# ISO battery powered switch

**URL:** <https://community.smartthings.com/t/iso-battery-powered-switch/32885>\
**Category:** Devices & Integrations\
**Created:** [December 21, 2015, 2:48pm UTC](https://community.smartthings.com/t/iso-battery-powered-switch/32885 "2015-12-21T14:48:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![fstbusa](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@fstbusa](https://community.smartthings.com/u/fstbusa)\
**Post date:** [December 21, 2015, 2:48pm UTC](https://community.smartthings.com/t/iso-battery-powered-switch/32885/1 "2015-12-21T14:48:34Z")

</div>

I recently installed a GE Link bulb in my wife’s lamp beside her bed. I’ve automated it to gradually increase the light level for a gradual wake up and I think she likes it. What she doesn’t like is having to turn off her lamp with her phone.

Other than using a minimote, is there a small battery powered switch that could be used to turn off her lamp? I would prefer it to be just a single button but I’m sure nothing like that exists.

I across this device but from reading the thread below it sounds like Iris uses its own zigbee standard.  
[http://www.lowes.com/pd\_388563-41166-BTN900\_0\_\_?productId=3735313](http://www.lowes.com/pd_388563-41166-BTN900_0__?productId=3735313)

> [@Single Push Button Battery Operated Switch](https://community.smartthings.com/t/single-push-button-battery-operated-switch/6170/2):
>
> There is one at Lowes for their Iris system. I don’t know if it will work with ST, though. Not sure if it is zwave/zigbee or something else. I think it has been mentioned on the forums here, though.

Also found the aeotec panic button but its rather pricey.  
[http://www.amazon.com/Aeon-Labs-Panic-Button-Z-Wave/dp/B00D3CUAMA](http://www.amazon.com/Aeon-Labs-Panic-Button-Z-Wave/dp/B00D3CUAMA)  
Thanks for any help.

---

<div class="post-metadata">

**Author:** ![diehllane](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/diehllane/32/22571_2.png) [@diehllane](https://community.smartthings.com/u/diehllane)\
**Post date:** [December 21, 2015, 11:16pm UTC](https://community.smartthings.com/t/iso-battery-powered-switch/32885/2 "2015-12-21T23:16:56Z")

</div>

You can check over in this thread which has discussed options previously:

> [@FAQ: Full list of buttons and remotes confirmed to work with SmartThings \[Not all devices listed work with the 2020 Platform\]](https://community.smartthings.com/t/faq-full-list-of-buttons-and-remotes-supported-by-smartthings-at-this-time/9729):
>
> I’d like to know which buttons and remotes are currently supported or might be supported in the future. Ideally, I’d like to find something similar to the following: [http://www.evolvecontrols.com/devices/control-devices/glass-series](http://www.evolvecontrols.com/devices/control-devices/glass-series) Though alternatively just a simple nice-looking button which actually works unlike this Aeon according to Amazon reviews: [http://www.amazon.com/Touch-Panel-Button-Switch-AL-001/dp/B00GL6B4GG/ref=sr\_1\_3?s=hi&ie=UTF8&qid=1421468320&sr=1-3&keywords=aeon+button](http://www.amazon.com/Touch-Panel-Button-Switch-AL-001/dp/B00GL6B4GG/ref=sr_1_3?s=hi&ie=UTF8&qid=1421468320&sr=1-3&keywords=aeon+button) There is an Aeon Key Fob as well, but it doesn’t seem to be very durable or stylish: What else is available?