# \[OBSOLETE\] - Universal ZigBee Lock DTH with Lock Codes **URL:** \ **Category:** Community Created Drivers\ **Tags:** yale, zigbeelocks, dth\_locks, kwikset\ **Created:** [October 5, 2016, 12:34am UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202 "2016-10-05T00:34:34Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![RBoy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/rboy/32/62677_2.png) [@RBoy](https://community.smartthings.com/u/RBoy)\ **Post date:** [March 14, 2017, 3:11pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/61 "2017-03-14T15:11:14Z")
Thanks @jhamstead - great turnaround! Folks using any of the following SmartApps should update to the latest 1.3a handler: > [@\[OBSOLETE\] Lock User Management (LUM)](https://community.smartthings.com/t/release-door-lock-user-code-management-create-delete-and-schedule-codes-with-automatic-lock-unlock-and-shm-integration/7043): > > [Lock User Management](http://smartthings.rboyapps.com) (LUM) is a reliable Lock Manager for remotely managing users and locks It works with the standard Z-Wave Lock/ZigBee device handler that comes with SmartThings and works with any lock that supports remote codes. It can be used to program user codes, be notified when user codes are used and also take actions when codes are used. For automatically generating user codes for rental properties check out [Rental Lock Automater](https://community.smartthings.com/t/release-rental-lock-automater-airbnb-vrbo-homeaway-tripadvisor-booking-expedia/124785/) (RLA). [Click here for a list of lock recommendations](https://community.smartthings.com/t/release-rental-lock-automater-airbnb-vrbo-homeaway-tripadvisor-booking-expedia/124785/17)[Click here for where to buy Z-Wave locks](https://community.smartthings.com/t/cheapest-and-best-z-wave-locks/243704)You can find [installation instructions for LUM](http://www.rboyapps.com/InstallLUM.htm) here Lock Code User Managemen… > [@\[RELEASE\] Lock User Unlock/Lock Door Notifications and Actions](https://community.smartthings.com/t/release-user-unlock-lock-door-notifications-and-actions/38471/): > > User Unlock/Lock Door Notifications and Actions This is a [Lock Manager](http://smartthings.rboyapps.com) for locks which cannot be programmed through SmartThings but can report events through Z-Wave/ZigBee to SmartThings. It provides functionality of managing actions and notifications when users unlock door and lock doors but with using the existing codes programmed into the lock. (i.e. no lock programming). However, while this app replicates all the functionality of the [Lock User Management (LUM)](https://community.smartthings.com/t/door-lock-user-code-management-create-delete-and-schedule-codes-with-automatic-lock-unlock/7043) app, related to taking actions and notifications for users, it does not program the lock codes but rather uses the locks existing programmed users. This is great for folks who don’t want to expose their user codes through the ST platform, don’t want/change the codes often, cannot program codes remotely (e.g. RFID cards, FOB’s, … ---
**Author:** ![SADMAN](https://avatars.discourse-cdn.com/v4/letter/s/9de053/32.png) [@SADMAN](https://community.smartthings.com/u/SADMAN)\ **Post date:** [April 1, 2017, 6:57pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/62 "2017-04-01T18:57:24Z")
Any chance the set code feature will be able to work on Yale Zigbee locks in the future? ---
**Author:** ![jhamstead](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jhamstead/32/38969_2.png) [@jhamstead](https://community.smartthings.com/u/jhamstead)\ **Post date:** [April 1, 2017, 8:21pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/63 "2017-04-01T20:21:58Z")
I’m not sure what you mean. setCode is fully supported on all ZigBee locks with my DTH including Yale. If you have a Yale version that is not working let me know the model and fingerprint. ---
**Author:** ![SADMAN](https://avatars.discourse-cdn.com/v4/letter/s/9de053/32.png) [@SADMAN](https://community.smartthings.com/u/SADMAN)\ **Post date:** [April 1, 2017, 8:42pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/64 "2017-04-01T20:42:24Z")
Hello In the release notes of the handler it says: Setting/Deleting/Updating Lock User Codes as well as reporting their use to lock manager SmartApps. Enhanced lock action status: jammed lock, used code information, manual/remote notification. Yale Locks Only: Volume, AutoLock, Privacy Mode, Wrong Code Entry Limit, Invalid Code Entry Lockout Time, and One Touch Locking are all configurable. On my Yale YRD210 I cant seem to be able to manage any access codes from the app Am I doing something wrong? Apologies I am new to the smartthings world ---
