# KP125M no energy monitoring data **URL:** \ **Category:** Devices & Integrations\ **Created:** [November 10, 2024, 6:51pm UTC](https://community.smartthings.com/t/kp125m-no-energy-monitoring-data/290304 "2024-11-10T18:51:20Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![imcdona](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/imcdona/32/86741_2.png) [@imcdona](https://community.smartthings.com/u/imcdona)\ **Post date:** [November 10, 2024, 6:51pm UTC](https://community.smartthings.com/t/kp125m-no-energy-monitoring-data/290304/1 "2024-11-10T18:51:20Z")
Hello, The energy monitoring dashboard isn’t displaying any energy statistics for my TP-Link KP125M smart plugs. These plugs definitely are collecting energy stats as I can view their usage through both the Kasa and Tapo applications. The latest firmware I applied to these plugs specifically mentions Smartthings support as being available. I’ve reset the plugs to factory defaults and removed them from Smartthings multiple times to no avail. I’ve tried adding them via the Kasa linked service and also the Tapo linked service. I can control the plugs via Smartthings, it’s just the energy monitoring that’s not working. The link to view the energy usage for the plugs is shown when I open a plug in Smartthings. It’s just that no energy usage is being collected. I’m at a loss as to what to do next. Does anyone have an idea on what may be going on? ---
**Author:** ![Andreas\_Roedl](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/andreas_roedl/32/209616_2.png) [@Andreas\_Roedl](https://community.smartthings.com/u/Andreas_Roedl)\ **Post date:** [November 10, 2024, 6:58pm UTC](https://community.smartthings.com/t/kp125m-no-energy-monitoring-data/290304/2 "2024-11-10T18:58:08Z")
> [@imcdona](#): > > I’ve tried adding them via the Kasa linked service and also the Tapo linked service. You should add them via Matter. Edit: just realized that they are probably not Matter 1.3 certified… ---
**Author:** ![h0ckeysk8er](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/h0ckeysk8er/32/195141_2.png) [@h0ckeysk8er](https://community.smartthings.com/u/h0ckeysk8er)\ **Post date:** [November 10, 2024, 10:59pm UTC](https://community.smartthings.com/t/kp125m-no-energy-monitoring-data/290304/3 "2024-11-10T22:59:33Z")
> [@imcdona](#): > > Hello, > > The energy monitoring dashboard isn’t displaying any energy statistics for my TP-Link KP125M smart plugs. > > These plugs definitely are collecting energy stats as I can view their usage through both the Kasa and Tapo applications. > > The latest firmware I applied to these plugs specifically mentions Smartthings support as being available. > > I’ve reset the plugs to factory defaults and removed them from Smartthings multiple times to no avail. I’ve tried adding them via the Kasa linked service and also the Tapo linked service. > > I can control the plugs via Smartthings, it’s just the energy monitoring that’s not working. The link to view the energy usage for the plugs is shown when I open a plug in Smartthings. It’s just that no energy usage is being collected. > > I’m at a loss as to what to do next. > > Does anyone have an idea on what may be going on? Energy reporting was added in Matter 1.3. ST just started supporting 1.3 in the most recent release 54.13. In looking at the matter-switch driver, there is a new profile for non-Eve Matter devices that includes the power consumption capability based on generic deviceTypeID: ```auto - id: "matter/on-off/plug/electrical-sensor" deviceLabel: Matter OnOff Plug deviceTypes: - id: 0x010A # On Off Plug-in Unit - id: 0x0510 # Electrical Sensor deviceProfileName: plug-power-energy-powerConsumption ``` ```auto name: plug-energy-powerConsumption components: - id: main capabilities: - id: switch version: 1 - id: energyMeter version: 1 - id: powerConsumptionReport version: 1 - id: firmwareUpdate version: 1 - id: refresh version: 1 categories: - name: SmartPlug ``` So, two things to check in this case; 1) does the KP125M support Matter 1.3 yet?; and 2) see what deviceTypeIDs the plug identifies as. You can check that out using either the community developed [API Browser+](https://api-browser-plus.pinsky.us) or the ST [CLI](https://github.com/SmartThingsCommunity/smartthings-cli/releases/tag/%40smartthings%2Fcli%401.10.0) using the command “smartthings devices ‘deviceID’ -j”. And, of course, you have to have a ST hub of some type that supports Matter which includes v2/v3/Aeotec hubs, SmartThings Station, and hub-enabled TVs and refrigerators. ```auto Endpoints [{"endpointId":0x00,"deviceTypes":[{"deviceTypeId":0x16}]},{"endpointId":0x01,"deviceTypes":[{"deviceTypeId":0x10D}]},{"endpointId":0x02,"deviceTypes":[{"deviceTypeId":0x106}]},{"endpointId":0x03,"deviceTypes":[{"deviceTypeId":0x107}]}] ``` ```auto "endpoints": [ { "endpointId": 0, "deviceTypes": [ { "deviceTypeId": 22 } ] }, { "endpointId": 1, "deviceTypes": [ { "deviceTypeId": 269 } ] }, { "endpointId": 2, "deviceTypes": [ { "deviceTypeId": 262 } ] }, { "endpointId": 3, "deviceTypes": [ { "deviceTypeId": 263 } ] } ], ``` ---
