Post Requests for Edge Drivers Here (community-created)

K_White · January 10, 2022, 10:14pm

Yes, fans/lights are what I’m referring to and the fact that the documentation for this is available.

http://docs-local.appbond.com/

mvevitsis · January 10, 2022, 10:21pm

If you haven’t already, don’t forget to bug flair for a local API

K_White · January 11, 2022, 3:58pm

I was requesting this feature, to see if it could be added as an edge driver

GRClark · January 20, 2022, 2:14am

If you can’t find one already written, you can ask here if any community developer would be interested in creating one.

@iquix @Mariano_Colmenarejo @TAustin @ygerlovin @philh30 @veonua

Not sure if there’s already drivers available or not, but I’d be intererested in the following:

Fibaro Wall Plug US ZW5
Fibaro Wall Plug USB
Iris Plug w/ ZigBee & Z-Wave Repeater featuring KWh
Aeotec Multisensor 6
Zooz S2 Multisiren
Virtual Acceleration Sensor
Momentary Button
Device Group capabilities like TrendSetter

Any one of those would be greatly appreciated!

JDRoberts · January 20, 2022, 2:16am

Zooz is working on Edge Drivers for most of their devices, but are not going to release them publicly until edge itself is out of beta.

JDRoberts · January 20, 2022, 2:19am

VEdge by @TAustin can create a virtual momentary device.

[ST Edge] vEdge Creator: a virtual device generator for end users Community Created Device Types

Here is an Edge driver that will enable end-users to create virtual devices that run locally on-hub. Features: Supports the following virtual device types: air quality, alarm, battery, contact, door, light, lock, momentary, motion, presence, shade, smoke, switch, switchlevel/dimmer, thermostat, water Includes a switch in virtual devices to control device state (also useful for Alexa triggers) Create any number of virtual devices Easy and fast to use: No coding or CLI required Enables you to create 100% local automations with virtual devices Additional enhancements: See how many devices you’ve created of a given type (inventory) Ability to select switch or plug icon for virtual switches Ability to select contact or light icons for virtual contacts Momentary button includes both sw…

TAustin · January 20, 2022, 3:36am

I can look at adding an acceleration sensor to my virtual device driver. As pointed out above, momentary button is already available.

philh30 · January 21, 2022, 11:33am

I have one of these and I’m pretty sure I put it on my GE ZigBee Switch/Dimmer driver. I think the fingerprint for mine is CentraLite 3210-L if I’m picking the right device out of the list. That driver will do power/energy for switches, but nothing else special (I don’t think that device does anything else though). If your fingerprint matches then give that a try.

I haven’t bothered with the Z-wave repeater portion. The driver wouldn’t do anything for it, so I’ll probably just wait for that to be transitioned by ST.

fredrile · January 21, 2022, 11:45am

The Mill Wifi ovens seems to have a bit of a following and an open API:

Original request thread:

Open API:
https://api.millheat.com/share/apidocument

Paul_Oliver · January 21, 2022, 2:23pm

The stock Z-wave repeater edge driver works with the repeater portion of the CentraLite ZigBee plug, Z-wave repeater combo.

Raimundo · January 25, 2022, 1:41pm

@Mariano_Colmenarejo @ygerlovin

Could you take a look at the fingerprint below and see if it’s possible to create a driver or add to an existing one?

It is a water leak sensor, brand ewelink… Works with DHT Everspring Flood Sensor (native)

Tks

Mariano_Colmenarejo · January 25, 2022, 4:57pm

I don’t know if I’m wrong, but the DTH that I find like, DHT Everspring Flood Sensor (native), is from a zwave device

Are you referring to another DTH?

github.com

SmartThingsCommunity/SmartThingsPublic/blob/master/devicetypes/smartthings/everspring-flood-sensor.src/everspring-flood-sensor.groovy

/**
 *  Copyright 2015 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 */
metadata {
	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture", runLocally: true, minHubCoreVersion: '000.024.0000', executeCommandsLocally: true) {
		capability "Water Sensor"
		capability "Configuration"
		capability "Sensor"
		capability "Battery"
		capability "Health Check"

This file has been truncated. show original

Krzysztof_Lewis · January 25, 2022, 9:06pm

I would love to request integration with Tado thermostat

JDRoberts · January 25, 2022, 9:21pm

Edge Drivers are for hub-connected devices, most commonly Zigbee or zwave. There are some LAN devices as well, but they have to have an open API. Tado does not: they only offer cloud integration. So I think the most probable path for that particular device is to contact the company and ask them to add smartthings integration. It’s not impossible that someone will come up with someway to do it from an edge driver, but it’s probably not likely.

Krzysztof_Lewis · January 25, 2022, 9:34pm

Oh I see. Apologies I’m not very technical. I’m using the user made groovy integration, was hoping the same could be achieved with edge.

Ashley69 · January 26, 2022, 11:55am

@Mariano_Colmenarejo

Please can you add this. It’s a Zigbee dimmer. Thanks

Markusjonsson · January 26, 2022, 12:04pm

Is it possible to make a edge driver to this aqara vibration sensor ?

zigbeeNodeType: SLEEPY_END_DEVICE
application: 08
endpointId: 01
manufacturer: LUMI
model: lumi.vibration.aq1
Raw Description 01 0104 000A 01 04 0000 0003 0019 0101 06 0000 0004 0003 0005 0019 0101

Markus

Krzysztof_Lewis · January 26, 2022, 12:17pm

Apologies if that’s obvious, I’m not very technical. I can see there’s a lot of Ikea bulbs in your channel. Aren’t those supported by edge stock drivers? Currently in groovy I don’t need custom handles for those
Will I need custom edge drivers for ikea once groovy goes away? Will they stop native support?

Raimundo · January 26, 2022, 1:16pm

It is exactly that DHT.
It’s for Z wave devices, but it’s working great for the zigbee sensor (strange, don’t you agree?)

troy_owens · January 26, 2022, 4:23pm

Hold tight. ST will add this officially to the “Zwave Sensor” driver (hopefully soon) as it is a native ST local dth currently which would also include the identical Utilitec model

Post Requests for Edge Drivers Here (community-created)

Customers

Developers

Download the SmartThings App