**Author:** ![jhamstead](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jhamstead/32/38969_2.png) [@jhamstead](https://community.smartthings.com/u/jhamstead)\ **Post date:** [April 1, 2017, 8:59pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/65 "2017-04-01T20:59:34Z")
The code management must be done through a SmartApp. My code is a DTH that allows for the SmartApps to work with ZigBee locks. There are two main SmartApps available in the community. The first is a free version by @ethayer’s. I personally use this version. > [@\[OBSOLETE\] Lock Manager](https://community.smartthings.com/t/release-lock-manager/63022): > > Lock Manager Incomplete List of features: Manage user codes on locks. Manage Keypads. Review and manage active lock codes. Set lock access based on schedules. Receive notifications when a user used their code. Run Hello Home phrases based on lock/unlock events. Manage Hello Home phrases based on keypad inputs. This app works using 3 child apps and 1 parent app. It is recommended that you install all 4 apps, however if you do not use keypad devices, it is not required to install the keypad child app. Note: If upgrading from any beta version, it is required to uninstall the app completely before installing. The architecture of this app has changed in a way that is incompatible with previous versions. How To Install User guide has old information. There is now only one app to insta… The second is by @RBoy. It is a paid version but highly regarded. > [@\[OBSOLETE\] Lock User Management (LUM)](https://community.smartthings.com/t/release-door-lock-user-code-management-create-delete-and-schedule-codes-with-automatic-lock-unlock-custom-user-actions-and-shm-integration/7043): > > [Lock User Management](http://smartthings.rboyapps.com) (LUM) is a reliable Lock Manager for remotely managing users and locks It works with the standard Z-Wave Lock/ZigBee device handler that comes with SmartThings and works with any lock that supports remote codes. It can be used to program user codes, be notified when user codes are used and also take actions when codes are used. For automatically generating user codes for rental properties check out [Rental Lock Automater](https://community.smartthings.com/t/release-rental-lock-automater-airbnb-vrbo-homeaway-tripadvisor-booking-expedia/124785/) (RLA). [Click here for a list of lock recommendations](https://community.smartthings.com/t/release-rental-lock-automater-airbnb-vrbo-homeaway-tripadvisor-booking-expedia/124785/17)[Click here for where to buy Z-Wave locks](https://community.smartthings.com/t/cheapest-and-best-z-wave-locks/243704)You can find [installation instructions for LUM](http://www.rboyapps.com/InstallLUM.htm) here Lock Code User Managemen… ---
**Author:** ![SADMAN](https://avatars.discourse-cdn.com/v4/letter/s/9de053/32.png) [@SADMAN](https://community.smartthings.com/u/SADMAN)\ **Post date:** [April 1, 2017, 9:18pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/66 "2017-04-01T21:18:02Z")
I loaded Ethayers Lock Manager yesterday, did all the config through Github loaded the 3 child apps, and then configured the Universal Zigbee handler and edited it in My devices. I loaded the Lock Manager and can configure new access codes but they dont seem to upload to the lock? am i missing something? ---
**Author:** ![jhamstead](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jhamstead/32/38969_2.png) [@jhamstead](https://community.smartthings.com/u/jhamstead)\ **Post date:** [April 1, 2017, 9:40pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/67 "2017-04-01T21:40:56Z")
If everything is working, you should see a message like below in the recently tab. ![](https://global.discourse-cdn.com/smartthings/original/3X/5/a/5ae469f6149af764eb8328208af845bf64f45dcf.png) If you are not seeing this message, check again to make sure everything is installed correctly. If that still doesn’t work, it would help to see your live logs for the SmartApp and lock when adding a new code. If you send live logs, I’d recommend sending them in a PM to me. ---
**Author:** ![SADMAN](https://avatars.discourse-cdn.com/v4/letter/s/9de053/32.png) [@SADMAN](https://community.smartthings.com/u/SADMAN)\ **Post date:** [April 1, 2017, 9:47pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/68 "2017-04-01T21:47:21Z")
Holy F&#@, after I went to that view in my smart app everything started working, I removed the lock and app and started over…oh well cant thank you enough, it seems to be working Hooray! Have a nice weekend! Spencer ---
**Author:** ![jhamstead](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jhamstead/32/38969_2.png) [@jhamstead](https://community.smartthings.com/u/jhamstead)\ **Post date:** [April 4, 2017, 1:03am UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/69 "2017-04-04T01:03:27Z")
Update: Version 1.4 Released. This version modifies Health Check to match SmartThings changes to the default ZigBee Lock DTH. To enable the new settings, press force reconfigure button after upgrading. ---
**Author:** ![superhuynh](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@superhuynh](https://community.smartthings.com/u/superhuynh)\ **Post date:** [May 5, 2017, 12:36am UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/70 "2017-05-05T00:36:32Z")
I have a Yale Zigbee lock. Will this app let’s you change the time of the Autolock to a custom time? 30 seconds is too short. If not, is there an app that will do that for the Yale zigbee? I don’t need the other features. ---
