My custom ct100 device type

Awesome… thank you!

1-my humidity isn’t updating very often, does connecting the c wire make it update more frequently? I left it off because I discovered my hvac voltage is about 27VAC and the ct100 spec says max is only 25VAC.

2-does ct100 have a fan recirculate mode to run the fan periodically? I thought for sure it did but not seeing it in the device type or ct100 screen

Theresa handful of these device types for ct100. Could anyone chime in as to which to use or which features one has over the other?

I am looking for humidity alerts, possible setpoint problem fixes when setting more than one at a time, and a device optimized for c wire operation (I don’t use the batts).

Thanks so much.

Is there a setting on here where I can have just the fan/blower come on and run for x minutes when when either the A/C or heat has none kicked on for y amount of time>

Why would there be something like that. Thus is a device type not a smart App.

This may be the smartapp you are looking for. I just installed it so I’ll see how it works over next week…

testing this right now, we’ll see how it works. I like that up and down arrows for adjusting thermostat but its a very busy screen (lots of tiles). I wonder if moving the humidity, battery level and state up above heat would be better just so you can see all of the statuses without the need to scroll and then the controls below that for adjusting heat/cool settings.

One thing I notice as well is the temp is displaying the Celsius temp but the display shows F. So right now the current temp is showing 22 and I turned up my heat to 23 and it is showing 23 F. and cool setting 15 F. It is not huge but as long as it is not trying to change my temperature to Fahrenheit lol.

Just came across bug, the down arrow on heat doesn’t work, good thing I had sharp tools installed as well so I could adjust heat that way :).

I’ve noticed a long delay (10+sec? kinda forget now) after clicking the arrows to see the temp update on the CT100.

With turning up heat the app shows switching right away but hitting down arrow does nothing on the app. Not at home right now so I can’t verify if the thermostat is changing but none of the other apps that I use to control the thermostat are reporting a change. I’ve used Sharptools and I have smartthings paired with my Ultrasync Self Contained Hub alarm system.

Hello Everyone. I am new to all of that, and not having good experience yet. I am using an RCA Z-wave TZ450 Thermostat. I hate and cannot use the slider. So, I tried many other custom versions, including this one, in this thread, and they all look better, with one common problem. Cannot change heat temp nor cold temp, Both up and don do not work. Changing the fan status and from heat, to cool to auto work. All versions have the same problem. Any ideas to where to look for a solution? I am not a programmer,. but a bit technical. Thanks for any help.

Anyone having issues lately with the thermostat not responding to the smartapp?
I can see on the IDE that the commands are going through and if I change the thermostat manually it does reflect on the smartapp
This is happening with Jorge the my ct100 and the stock one

This is what happens live logging: hitting the up button several times, the change never gets executed onto the thermostat

ad6bcca9-2267-4322-856e-d2235b8de013 10:51:19 AM: debug calling thermostatSetpointV1.thermostatSetpointSet (heat type = 1) with degrees = 73.0 delay = 500
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:19 AM: debug setHeatingSetpoint(73.0, 500)
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:19 AM: debug Setting heat set point up to: 73
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:19 AM: debug calling thermostatSetpointV1.thermostatSetpointSet (heat type = 1) with degrees = 73.0 delay = 500
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:19 AM: debug setHeatingSetpoint(73.0, 500)
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:19 AM: debug Setting heat set point up to: 73
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:17 AM: debug calling thermostatSetpointV1.thermostatSetpointSet (heat type = 1) with degrees = 73.0 delay = 500
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:17 AM: debug setHeatingSetpoint(73.0, 500)
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:17 AM: debug Setting heat set point up to: 73
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:16 AM: debug calling thermostatSetpointV1.thermostatSetpointSet (heat type = 1) with degrees = 73.0 delay = 500
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:16 AM: debug setHeatingSetpoint(73.0, 500)
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:16 AM: debug Setting heat set point up to: 73
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:15 AM: debug calling thermostatSetpointV1.thermostatSetpointSet (heat type = 1) with degrees = 73.0 delay = 500
ad6bcca9-2267-4322-856e-d2235b8de013 10:51:15 AM: debug setHeatingSetpoint(73.0, 500)

I just added my thermostat and would like to use what you’ve created. Unfortunately, I’m a novice and don’t know how to go about it. Any help with the steps would be greatly appreciated. Note: when I go to things I don’t see an icon or the current temperature for my ct100 only the sliders, so I’m not sure I even paired it correctly.

thanks in advance.

How did you pair ST with UltraSync?

This I must know also!! It would be the answer to using my alexa and keeping all of our lights/ things on our ultrasync!!!

I am having the same problem. I was using the stock device handler and switched to this one. No luck with either device type. This only happened in the last few days and I’m not sure what caused it. Live log (hit 3 times with no effect):

036b63a1-d370-48fb-bd04-a72107df0d3f 12:08:00 AM: debug calling thermostatSetpointV1.thermostatSetpointSet (cool type=2) with degrees = 69.0 delay = 500
036b63a1-d370-48fb-bd04-a72107df0d3f 12:08:00 AM: debug setCoolingSetpoint(69.0, 500)
036b63a1-d370-48fb-bd04-a72107df0d3f 12:08:00 AM: debug Setting cool set point down to: 69
036b63a1-d370-48fb-bd04-a72107df0d3f 12:07:55 AM: debug calling thermostatSetpointV1.thermostatSetpointSet (cool type=2) with degrees = 69.0 delay = 500
036b63a1-d370-48fb-bd04-a72107df0d3f 12:07:55 AM: debug setCoolingSetpoint(69.0, 500)
036b63a1-d370-48fb-bd04-a72107df0d3f 12:07:55 AM: debug Setting cool set point down to: 69
036b63a1-d370-48fb-bd04-a72107df0d3f 12:07:47 AM: debug calling thermostatSetpointV1.thermostatSetpointSet (cool type=2) with degrees = 69.0 delay = 500
036b63a1-d370-48fb-bd04-a72107df0d3f 12:07:47 AM: debug setCoolingSetpoint(69.0, 500)
036b63a1-d370-48fb-bd04-a72107df0d3f 12:07:47 AM: debug Setting cool set point down to: 69

I like this and just started using it. My only suggestion would be to swap the up and down arrows for the temperature control, with down being on the left and up being on the right.

Did you figure it out? Still happening here…

Just changed to the CT100 and found this device handler. I’m having a problem with its auto update. It is not often enough to show when the hvac is running or idle, it can be hours between updates (it has been showing for the last hour that my hvac is cooling when it probably only ran for 4 mins). Does anyone know where the timer for this so I can lower it so it updates more often?

its actually a problem with the therms themselves. Search for pollster and set it to refresh every so often.