# Monoprice Z-Wave Garage Door Sensor?

**URL:** <https://community.smartthings.com/t/monoprice-z-wave-garage-door-sensor/12189>\
**Category:** Devices & Integrations\
**Created:** [March 4, 2015, 4:06am UTC](https://community.smartthings.com/t/monoprice-z-wave-garage-door-sensor/12189 "2015-03-04T04:06:59Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [March 20, 2015, 8:43pm UTC](https://community.smartthings.com/t/monoprice-z-wave-garage-door-sensor/12189/14 "2015-03-20T20:43:33Z")

</div>

Cree is a zigbee bulb, and like most ZLL bulbs can only act as a repeater for other ZLL bulbs on its own mini network. (Per manufacturer. Hues are the same way.)

You’d need a plugged in zwave device.

There are a couple of zwave bulbs that _can_ act as zwave repeaters as long as they remain powered on, but they’re not rated for outdoor use so it depends where you want to put them.

> [@Domitech Zwave Bulbs?](http://community.smartthings.com/t/domitech-zwave-bulbs/12858):
>
> Does anyone have experience with the Domitech Zwave LED bulbs? I just bought a handful of them and am pairing to my VeraEdge.

I would add if that “pairing in the room with the ST hub” means you had the sensor in a different room than the one it lives in now, it has no idea who its true neighbors are, so routing is screwed up anyway. So a zwave repair is a good idea.

Talk to support if you don’t know how to do this.

Most field techs I know do 3 repairs in a row to make sure they got all hops, but if you have a small install one may be enough.

---

_[View the full topic](https://community.smartthings.com/t/monoprice-z-wave-garage-door-sensor/12189)._
