(NEW RELEASE) Beta Edge Driver Zigbee Light Multifunction Mc

Hi @neod192

Sorry, Fixed in this driver version

───────────────────────────────────────────────────
 Name         Zigbee Light Multifunction Mc            
 Version      2022-11-19T19:10:08.753922831        
───────────────────────────────────────────────────
  - id: "GLEDOPTO/GL-C-009"
    deviceLabel: GLEDOPTO GL-C-009
    manufacturer: GLEDOPTO
    model: GL-C-009
    deviceProfileName: switch-level
1 Like

Could you please add this fingerprint to Zigbee light multifunction?

  • zigbeeNodeType: ROUTER
  • application: 07
  • endpointId: 01
  • manufacturer: YSRSAI
  • model: ZB-CL01
    Raw Description 01 C05E 0210 02 07 0000 0003 0004 0005 0006 0008 0300 00

It is RGB+CCT led strip controller

Thanks.

Hi @Mariano_Colmenarejo
I am using your driver Zigbee light Multifunction Mc with Ikea Tradfri bulb E27 CWS opal 600lm

but the driver not able to get the status of color temperature as below


any idea why?

Also I have another question, how i can use this driver to change color by external remote. each time i press the remote key to change the color to next color. I am not looking to have continuous color change, only i want to have each time I press remote key to move to next color
Much appreciated

Hi @amin300

These Ikea bulbs were in the rgb-level profile.
Some users have commented to me that ikea CWS bulbs have 2200k-4000k color temperature control.

I have not any to check this.

I changed them all CWS to rgbw-colorTemperture-2200-4000 profile.

If the color temperature control doesn’t work on this one, I’ll put it back on the rgb-level profile.

You can try to set the color temperature with a routine or activate the circadian function and turn the bulb off and on so that it sends the color temperature corresponding to the local time.

The function to change by external steps is only available for level and color temperature.

Thanks @Mariano_Colmenarejo

I tried to create to set the color temperature with routine but color temerature didnt change. I think this bulb doesn’t support color temerature

Hi @amin300

What exact model is, please?

Ikea Tradfri bulb E27 CWS opal 600lm

Modifies to level-rgb profile

───────────────────────────────────────────────────
 Name         Zigbee Light Multifunction Mc           
 Version      2022-11-21T18:59:54.088049969        
───────────────────────────────────────────────────
  - id: "TRADFRI bulb E27 CWS opal 600lm"
    deviceLabel: IKEA E27 Bulb
    manufacturer: IKEA of Sweden
    model: TRADFRI bulb E27 CWS opal 600lm
    deviceProfileName: level-rgb # no RGBW @amin300

Hey, could you help me out with a couple of devices?

  1. My specific Ledvance bulb isn’t there in the fingerprints. I have Ledvance A60S RGBW bulb which isn’t able to use the drivers. Data from IDE:
  • application: 00
  • endpointId: 01
  • firmwareFullVersion: 02136550
  • firmwareImageType: 160
  • firmwareManufacturerCode: 4489
  • manufacturer: LEDVANCE
  • model: A60S RGBW
  • zigbeeNodeType: ROUTER

Raw Description: 01 0104 010D 01 09 0000 0003 0004 0005 0006 0008 0300 0B05 1000 01 0019

  1. I have Z-Wave Window treatment and switches by TechniSat that also need drivers, do you think you would be able to add those?

a. https://products.z-wavealliance.org/products/3779?selectedFrequencyId=1
b. https://products.z-wavealliance.org/products/3798?selectedFrequencyId=1
c. https://products.z-wavealliance.org/products/3677?selectedFrequencyId=1
d. https://products.z-wavealliance.org/products/3778?selectedFrequencyId=1

Thanks! :slight_smile:

