(New Release) Beta Edge Drivers Z-Wave with more FIBARO devices:

Hello @Mariano_Colmenarejo.

I have this device:

Data
MSR: 0258-0200-1027
networkSecurityLevel: ZWAVE_S2_FAILED

Raw Description
zw:L type:1001 mfr:0258 prod:0200 model:1027 ver:2.21 zwv:6.04 lib:03 cc:5E,98,9F,55,73,86,85,8E,59,72,5A,25,32,71,70,6C

which is a Neo Coolcam plug with metering.
Could you add it to your Z-Wave Switch Mc or Z-Wave Switch and Childs Mc? I don’t know which one is the best. This device has no child, so I guess it should be Z-Wave Switch Mc. Unless the Z-Wave Switch and Childs Mc replaces the other one :slight_smile:

Hi @yosarian

some like this

Raw Description
zw:L type:1001 mfr:0258 prod:0200 model:1027 ver:2.21 zwv:6.04 lib:03 cc:5E,98,9F,55,73,86,85,8E,59,72,5A,25,32,71,70,6

Hi @andre_petinga

Added to this driver version. This driver is the one that will keep updating

───────────────────────────────────────────────────
 Name         Z-Wave Switch and Childs Mc
 Version      2022-09-28T13:19:50.881297248        
───────────────────────────────────────────────────
  - id: 0258/0200/1027
    deviceLabel: NEO Coolcam Outlet
    manufacturerId: 0x0258
    productType: 0x0200
    productId: 0x1027
    deviceProfileName: metering-plug
1 Like

I get a few different ones (all for different SGD-211 modules):

zw:L type:1101 mfr:010F prod:0100 model:0109 ver:1.09 zwv:3.42 lib:03 cc:72,86,70,85,8E,26,27,73 ccOut:26,2B

zw:L type:1101 mfr:010F prod:0100 model:100A ver:2.02 zwv:3.52 lib:03 cc:72,86,70,85,8E,26,7A,27,73 ccOut:26,2B

zw:L type:1101 mfr:000F prod:0000 model:100A ver:0.00 zwv:0.00 lib:00 cc:72,86,70,85,8E,26,7A,27,73 ccOut:26,2B

Hello @Mariano_Colmenarejo

Can you add this device to your library? (Z-Wave Bulb Mc)

Then I make a return on its operation.

zw:L type:1101 mfr:0159 prod:0001 model:0054 ver:2.95 zwv:4.24 lib:03 cc:5E,86,72,5A,73,26,33,70,85,59,25,7A role:05 ff:8600 ui:8600

Thanks!!

Hi @fido

I passed it to this thread

You can try this other Z-Wave Swich and Child Mc controller, it has some changes to see if it works better.

You can also read all the parameters to see what values they have and check them with the documentation

1 Like

Added to this driver version as generic dimmer

───────────────────────────────────────────────────
 Name         Z-Wave Switch and Child Mc
 Version      2022-09-28T19:25:13.56930109        
───────────────────────────────────────────────────
  - id: 010F/0100
    deviceLabel: Fibaro Dimmer 1
    manufacturerId: 0x010F
    productType: 0x0100
    deviceProfileName: switch-level
  - id: 010F/0000/100A
    deviceLabel: Fibaro Dimmer 1
    manufacturerId: 0x010F
    productType: 0x0000
    productId: 0x100A
    deviceProfileName: switch-level
1 Like

Added to this driver version as generic without device parameters
I don’t know if it will work well with defaults edge

───────────────────────────────────────────────────
 Name         Z-Wave Bulb Mc
 Version      2022-09-28T20:06:18.410835305        
───────────────────────────────────────────────────
- id: Flush RGBW Dimmer
  deviceLabel: Flush RGBW Dimmer
  manufacturerId: 0x0159
  productType: 0x0001
  productId: 0x0054
  deviceProfileName: rgbw-bulb

A few things I’ve noticed when using the Z-Wave Bulb Mc (ver. 2022-09-07) with the Zooz ZEN31 RGBW. Curious if anyone else is seeing these issues with the ZEN31 and this specific driver.

