(EDGE Driver-Mc): Z-Wave Edge Drivers and others with FIBARO devices:

Hi @JBurg

Is this correct like this?

I can add a profile for 2 probes, I guess the second probe will send the temperature to endpoint 9.

That would be great to have two separate displays for both temperatures, so automations can be executed on each temperature independently.

@JBurg

I’ll do it tomorrow and I’ll let you know so you can try it.

Thanks very much… have a good night!

From Fibaro Smart Implant manual:

Endpoint 8-13 (when DS18S20 sensors connected)
Generic Device 
Class GENERIC_TYPE_SENSOR_MULTILEVEL
Specific Device 
Class SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Command 
Classes
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
COMMAND_CLASS_ASSOCIATION [0x85]
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIA-
TION [0x8E]
COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
COMMAND_CLASS_NOTIFICATION [0x71]
COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
COMMAND_CLASS_SUPERVISION [0x6C]
COMMAND_CLASS_APPLICATION_STATUS [0x22]
COMMAND_CLASS_SECURITY [0x98]
COMMAND_CLASS_SECURITY_2 [0x9F]
Description Temperature – external sensor DS18B20 No 1-6

The manual is available here Smart Implant | FIBARO Manuals

Hi @JBurg @sflamm

Try with this diver BETA-2

  • Added profile to 2 external temperature probes
  • Added preference to select 1 or 2 probes profile
  • You can create child virtual thermostat for probe 1 a nd probe 2 as option.
  • In tile internal temp will show for profile 2 probes

Install this driver version
Perform a driver change to this driver and wait one minute to install new driver
Close device and perform app delete cache memory to see new profile
In device settings preferences select 2 external temperature probes

This driver works for 1 or 2 extenal temperature probes

───────────────────────────────────────────────────
 Name         Fibaro Smart Implant BETA-2
 Package Key  zwave-fibaro-smart-implant-2
───────────────────────────────────────────────────

Thank @TapioX
I already had it, it would have been impossible to do it without a manual :+1:

2 Likes

I updated the driver with the method you explained and also changed the settings to show two external temperature sensors. However, the display appears to show no different that the original Beta driver. Not sure what else to do.

Are you delete the App cache if you use android?

If you use IOs, I think closing app, I do not sue

I am using IOS, but I switched the driver and then offloaded the Smartthings app just to delete any temporary files. Restarted app, phone, etc. No luck.

I don’t know what IOs users do so that the new profile is shown when the profile is changed in preferences.

You can try to reinstall the driver with the CLI to see if it takes the correct profile now that it has the option of 2 probes in the preference

I got it working. It was my fault. I forgot to enable the virtual thermostat. Thanks again for your time and patience. It’s muchh appreciated.

It seems that when I add a routine, the temperature range that I can select must be between -4 to 122 deg F. Since this is for a home boiler application, temperatures will regularly exceed this limitation. Is there a way to fix this, or is it a Smartthings issue?

The stock capability has this limit but the virtual Thermostat set points have -50 yo 250°c

Got it. Looks like that limitation has been mentioned a few times in the community. I wonder how the ovidiu.pruteanu device handler was able to exceed that limit?

Hi Mariano, i have four external temperature sensors attached to the fibaro smart implant, I use it to monitor the temperatures of 4 heating circuits, the maximum are 6 DS18S20. Can you add a profile for 4 o 6?
Thanks for your great effort

Hola @svalenciano

I will add all profiles, 1 to 6 probes.
Te aviso cuando esté hecho

1 Like

I will add new limits -50 to 250ºC in the next version

@svalenciano @JBurg
Added 6 profiles to use 1 to 6 external temperature probes
added new limit -50ºc to 250ºc for all temperatures in device

Try and tell me if works fine

───────────────────────────────────────────────────
 Name         Fibaro Smart Implant BETA-2
 Version      2023-02-11T13:05:01.628883766        
───────────────────────────────────────────────────
1 Like

You are amazing. IOS is slow to update the driver. I’ll keep trying to get the new one and will let you know when it does.