# Multi sensor-- change display to just temperature?

**URL:** <https://community.smartthings.com/t/multi-sensor-change-display-to-just-temperature/49314>\
**Category:** Automation Ideas\
**Created:** [June 1, 2016, 9:07pm UTC](https://community.smartthings.com/t/multi-sensor-change-display-to-just-temperature/49314 "2016-06-01T21:07:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Derrek113116](https://avatars.discourse-cdn.com/v4/letter/d/e47c2d/32.png) [@Derrek113116](https://community.smartthings.com/u/Derrek113116)\
**Post date:** [June 1, 2016, 9:07pm UTC](https://community.smartthings.com/t/multi-sensor-change-display-to-just-temperature/49314/1 "2016-06-01T21:07:34Z")

</div>

Is there a way to have the multi sensor only display temperature from the things list?

---

<div class="post-metadata">

**Author:** ![ero4444](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ero4444/32/131402_2.png) [@ero4444](https://community.smartthings.com/u/ero4444)\
**Post date:** [June 1, 2016, 10:16pm UTC](https://community.smartthings.com/t/multi-sensor-change-display-to-just-temperature/49314/2 "2016-06-01T22:16:12Z")

</div>

search. Tho I admit Discourse search is pretty… “bad”, to put it mildly. Low signal to noise.

> [@View temp not motion](https://community.smartthings.com/t/view-temp-not-motion/23996/22):
>
> Not sure if anyone is still looking to change the default display on the mobile app, but I was able to by using the simulator in the IDE. I have three temp/humidity sensors that showed the temp by default. I chose a code template that required a humidity sensor, picked the sensor I wanted to change, then clicked on the config gear in the top right. I could then change which data tile to display, which also changed the default display in the mobile app. Hope that helps!

There are at least three techniques in that thread.

---

<div class="post-metadata">

**Author:** ![Derrek113116](https://avatars.discourse-cdn.com/v4/letter/d/e47c2d/32.png) [@Derrek113116](https://community.smartthings.com/u/Derrek113116)\
**Post date:** [June 1, 2016, 10:49pm UTC](https://community.smartthings.com/t/multi-sensor-change-display-to-just-temperature/49314/3 "2016-06-01T22:49:20Z")

</div>

Got it, thank you, yeah was searching around forever and just gave up multi sensor and temperature came up tons