**Author:** ![Andrew\_Bartlett](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/andrew_bartlett/32/138992_2.png) [@Andrew\_Bartlett](https://community.smartthings.com/u/Andrew_Bartlett)\ **Post date:** [November 11, 2024, 6:16pm UTC](https://community.smartthings.com/t/kp125m-no-energy-monitoring-data/290304/4 "2024-11-11T18:16:22Z")
> [@imcdona](#): > > I’m at a loss as to what to do next. Please follow the instructions on TP Link’s page here and contact their support if necessary, my similar plugs P110M work fine. > **[How to use the Energy Monitoring Features of my TP-Link Smart Plug in...](https://www.tp-link.com/us/support/faq/3822/)** > > Instructions guide you to fully experience and use the energy monitoring features of the TP-Link plug through the SmartThings App ---
**Author:** ![imcdona](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/imcdona/32/86741_2.png) [@imcdona](https://community.smartthings.com/u/imcdona)\ **Post date:** [January 6, 2025, 4:19pm UTC](https://community.smartthings.com/t/kp125m-no-energy-monitoring-data/290304/5 "2025-01-06T16:19:04Z")
I reached out to TP-Link support regarding this issue. After days of going back and forth I finally got through to someone who could actually troubleshoot the issue. According TP-Link, there is an issue preventing energy monitoring data from KP125M devices from populating the energy stats in ST. Last week I was told that the issue would be resolved early this week. 🤞 For energy monitoring to work, you must link your TP-Link Kasa account. Linking the Tapo account won’t import any KP125M devices even if you have your Kasa and Tapo accounts linked on the TP-Link side. ---
**Author:** ![h0ckeysk8er](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/h0ckeysk8er/32/195141_2.png) [@h0ckeysk8er](https://community.smartthings.com/u/h0ckeysk8er)\ **Post date:** [January 6, 2025, 7:18pm UTC](https://community.smartthings.com/t/kp125m-no-energy-monitoring-data/290304/6 "2025-01-06T19:18:37Z")
> [@imcdona](#): > > For energy monitoring to work, you must link your TP-Link Kasa account. Linking the Tapo account won’t import any KP125M devices even if you have your Kasa and Tapo accounts linked on the TP-Link side. Account linking would make the device use cloud-\>cloud integration vs a local Matter integration. Not sure the person you talked to is entirely clued in on how this should work. ---
**Author:** ![Andreas\_Roedl](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/andreas_roedl/32/209616_2.png) [@Andreas\_Roedl](https://community.smartthings.com/u/Andreas_Roedl)\ **Post date:** [January 6, 2025, 7:27pm UTC](https://community.smartthings.com/t/kp125m-no-energy-monitoring-data/290304/7 "2025-01-06T19:27:15Z")
> [@h0ckeysk8er](#): > > Account linking would make the device use cloud-\>cloud integration vs a local Matter integration. Not sure the person you talked to is entirely clued in on how this should work. ![Screenshot_20250106_203420_Samsung Internet](https://global.discourse-cdn.com/smartthings/original/3X/6/5/654d56ab5f44d778e8992ede188d68b1bebebf55.png) > [@Tapo P110M (UK) Matter Smart Plug with energy monitoring, Any good?](https://community.smartthings.com/t/tapo-p110m-uk-matter-smart-plug-with-energy-monitoring-any-good/273421/1): > > With Smartthings if you want energy monitoring in the Smartthings energy app then you must connect your plugs to the Tapo app and then use the Tapo to Smartthings cloud to cloud service. ---
**Author:** ![h0ckeysk8er](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/h0ckeysk8er/32/195141_2.png) [@h0ckeysk8er](https://community.smartthings.com/u/h0ckeysk8er)\ **Post date:** [January 7, 2025, 1:03am UTC](https://community.smartthings.com/t/kp125m-no-energy-monitoring-data/290304/8 "2025-01-07T01:03:12Z")
> [@Tapo P110M (UK) Matter Smart Plug with energy monitoring, Any good?](https://community.smartthings.com/t/tapo-p110m-uk-matter-smart-plug-with-energy-monitoring-any-good/273421/1): > > > [@h0ckeysk8er](#): > > > > Account linking would make the device use cloud-\>cloud integration vs a local Matter integration. Not sure the person you talked to is entirely clued in on how this should work. > > ![Screenshot_20250106_203420_Samsung Internet](https://global.discourse-cdn.com/smartthings/original/3X/6/5/654d56ab5f44d778e8992ede188d68b1bebebf55.png) > > > [@Tapo P110M (UK) Matter Smart Plug with energy monitoring, Any good?](https://community.smartthings.com/t/tapo-p110m-uk-matter-smart-plug-with-energy-monitoring-any-good/273421/1): > > > > With Smartthings if you want energy monitoring in the Smartthings energy app then you must connect your plugs to the Tapo app and then use the Tapo to Smartthings cloud to cloud service. Right, which means you can’t use Matter for local integration AND get energy monitoring. It’s one or the other right now until Tapo updates the firmware to support Matter 1.3. ---
**Author:** ![imcdona](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/imcdona/32/86741_2.png) [@imcdona](https://community.smartthings.com/u/imcdona)\ **Post date:** [January 15, 2025, 2:54pm UTC](https://community.smartthings.com/t/kp125m-no-energy-monitoring-data/290304/9 "2025-01-15T14:54:10Z")
TP-Link applied the fix for energy monitoring on their cloud integration. Energy stats are now being reported on KP125M devices. 😀