# MyQ Garage Door Status stuck in 'Opening' **URL:** \ **Category:** Devices & Integrations\ **Created:** [December 22, 2018, 5:53pm UTC](https://community.smartthings.com/t/myq-garage-door-status-stuck-in-opening/147318 "2018-12-22T17:53:41Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![lukectracy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/lukectracy/32/89110_2.png) [@lukectracy](https://community.smartthings.com/u/lukectracy)\ **Post date:** [December 22, 2018, 5:53pm UTC](https://community.smartthings.com/t/myq-garage-door-status-stuck-in-opening/147318/1 "2018-12-22T17:53:41Z")
I have had MyQ setup and work well for a while now. I use the MyQ garage door with sensor device handler and have a Z-wave Plus Gold Plated Reliability Garage Door Tilt Sensor, White (TILT-ZWAVE2.5-ECO) mounted to the door and included in the garage door group. The tilt sensor accurately identify the state of the door. But the Door Opener doesn’t seem to be picking up changes to it any longer and has the door state stuck in a state of ‘opening’. Any ideas how to restore it to working order? Luke ---
**Author:** ![jkp](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jkp/32/117130_2.png) [@jkp](https://community.smartthings.com/u/jkp)\ **Post date:** [December 22, 2018, 6:02pm UTC](https://community.smartthings.com/t/myq-garage-door-status-stuck-in-opening/147318/2 "2018-12-22T18:02:17Z")
If you are using the MyQ lite app, you may want to post your question in that thread. That way the developer will see it quicker and reply to your question. > [@\[OBSOLETE\] MyQ Lite Door and Lamp Control (for Liftmaster/Chamberlain)](https://community.smartthings.com/t/release-myq-lite-door-and-lamp-control-for-liftmaster-chamberlain/49150): > > This SmartApp integrates Chamberlain/LiftMaster MyQ doors and light controls into SmartThings. It creates a garage door or light switch (MyQ light module, not the light on the door itself) device in your list of Things and allows you to control the device… By tapping the device buttons in the SmartThings mobile app Automatically by your presence (coming or going) in a Routine or other SmartThings rules app Via switch tiles in a SmartTiles dashboard By asking Alexa or Google Home to turn the on the door or light [image] [image] Installation and Usage Follow the instructions and get the code here: [GitHub - brbeaird/SmartThings\_MyQ: Integrate SmartThings with MyQ (Obsolete)](https://github.com/brbeaird/SmartThings_MyQ). Make sure and install the SmartApp code as well as the applicable device handlers An optional (but strongly re… Also, read the last few posts in that thread 😀 ---
**Author:** ![lukectracy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/lukectracy/32/89110_2.png) [@lukectracy](https://community.smartthings.com/u/lukectracy)\ **Post date:** [December 22, 2018, 9:02pm UTC](https://community.smartthings.com/t/myq-garage-door-status-stuck-in-opening/147318/3 "2018-12-22T21:02:56Z")
Thanks!! New to the forum and not used to how it’s organized. Appreciate the pointer. ---
**Author:** ![Eric\_Eklund](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/eric_eklund/32/106130_2.png) [@Eric\_Eklund](https://community.smartthings.com/u/Eric_Eklund)\ **Post date:** [November 21, 2019, 7:05am UTC](https://community.smartthings.com/t/myq-garage-door-status-stuck-in-opening/147318/4 "2019-11-21T07:05:20Z")
Did you ever figure this out? Mine is doing this now? Have no clue what’s going. While it’s it opening status I can still open/close garage door, but the status stays as “Opening”. Any help from anyone is greatly appreciated. Thanks. ---
**Author:** ![zapufast](https://avatars.discourse-cdn.com/v4/letter/z/8dc957/32.png) [@zapufast](https://community.smartthings.com/u/zapufast)\ **Post date:** [December 8, 2019, 1:13pm UTC](https://community.smartthings.com/t/myq-garage-door-status-stuck-in-opening/147318/5 "2019-12-08T13:13:04Z")
Mine is doing the same. Any fix yet? ---
**Author:** ![Frank\_Ma](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/frank_ma/32/107193_2.png) [@Frank\_Ma](https://community.smartthings.com/u/Frank_Ma)\ **Post date:** [December 19, 2019, 6:14pm UTC](https://community.smartthings.com/t/myq-garage-door-status-stuck-in-opening/147318/6 "2019-12-19T18:14:16Z")
same problem here ---
**Author:** ![NoahSchutte](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/noahschutte/32/112880_2.png) [@NoahSchutte](https://community.smartthings.com/u/NoahSchutte)\ **Post date:** [February 8, 2020, 8:45pm UTC](https://community.smartthings.com/t/myq-garage-door-status-stuck-in-opening/147318/7 "2020-02-08T20:45:40Z")
I’m guessing it got too cold? Thanks for zero responses product team. ---
**Author:** ![jkp](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jkp/32/117130_2.png) [@jkp](https://community.smartthings.com/u/jkp)\ **Post date:** [February 8, 2020, 8:52pm UTC](https://community.smartthings.com/t/myq-garage-door-status-stuck-in-opening/147318/8 "2020-02-08T20:52:57Z")
You can try opening the MyQ lite smartapp and clicking on the device and go through the setup and finish by saving. That may or may not resolve the issue. Also, better to post in the MyQ lite thread and the developer may see your post quicker and offer assistance. ---
**Author:** ![NoahSchutte](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/noahschutte/32/112880_2.png) [@NoahSchutte](https://community.smartthings.com/u/NoahSchutte)\ **Post date:** [February 8, 2020, 10:43pm UTC](https://community.smartthings.com/t/myq-garage-door-status-stuck-in-opening/147318/9 "2020-02-08T22:43:38Z")
Connecting device again through “device management” resolved the issue. Thanks team.