  • The Multi-Tile type doesn’t work to turn on the RGB or White switches (at least not consistently). They just spin until it times out.

  • Google Home doesn’t show the color option when pulling the device from ST.

  • I’m unable to change programmed sequence settings. I have a no connection icon (cloud with line through it) instead of the settings icon (gear cog).

Hi @groundzero2010

The multi-tile buttons send the same commands that detailview buttons. The problem could be the zwave Network or the app!!

This is the problem with secondary components in smartthings. They will fix???

Can be that capability does not initialized when device installed. I will see the code and fix it

Hi @groundzero2010

Try with this driver version.
When this version is installed read the value of the parameter 157 and emit event for programmedSequence attribute
You can install with CLI or wait to update automatically

───────────────────────────────────────────────────
 Name         Z-Wave Bulb Mc
 Version      2022-09-29T09:21:00.132276979        
───────────────────────────────────────────────────

Hi mariano, were you able to find the solution to this problem? Unfortunately I have tried all the configurations but it does not work … the open and close status updates after many minutes while the temperature is not signaled in any way. So there is some mistake that I cannot understand.

Hi @alefavara
Every time you open and close it takes several minutes to update the state?

For the temperature i need see driver logs with the CLI

to see the driver logs with the CLI how can I help you? What can I do to help you? it takes about 7/8 minutes to see the correct open or closed status

this is the post how install CLI in Windows PC

Sorry a forgot reply

This device is i the stock beta driver Z-Wave Sensor

  - id: 010F/0701/2001 # Fibaro Open/Closed Sensor with temperature (FGK-10X) / NA
    deviceLabel: Fibaro Open/Closed Sensor
    manufacturerId: 0x010F
    productType: 0x0701
    productId: 0x2001
    deviceProfileName: fibaro-door-window-sensor-temperature
1 Like

Thank you for the reply. will convert later today. Fingers crossed. Wish they still made this as it has been a great way to monitor my freezers operations.

I have the latest version now but not sure what you mean by read parameter 157. Looking at the settings, if the parameter number is after the setting, mine stops at 152. Remote transition time.

Hello, @alefavara

I have been looking at the manual and it seems that for the outdoor sensor to work, you first have to connect it and then pair it to the Hub.
So I have set the one with temperature as the pairing profile, so that it is configured correctly in the pairing. Zwave devices are more complicated to add or remove capabilities dynamically than in zigbee, especially when defaults handlers are used

Install this version and exclude the device and pair it again to see if the temperature works

───────────────────────────────────────────────────
 Name         Z-Wave Sensor Mc
 Version      2022-09-30T10:54:21.492535506        
───────────────────────────────────────────────────

Hi @groundzero2010
I just wanted to tell you the details of how I was going to initialize the value of the capability to change the sequence and show not a cloud.
This parameter in controlled in my driver by a custom capability instead of preference setting in order to use with automation and scenes

Parameter 157 is for the Fibaro RGBW-442 and Zooz zen 31

  1. Start programmed sequence
    Setting this parameter will start programmed sequence with selected number. User can define own sequences via controller. While
    the sequence is active, the menu is unavailable.
    Parameter size 1B
    Default value 0 (sequence inactive)
    Available
    values
    0 – sequence inactive
    1-5 – user-defined sequence
    6 – Fireplace sequence
    7 – Storm sequence
    8 – Rainbow sequence
    9 – Aurora sequence
    10 – Police (red-white-blue) sequence

Parameter 72 is for the Fibaro RGBW-441

  1. Starting predefined program when device set to work in RGB/RGBW mode

Parameter is relevant for main controllers other than Home Center only.

Available settings: 1-10 (animation program number)
Default setting: 1
Parameter size: 1 [byte]