# Lowes Deal-of-The-Day Samsung Connect 3 pack AC1300 $89 6/28/18

**URL:** <https://community.smartthings.com/t/lowes-deal-of-the-day-samsung-connect-3-pack-ac1300-89-6-28-18/129373>\
**Category:** Deals\
**Created:** [June 28, 2018, 5:14pm UTC](https://community.smartthings.com/t/lowes-deal-of-the-day-samsung-connect-3-pack-ac1300-89-6-28-18/129373 "2018-06-28T17:14:59Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![kseidehamel](https://avatars.discourse-cdn.com/v4/letter/k/e5b9ba/32.png) [@kseidehamel](https://community.smartthings.com/u/kseidehamel)\
**Post date:** [June 28, 2018, 5:14pm UTC](https://community.smartthings.com/t/lowes-deal-of-the-day-samsung-connect-3-pack-ac1300-89-6-28-18/129373/1 "2018-06-28T17:14:59Z")

</div>

I have been debating whether to give the Connect mesh system a try since I have dead spots around my home, especially the garage and basement. Lowe’s has the Samsung Connect 3 pack (not Pro) on [Lowes.com](http://Lowes.com) deal-of-the-day for $89 so I picked one up. At that price it’s worth a shot to see if it will improve both wifi and Smartthings coverage.

---

<div class="post-metadata">

**Author:** ![Automated\_House](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/automated_house/32/99641_2.png) [@Automated\_House](https://community.smartthings.com/u/Automated_House)\
**Post date:** [June 28, 2018, 5:27pm UTC](https://community.smartthings.com/t/lowes-deal-of-the-day-samsung-connect-3-pack-ac1300-89-6-28-18/129373/2 "2018-06-28T17:27:09Z")

</div>

just be forewarned you will have to setup your SmartThings environment from scratch

---

<div class="post-metadata">

**Author:** ![tommyincville](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/tommyincville/32/71155_2.png) [@tommyincville](https://community.smartthings.com/u/tommyincville)\
**Post date:** [June 28, 2018, 5:39pm UTC](https://community.smartthings.com/t/lowes-deal-of-the-day-samsung-connect-3-pack-ac1300-89-6-28-18/129373/3 "2018-06-28T17:39:48Z")

</div>

Is the hub portion of the Connect set any different than the V2 hub?

---

<div class="post-metadata">

**Author:** ![Automated\_House](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/automated_house/32/99641_2.png) [@Automated\_House](https://community.smartthings.com/u/Automated_House)\
**Post date:** [June 28, 2018, 5:43pm UTC](https://community.smartthings.com/t/lowes-deal-of-the-day-samsung-connect-3-pack-ac1300-89-6-28-18/129373/4 "2018-06-28T17:43:44Z")

</div>

Each satellite has a zigbee and z-wave repeater, which is nice. But it runs a slightly older version of hub firmware, so it supports less local devices

> **[Is my Hub's firmware up to date?](https://support.smartthings.com/hc/en-us/articles/207316543-Is-my-Hub-s-firmware-up-to-date-)**
>
> SmartThings will occasionally push firmware updates to active Hubs to improve performance.
>  
> How will I know when my Hub’s firmware is being updated?
> If downtime is expected during a firmware updat...

---

<div class="post-metadata">

**Author:** ![kseidehamel](https://avatars.discourse-cdn.com/v4/letter/k/e5b9ba/32.png) [@kseidehamel](https://community.smartthings.com/u/kseidehamel)\
**Post date:** [June 28, 2018, 5:48pm UTC](https://community.smartthings.com/t/lowes-deal-of-the-day-samsung-connect-3-pack-ac1300-89-6-28-18/129373/5 "2018-06-28T17:48:30Z")

</div>

Thanks…good to know. Does that mean I will have to reload all the device handlers and SmartApps too?

---

<div class="post-metadata">

**Author:** ![Automated\_House](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/automated_house/32/99641_2.png) [@Automated\_House](https://community.smartthings.com/u/Automated_House)\
**Post date:** [June 28, 2018, 5:56pm UTC](https://community.smartthings.com/t/lowes-deal-of-the-day-samsung-connect-3-pack-ac1300-89-6-28-18/129373/6 "2018-06-28T17:56:37Z")

</div>

That would be a good questions for support. If you currently login with a Samsung account, probably not.

---

<div class="post-metadata">

**Author:** ![rumrunner424](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/rumrunner424/32/95497_2.png) [@rumrunner424](https://community.smartthings.com/u/rumrunner424)\
**Post date:** [June 28, 2018, 11:53pm UTC](https://community.smartthings.com/t/lowes-deal-of-the-day-samsung-connect-3-pack-ac1300-89-6-28-18/129373/7 "2018-06-28T23:53:39Z")

</div>

Since I already have a hub, can these be used just as extender ?

---

<div class="post-metadata">

**Author:** ![Automated\_House](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/automated_house/32/99641_2.png) [@Automated\_House](https://community.smartthings.com/u/Automated_House)\
**Post date:** [June 29, 2018, 3:23am UTC](https://community.smartthings.com/t/lowes-deal-of-the-day-samsung-connect-3-pack-ac1300-89-6-28-18/129373/8 "2018-06-29T03:23:51Z")

</div>

Not with a V2 hub