**Author:** ![jhamstead](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jhamstead/32/38969_2.png) [@jhamstead](https://community.smartthings.com/u/jhamstead)\ **Post date:** [May 5, 2017, 1:01am UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/71 "2017-05-05T01:01:23Z")
Yes. This DTH will allow you to change the Autolock time for Yale locks up to 180 seconds. You can adjust the preferred time in settings, then enable Autolock if not enabled. ---
**Author:** ![superhuynh](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@superhuynh](https://community.smartthings.com/u/superhuynh)\ **Post date:** [May 5, 2017, 11:47am UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/72 "2017-05-05T11:47:37Z")
Is there a way to make it longer? I was thinking of 10 minutes. ---
**Author:** ![marcos.scheffler](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/marcos.scheffler/32/207519_2.png) [@marcos.scheffler](https://community.smartthings.com/u/marcos.scheffler)\ **Post date:** [May 5, 2017, 12:42pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/73 "2017-05-05T12:42:58Z")
You can use the Enhanced Auto Lock Door SmartApp form the Marketplace. With this smartapp you can even define a contact sensor to check if the door is closed/open before trigger the lock/unlock command. Att, Marcos ---
**Author:** ![superhuynh](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@superhuynh](https://community.smartthings.com/u/superhuynh)\ **Post date:** [May 5, 2017, 5:33pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/74 "2017-05-05T17:33:00Z")
Enhanced auto door lock seem to require door sensors, which i don’t have. I just want something that when a door is unlocked, wait a specified time (ie 10 minutes) and then check status of the lock. If it is still unlocked, then lock it. If it is already locked then don’t do anything. I don’t want it to issue a lock command when it’s already locked, that seems like a waste of battery for the lock everyday. ---
**Author:** ![michaelahess](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/michaelahess/32/27733_2.png) [@michaelahess](https://community.smartthings.com/u/michaelahess)\ **Post date:** [May 5, 2017, 5:40pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/75 "2017-05-05T17:40:18Z")
The device is still in contact with the hub, a couple lock commands that won’t do anything isn’t going to affect your battery appreciably. ---
**Author:** ![superhuynh](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@superhuynh](https://community.smartthings.com/u/superhuynh)\ **Post date:** [May 5, 2017, 5:55pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/76 "2017-05-05T17:55:10Z")
So it’s not going to try to force the motor to turn if it’s already locked? Well, again, I can’t seem to get Enhanced door lock to work without setting a door sensor, which I don’t have. ---
**Author:** ![superhuynh](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@superhuynh](https://community.smartthings.com/u/superhuynh)\ **Post date:** [May 5, 2017, 5:56pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/77 "2017-05-05T17:56:33Z")
I also try changing the code of this device handler, changing the range from 180 sec to 1800 sec. When i put in a value larger than 180, I am not able to enable AutoLock feature. ---
**Author:** ![superhuynh](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@superhuynh](https://community.smartthings.com/u/superhuynh)\ **Post date:** [May 5, 2017, 6:02pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/78 "2017-05-05T18:02:45Z")
Just tested it out. As I thought, using Autolock, it tries to engage the motor to lock the door, even when it is already locked. That can’t be good for the motor can it? I would rather do a smartapp autolock that sees whether it is locked or not. ---
**Author:** ![superhuynh](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@superhuynh](https://community.smartthings.com/u/superhuynh)\ **Post date:** [May 5, 2017, 6:10pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/79 "2017-05-05T18:10:09Z")
Am i able to use any of the smartapps for the Z wave version on a Yale Zigbee lock? ---
**Author:** ![michaelahess](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/michaelahess/32/27733_2.png) [@michaelahess](https://community.smartthings.com/u/michaelahess)\ **Post date:** [May 5, 2017, 6:12pm UTC](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202/80 "2017-05-05T18:12:40Z")
Mine don’t do that. The lock knows it’s locked so doesn’t try to relock. Not sure what to tell ya on that one. [Previous page](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202.md?page=3) [Next page](https://community.smartthings.com/t/obsolete-universal-zigbee-lock-dth-with-lock-codes/59202.md?page=5)