# Looking for lightswitch that can be turned on by remote relay

**URL:** <https://community.smartthings.com/t/looking-for-lightswitch-that-can-be-turned-on-by-remote-relay/90223>\
**Category:** Devices & Integrations\
**Created:** [June 17, 2017, 2:51pm UTC](https://community.smartthings.com/t/looking-for-lightswitch-that-can-be-turned-on-by-remote-relay/90223 "2017-06-17T14:51:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ispy](https://avatars.discourse-cdn.com/v4/letter/i/a87d85/32.png) [@ispy](https://community.smartthings.com/u/ispy)\
**Post date:** [June 17, 2017, 2:51pm UTC](https://community.smartthings.com/t/looking-for-lightswitch-that-can-be-turned-on-by-remote-relay/90223/1 "2017-06-17T14:51:40Z")

</div>

I have a need to have a lightswitch (that can function normally as a switch) that I can turn on/off via a relay. Is there anything out there that could possibly do this?

Here is my scenario. I am installing a Pentair Easytouch for my pool with Screenlogic. It has 8 relays to fire different pumps/blowers, etc. It can do lights however my pool is old and when they built it, the light switches for the pool/spa lights are in two different places on my pool deck. No real way to get them wired back to my pump area where my controller will be. So I was going to replace the switches with GE Zwaves but then realized if I can find something that can function as a switch but also fire from a relay via zwave/zigbee, I could use two relays on my panel to activate them from Screenlogic.

Anyone have any ideas?

thanks  
Scott

---

<div class="post-metadata">

**Author:** ![bobbles](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/bobbles/32/76290_2.png) [@bobbles](https://community.smartthings.com/u/bobbles)\
**Post date:** [June 17, 2017, 3:14pm UTC](https://community.smartthings.com/t/looking-for-lightswitch-that-can-be-turned-on-by-remote-relay/90223/2 "2017-06-17T15:14:03Z")

</div>

Will Fibaro switches be suitable?  
There are 2 types.  
[http://www.vesternet.com/z-wave-fibaro-single-switch-2-gen5](http://www.vesternet.com/z-wave-fibaro-single-switch-2-gen5)

---

<div class="post-metadata">

**Author:** ![ispy](https://avatars.discourse-cdn.com/v4/letter/i/a87d85/32.png) [@ispy](https://community.smartthings.com/u/ispy)\
**Post date:** [June 17, 2017, 6:46pm UTC](https://community.smartthings.com/t/looking-for-lightswitch-that-can-be-turned-on-by-remote-relay/90223/3 "2017-06-17T18:46:36Z")

</div>

not sure. aren’t these like 5V feeds? i have one running my kitchen LEDs but i don’t see how that would immediately fire a switch when powered on.