Hi @rowschank

Added to this driver version

───────────────────────────────────────────────────
 Name         Zigbee Light Multifunction Mc        
 Version      2022-11-22T18:23:01.789228024        
───────────────────────────────────────────────────
  - id: "LEDVANCE/A60S RGBW"
    deviceLabel: LEDVANCE A60S RGBW
    manufacturer: LEDVANCE
    model: A60S RGBW
    deviceProfileName: rgbw-level-colortemp-2700-6500

For zwave devices I have to watch it slower. I’ll tell you something

Excellent, thank you! :heart:

I hope you are able to figure out something for the Z-Wave devices; I think they’re not too dissimilar to maybe other in-wall controllers, but they have extra mounting hardware for the switches. But I’m not sure. As it is, things like scene control they describe don’t work with Smartthings so I’m not bothered if those go away.

I’m new to this so im not sure if im doing something wrong, but I cant seem the driver to run on the following device:

  • application: 42
  • endpointId: 01
  • manufacturer: _TZ3000_quqaeew6
  • model: TS0505B
  • zigbeeNodeType: ROUTER
  • Raw Description: 01 0104 010D 01 08 0000 0003 0004 0005 0006 1000 0008 0300 02 0019 000A

Is it not supported, or am i doing something wrong?

ETA: its a gu10 rgbw bulb from lidl (livarno)

Hi @Tristanoz

Added to this driver version
If you see that colors are not the correct you select, tell me

───────────────────────────────────────────────────
 Name         Zigbee Light Multifunction Mc             
 Version      2022-11-22T19:42:05.857883595        
───────────────────────────────────────────────────
  - id: "_TZ3000_quqaeew6/TS0505B"
    deviceLabel: TS0505B RGBW
    manufacturer: _TZ3000_quqaeew6
    model: TS0505B
    deviceProfileName: rgbw-level-colortemp-2700-6500

Wow that was fast, its working great now! Thanks a lot :grin:. I’ve just joined but I already am loving the SmartThings community.

2 Likes

Hi @Mariano_Colmenarejo ,
could you please try to add the following
LIDL Livarno LED Ceiling Light (IAN 399629_2110, Version 07/2022, Model No: HG09369)

Currently it works with a stock ZigBee RGBW Bulb DH.
Temperature: 2000-6500K + Colours

  • zigbeeNodeType: ROUTER
  • application: 6B
  • endpointId: 01
  • manufacturer: _TZ3210_c0s1xloa
  • model: TS0505B

Raw Description 01 0104 010D 01 09 0000 0003 0004 0005 0006 1000 0008 0300 EF00 02 0019 000A

Many thanks in advance. :slight_smile:

Hi @zoltan.yy

Added to this driver version

───────────────────────────────────────────────────
 Name         Zigbee Light Multifunction Mc             
 Version      2022-11-23T21:26:48.694669133        
───────────────────────────────────────────────────
  - id: "_TZ3210_c0s1xloa/TS0505B"
    deviceLabel: TS0505B RGBW
    manufacturer: _TZ3210_c0s1xloa
    model: TS0505B
    deviceProfileName: rgbw-level-colortemp-2000-6500

Many thanks, @Mariano_Colmenarejo, it works great.
Your great support and efforts are very appreciated! :wink:

1 Like

Would it be possible to add this bulb, which is basically the same as the GL-B-008ZS (with a final S) one already included in the fingerprints:

Data

  • zigbeeNodeType: ROUTER
  • application: 01
  • endpointId: 0B
  • manufacturer: GLEDOPTO
  • model: GL-B-008Z
    Raw Description 0B C05E 0210 02 07 0000 0003 0004 0005 0006 0008 0300 00

Hi @frayer
Added to this driver version

───────────────────────────────────────────────────
 Name         Zigbee Light Multifunction Mc        
 Version      2022-11-27T16:17:55.477881404        
───────────────────────────────────────────────────
  - id: "GLEDOPTO/GL-B-008Z"
    deviceLabel: GLEDOPTO GL-B-008Z
    manufacturer: GLEDOPTO
    model: GL-B-008Z
    deviceProfileName: rgbw-level-colortemp-2700-6500