The function to change by external steps is only available for level and color temperature.
Thanks @Mariano_Colmenarejo
I tried to create to set the color temperature with routine but color temerature didnt change. I think this bulb doesn’t support color temerature
Ikea Tradfri bulb E27 CWS opal 600lm
Modifies to level-rgb profile
───────────────────────────────────────────────────
Name Zigbee Light Multifunction Mc
Version 2022-11-21T18:59:54.088049969
───────────────────────────────────────────────────
- id: "TRADFRI bulb E27 CWS opal 600lm"
deviceLabel: IKEA E27 Bulb
manufacturer: IKEA of Sweden
model: TRADFRI bulb E27 CWS opal 600lm
deviceProfileName: level-rgb # no RGBW @amin300
Hey, could you help me out with a couple of devices?
- My specific Ledvance bulb isn’t there in the fingerprints. I have Ledvance A60S RGBW bulb which isn’t able to use the drivers. Data from IDE:
- application: 00
- endpointId: 01
- firmwareFullVersion: 02136550
- firmwareImageType: 160
- firmwareManufacturerCode: 4489
- manufacturer: LEDVANCE
- model: A60S RGBW
- zigbeeNodeType: ROUTER
Raw Description: 01 0104 010D 01 09 0000 0003 0004 0005 0006 0008 0300 0B05 1000 01 0019
- I have Z-Wave Window treatment and switches by TechniSat that also need drivers, do you think you would be able to add those?
a. https://products.z-wavealliance.org/products/3779?selectedFrequencyId=1
b. https://products.z-wavealliance.org/products/3798?selectedFrequencyId=1
c. https://products.z-wavealliance.org/products/3677?selectedFrequencyId=1
d. https://products.z-wavealliance.org/products/3778?selectedFrequencyId=1
Thanks!
Hi @rowschank
Added to this driver version
───────────────────────────────────────────────────
Name Zigbee Light Multifunction Mc
Version 2022-11-22T18:23:01.789228024
───────────────────────────────────────────────────
- id: "LEDVANCE/A60S RGBW"
deviceLabel: LEDVANCE A60S RGBW
manufacturer: LEDVANCE
model: A60S RGBW
deviceProfileName: rgbw-level-colortemp-2700-6500
For zwave devices I have to watch it slower. I’ll tell you something
Excellent, thank you!
I hope you are able to figure out something for the Z-Wave devices; I think they’re not too dissimilar to maybe other in-wall controllers, but they have extra mounting hardware for the switches. But I’m not sure. As it is, things like scene control they describe don’t work with Smartthings so I’m not bothered if those go away.
I’m new to this so im not sure if im doing something wrong, but I cant seem the driver to run on the following device:
- application: 42
- endpointId: 01
- manufacturer: _TZ3000_quqaeew6
- model: TS0505B
- zigbeeNodeType: ROUTER
- Raw Description: 01 0104 010D 01 08 0000 0003 0004 0005 0006 1000 0008 0300 02 0019 000A
Is it not supported, or am i doing something wrong?
ETA: its a gu10 rgbw bulb from lidl (livarno)
Hi @Tristanoz
Added to this driver version
If you see that colors are not the correct you select, tell me
───────────────────────────────────────────────────
Name Zigbee Light Multifunction Mc
Version 2022-11-22T19:42:05.857883595
───────────────────────────────────────────────────
- id: "_TZ3000_quqaeew6/TS0505B"
deviceLabel: TS0505B RGBW
manufacturer: _TZ3000_quqaeew6
model: TS0505B
deviceProfileName: rgbw-level-colortemp-2700-6500
Wow that was fast, its working great now! Thanks a lot . I’ve just joined but I already am loving the SmartThings community.
Hi @Mariano_Colmenarejo ,
could you please try to add the following
LIDL Livarno LED Ceiling Light (IAN 399629_2110, Version 07/2022, Model No: HG09369)
Currently it works with a stock ZigBee RGBW Bulb DH.
Temperature: 2000-6500K + Colours
- zigbeeNodeType: ROUTER
- application: 6B
- endpointId: 01
- manufacturer: _TZ3210_c0s1xloa
- model: TS0505B
Raw Description 01 0104 010D 01 09 0000 0003 0004 0005 0006 1000 0008 0300 EF00 02 0019 000A
Many thanks in advance.
Hi @zoltan.yy
Added to this driver version
───────────────────────────────────────────────────
Name Zigbee Light Multifunction Mc
Version 2022-11-23T21:26:48.694669133
───────────────────────────────────────────────────
- id: "_TZ3210_c0s1xloa/TS0505B"
deviceLabel: TS0505B RGBW
manufacturer: _TZ3210_c0s1xloa
model: TS0505B
deviceProfileName: rgbw-level-colortemp-2000-6500
Many thanks, @Mariano_Colmenarejo, it works great.
Your great support and efforts are very appreciated!
Would it be possible to add this bulb, which is basically the same as the GL-B-008ZS (with a final S) one already included in the fingerprints:
Data
- zigbeeNodeType: ROUTER
- application: 01
- endpointId: 0B
- manufacturer: GLEDOPTO
- model: GL-B-008Z
Raw Description 0B C05E 0210 02 07 0000 0003 0004 0005 0006 0008 0300 00
Hi @frayer
Added to this driver version
───────────────────────────────────────────────────
Name Zigbee Light Multifunction Mc
Version 2022-11-27T16:17:55.477881404
───────────────────────────────────────────────────
- id: "GLEDOPTO/GL-B-008Z"
deviceLabel: GLEDOPTO GL-B-008Z
manufacturer: GLEDOPTO
model: GL-B-008Z
deviceProfileName: rgbw-level-colortemp-2700-6500
Great, thank you!
Very much appreciate your work on this! Does this driver work for the 2ID version of the Gledopto GL-C-0008 RGB+CCT controller? (Gledopto GL-C-008-2ID control via MQTT | Zigbee2MQTT)
Historically I’ve had to have a Hue Hub and add to SmartThings through that, or else only have either white or color on but not both. Would love to control this device directly while maintaining independent simultaneous control.
@Mariano_Colmenarejo
Hello, using zigbee light multifunction-v6, my one way dimming works normally.
I have a two-way dimming, can you support it?
yes, this device was added to driver Zigbee Light Multifunction Mc several time ago
- id: "GLEDOPTO/GL-C-008"
deviceLabel: GLEDOPTO GL-C-008
manufacturer: GLEDOPTO
model: GL-C-008
deviceProfileName: rgbw-level-colortemp-2700-6500