# \[OBSOLETE\] Original & Aqara Xiaomi Zigbee Sensors (contact, temp, motion, button, outlet, leak, etc)

**URL:** <https://community.smartthings.com/t/obsolete-original-aqara-xiaomi-zigbee-sensors-contact-temp-motion-button-outlet-leak-etc/113253>\
**Category:** Community Created Drivers\
**Created:** [January 3, 2018, 3:30am UTC](https://community.smartthings.com/t/obsolete-original-aqara-xiaomi-zigbee-sensors-contact-temp-motion-button-outlet-leak-etc/113253 "2018-01-03T03:30:31Z")\
**Posts on this page:** 1\
**Showing post:** 1457

<div class="post-metadata">

**Author:** ![veeceeoh](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/veeceeoh/32/96174_2.png) [@veeceeoh](https://community.smartthings.com/u/veeceeoh)\
**Post date:** [June 7, 2019, 5:29pm UTC](https://community.smartthings.com/t/obsolete-original-aqara-xiaomi-zigbee-sensors-contact-temp-motion-button-outlet-leak-etc/113253/1457 "2019-06-07T17:29:36Z")

</div>

> [@daven](#):
>
> Yes I’m aware of the repeater issue when pairing and I move the devices next to the hub when I re-add them. I figured the RSSI would be high enough to drown out any repeaters

This is not guaranteed to work, because after moving the Xiaomi / Aqara devices into their final location, they may still try to switch over to a repeater with a stronger signal than the hub, and if the repeater isn’t “compatible”, then those Xiaomi / Aqara devices will either drop off the network or exhibit other strange behaviors, such as messages being dropped by the repeater.

The best practice is to simply **only** use repeaters _known to work with Xiaomi / Aqara_ devices, and pair them in the location where they will “live”, rather than near the hub.

> [@daven](#):
>
> I do have the offending ZigBee light bulbs from SengLED and I think these repeat.

Sengled bulbs do not work as repeaters:

> Our Element bulbs were designed to be used as Zigbee end devices only. Our engineers made this distinction as repeaters require constant power, but people still tend to power off their bulbs with wall switches when leaving a room. With no power to the repeater, other end devices may disconnect. The fact that our Element bulbs are not repeaters also ensures that your Zigbee Mesh Network doesn’t become overcrowded, which would delay any user controls.

* * *

* * *

> [@Rubin\_Chen](#):
>
> Anyone know if this works with v3 hub?

Aqara / Xiaomi devices have been reported to work with the v3 hub, however the older _SmartThings “Classic” mobile app_ must be used for full functionality and compatibility.

* * *

* * *

> [@cuberob](#):
>
> That said I am also planning to replace my current (in wall) light switches with some Aqara ones, I was mainly looking at these: [No Neutral Dual Wall Switch](https://nl.aliexpress.com/item/Originele-Xiaomi-Aqara-Mijia-Smart-home-Lichtregeling-Enkele-Fire-wire-ZigBee-Draadloze-Sleutel-Wandschakelaar-Via-Smartphone/32996390198.html?spm=a2g0s.9042311.0.0.5ec84c4dyAmX9D) (QBKG03LM) to be able to control my current lights. But after stumbling upon this topic I’ve grown a bit concerned as to how well this will be working. I’m mainly reading about the wireless switches, and even that support seems to be iffy.

The device handlers for the **mains-powered** Aqara Zigbee wireless light switches are not available in the repository linked in the first post of this thread. However, other community users have built device handlers, and as I understand it, have had success with getting the no-neutral Aqara Wireless Wall Switch model QBKG03LM working. I suggest reading through this other thread for more information (especially looking at the most recent posts at the end):

> [@\[OBSOLETE\] Device Handler for Aqara Wired Wall Switch](https://community.smartthings.com/t/device-handler-for-aqara-wired-wall-switch/101062):
>
> \*\* This DTH is no longer supported \*\* Pls refer to [Device Handler for Aqara 2 Gang Wired Wall Switch no Neutral](https://community.smartthings.com/t/device-handler-for-aqara-2-gang-wired-wall-switch-no-neutral/182600) for the latest supported version. This is DTH for 86x86 Aqara Wired wall switch. It comes in 4 variants. Single Gang Neutral Required Dual Gang Neutral Required Single Gang Neutral NOT required Dual Gang Neutral NOT required Just to avoid confusion, this is what it looks like:

Good luck!

---

_[View the full topic](https://community.smartthings.com/t/obsolete-original-aqara-xiaomi-zigbee-sensors-contact-temp-motion-button-outlet-leak-etc/113253)._
