2020-05-27 - Update: The firmware listed in the thread is now (has been for a while) a “Universal” firmware that works with just about any ESP8266 based RGB/WW/CW controller. You just need to assign the proper pin numbers in the web interface of the device after you add it to the wifi network. Thank…

i use the led strips with google home and it works perfectly except for one thing… I cannot make the ledstrip white leds (white is in Port W1) be turned on by commmand (White level slider in the app), and that’s the one the wife likes… Anyone found a solution for that or should i be making virtual …

Not sure if this would work, but you if you only like white, maybe you could just run that as one of the other colors and just have to remember to trigger that color for white?

I merged your changes to the master branch. The only bug that I have found is when the “mutually exclusive” option is selected in the device preferences. This is because the device gets sent the level changes for w1/2 and also gets sent rgb of 000000. It sees the second request as an attempt to chan…

Thanks. I guess I’ll share a video of me using a momentary switch I installed under the cabinets so the wife has manual control of the lights. Alexa will be the main source of control though. And yes I used cat5 it’s great because it’s white and i can hide it in the corner of the cabinets. And has …

I’m having the same issue as you @grego892 . Did you ever figure this out? EDIT: Just updated to the most recent device handler from Git and seems to have fixed the issue.

I’m curious about what you ended up doing. I’m trying to do something similar, but not using an existing physical switch. Instead of having a physical switch in the wall, I’m hoping to include a small momentary dimmer switch ( http://a.co/2awSyFA , http://a.co/dS6N6H8 or http://a.co/a50jWXb ) to go thr…

[image] dr_sanders: I’m hoping to include a small momentary dimmer switch ( Amazon.com , Amazon.com or http://a.co/a50jWXb ) to go through J3 The way the H801 J3 input works is with dry momentary contacts that means unpowered. It looks like those switches are for dimming and they are powered? Th…

[image] dr_sanders: I guess what I’m asking is what the J3 controls? Is there any customizable (I haven’t searched through the code yet) to just control one color (W2)? Yes you can customize what “Default Color” will come on with the J3 switch input. I did mine using W1 because with the older…

Very helpful. Thanks for the feedback and quick responses @dalec ! Yes, the switches I was looking at (one delivered so far) are for on/off as well as dimming. They would normally go in line with the LED strip when there’s not any type of controller involved. My hope was to provide my wife with a ph…

[OBSOLETE] SmartLife (H801) RGBW LED Strip Wifi Controller & Bulb

Devices & Integrations Community Created Drivers

alkiax (adam lowery) February 7, 2017, 4:03pm 525

Thanks so much for everyones updates on this. I’ve read through the majority of this thread and going to buy stuff this week to do it all. Going to start with just the kitchen cabinets. Hopefully I don’t run into any problems.

[DEPRECATED] ST_Anything - Arduino/ESP8266/ESP32

Topic		Replies	Views
RGB and RGBW LED strip lights Devices & Integrations	71	62444	February 24, 2018
[OBSOLETE] 3A Nue RGBW strip controller with normal RGBW led strip lights: Manufacturer’s DTH Community Created Drivers dth_lighting , project_lighting	126	10411	March 27, 2021
ST-compatible RGBW LED Strip Controller Reviews (2023) Connected Things project_lighting , device_review , aftergroovy	96	29909	August 1, 2024
Fibaro RGBW Controller (DTH link in post 32, police light smartapp link in post 79) Connected Things project_pool , project_lighting , project_iyf	534	74466	April 16, 2018
[OBSOLETE] Magic Home WiFi LED Control Community Created Drivers dth_lighting , requires_server	179	163672	May 5, 2021

[OBSOLETE] SmartLife (H801) RGBW LED Strip Wifi Controller & Bulb

Related topics