE drivers, and with the ‘framework’ from the existing DTH’s currently in existence, maybe one of them can be talke…

The second is for a z-wave leak detector with this info from the IDE:

zw:S type:0701 mfr:0258 prod:0003 model:0085 ver:2.54 zwv:4.05 lib:06 cc:5E,86,72,5A,73,80,71,30,85,59,84,70

It is similar to this DOME leak sensor DTH, based on this post:

[OBSOLETE] Dome Leak Sensor (Official)

Somehow, despite being paired, STHM always seems to have difficulties with the current implementation.

-Jason

Cor_Oskam · April 26, 2022, 8:17pm

Would be great if this DH dan be converted tot Edge:

github.com

ahndee/Envoy-ST/blob/master/devicetypes/aamann/solaredge.src/solaredge.groovy

/**
 *	SolarEdge Solar System
 *
 *	Copyright 2016 Andreas Amann
 *
 *	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *	in compliance with the License. You may obtain a copy of the License at:
 *
 *			http://www.apache.org/licenses/LICENSE-2.0
 *
 *	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *	for the specific language governing permissions and limitations under the License.
 *
 */

def version() {
	return "0.2.4 (20190308)\n© 2016–2019 Andreas Amann"
}

This file has been truncated. show original

reading out my Solarpanels so I can start device like dishwasher and washing machine when enough power is available

orangebucket · April 26, 2022, 9:30pm

Edge drivers are intended for hub connected devices. That handler is accessing a cloud based API. So yes if you want to to be treated as a device it will need a new integration, but Edge isn’t really the tool for the job.

Cor_Oskam · April 26, 2022, 9:32pm

You are right. But what if Groovy isn’t supported anymore?

blueyetisoftware · April 27, 2022, 1:01am

There is a separate Rules API and schema connector for cloud devices. It is also new, just not Edge. Edge is the new architecture for onboard devices.

orangebucket · April 27, 2022, 6:43am

I’m not saying the device might not need a ‘new’ integration (I don’t know if anyone has already been working on one), but there are different types and Edge is pretty much the last piece in the jigsaw and is pitched very much at devices that communicate directly with the hub. For example, the ‘schema’ integration, widely used for cloud to cloud integrations, has been live for over three years now.

mvevitsis · May 18, 2022, 1:26pm

Has anyone made an edge driver for awair?

troy_owens · May 18, 2022, 3:50pm

This may be of good news to you. Late last month, Govee confirmed late last month that their roadmap does indeed include an official Smartthings integration stated as coming very soon. Awesome news because if we had lost this integration either Smartthings or Govee would be leaving my home and with the amount of Govee lighting I have it would almost certainly have been Smartthings leaving in favor of Hubitat.

brenthaag · May 22, 2022, 8:35pm

Request to add an Edge LAN driver for Gen 2 AirScape whole house fans. The API is documented here: Gen 2 Controls API – AirScape Engineer's Blog

Flrdb · May 26, 2022, 9:14am

I’d like a edge driver for my netatmo weather station with indoor and outdoor modules. Currently its working with a smartapp.

TAustin · June 8, 2022, 10:42pm

All this takes is some simple HTTP requests to be sent, which you can do using my Web Requestor Edge driver.

DM me if you need more assistance.

fido · June 9, 2022, 8:00pm

Request for wifi enabled Levoit Air purifier control via API

Device funtions
Fan speed
Auto 1,2,3,4, sleep
Indoor PM2.5 live report
On off
Display on off
Auto settings, default, quite, efficient inc variable speed
Graph for indoor PM2.5
Graph for matching fan speed

Robert_Olofsson · July 13, 2022, 8:17pm

Roborock s5 and gardena robomower smart sileno.

montyfert · July 20, 2022, 4:35pm

hi i know this is for edge drivers but how about an edge app posibly cast-web

netcsk · July 28, 2022, 1:40pm

I’d like to request the Flume Flow Meter, which is a LAN device that straps on the street flow meter to collect whole home flow data.

There are two versions as smart apps / DH:

[RELEASE] Flume Water Meter Smartthings Smartapp + Flume Water Meter Device Handler Community Created SmartApps

https://www.amazon.com/Flume-Smart-Home-Water-Sensor/dp/B07GPXKN8Z/ref=sr_1_1?keywords=flume+water+meter&qid=1568400732&s=gateway&sr=8-1 It doesn’t have the home/away that stream labs water meter has so the interface looks slightly different. It will turn to ‘wet’ if a Low Flow Leak is detected by Flume Water Meter. Also you will need to adjust for your time zone line 337. Since it’s a frankenstein app it might have redundant methods…feel free to clean up methods or debug statements as you see fit. Acknowledgements: My first Smartthings app and groovy stab, want to thank @windsurfer99 for his implementation: [RELEASE] StreamLabs Smart Home Water Meter Interface also thank @joshs85 [RELEASE] Honeywell Lyric Water Leak Sensor Connect also thank michaeldavie Flume Water Meter - Hard…

[OBSOLETE] SmarThings Smart App and Device Handler for Flume Smart Home Water Monitor Community Created SmartApps

Code is available at: GitHub - tronikos/FlumeSmartThings: SmarThings Smart App and Device Handler for Flume Smart Home Water Monitor Direct links to code: SmartApp code Device Handler code Local proxy code Features Leak sensor Changes to wet on low flow leaks Changes to wet on any usage alert (configurable) Changes to dry when notification is deleted in the flume app or when it’s read (configurable) Wet/dry status can be permanently or temporarily paused (with configurable time lime) Water usage for the last full minute, today, this month, this year is shown in the device page as well as the dashboard water usage stats, connection status, battery level, away mode are exposed as attributes for webCoRE automations When SmartThings changes to away, Flume can be put in away mode th…

I use the second version as it avoids rate limiting shared by all users by calling to the API from local rather than ST servers.
A strong want would be to expose flow rate directly to automations versus just a display value / webcore value.

I also realize this would be difficult as it requires calling to a remote API and thus likely an intermediate step like what @TAustin has done for other LAN devices with his bridge server. Thanks for any consideration!

Post Requests for LAN/WIFI Edge Drivers Here (community-created)

Customers

Developers

Download the SmartThings App