# Is there any way a mere mortal can get several existing Enerwave ZWN-RSM2 s to work? **URL:** \ **Category:** Devices & Integrations\ **Created:** [August 17, 2023, 10:47pm UTC](https://community.smartthings.com/t/is-there-any-way-a-mere-mortal-can-get-several-existing-enerwave-zwn-rsm2-s-to-work/268541 "2023-08-17T22:47:22Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![peter132](https://avatars.discourse-cdn.com/v4/letter/p/58956e/32.png) [@peter132](https://community.smartthings.com/u/peter132)\ **Post date:** [August 17, 2023, 10:47pm UTC](https://community.smartthings.com/t/is-there-any-way-a-mere-mortal-can-get-several-existing-enerwave-zwn-rsm2-s-to-work/268541/1 "2023-08-17T22:47:22Z")
The title says it all. I have three of Enerwave ZWN-RSM2 s controlling three ceiling fan/lights. Is there any way a mortal can get them working again? Yes, I have searched several times over the last few months hoping each time the recent mentions of it will make more sense, but I am unable to decipher what is being said. At the moment they each act as one switch only, which happen to be the light. I have no control over the fan. ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [August 17, 2023, 11:02pm UTC](https://community.smartthings.com/t/is-there-any-way-a-mere-mortal-can-get-several-existing-enerwave-zwn-rsm2-s-to-work/268541/2 "2023-08-17T23:02:09Z")
A quick search found this. > [@\[OBSOLETE\] Enerwave ZWN-RSM2 (v1 & v2) & RSM2-Plus —Smart Dual Relay Switch Module](https://community.smartthings.com/t/obsolete-enerwave-zwn-rsm2-v1-v2-rsm2-plus-smart-dual-relay-switch-module/44256/163): > > Just got this to work. Here’s what I did: Installed the Z-Wave Switch and Child Mc Driver from here Added the device by selecting the zooz zen 52 double relay in the SmartThings app. It showed up as a enerwave dual relay. In the settings I was able to toggle “create single device for switch one” and I now have individual control of both switches. I was actually trying to add it as a zooz double relay, as some people seem to have done successfully. I had added both the zooz as well as the driver linked There may be other ways to add the device, but this worked for me. ---
**Author:** ![peter132](https://avatars.discourse-cdn.com/v4/letter/p/58956e/32.png) [@peter132](https://community.smartthings.com/u/peter132)\ **Post date:** [August 18, 2023, 1:36am UTC](https://community.smartthings.com/t/is-there-any-way-a-mere-mortal-can-get-several-existing-enerwave-zwn-rsm2-s-to-work/268541/3 "2023-08-18T01:36:47Z")
I did find this, but do not understand what they are saying. “Installed the Z-Wave Switch and Child Mc Driver”. When I try to change the “driver” to this pulldown option it reports an error trying to change it and asks me to check for a valid fingerprint. So I understand the error part, but that’s it. Besides that, I thought the [OBSOLETE] meant that this post’s contents no longer work. Which is what I found when I tried. ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [August 18, 2023, 1:50am UTC](https://community.smartthings.com/t/is-there-any-way-a-mere-mortal-can-get-several-existing-enerwave-zwn-rsm2-s-to-work/268541/4 "2023-08-18T01:50:52Z")
The [OBSOLETE] means the older parts of the post related to Device Handlers are out of date. In this case the newer parts related to Edge Drivers are still valid. It sounds your devices fingerprints are not in the driver. You could post your fingerprints (Mfg. Code and Model) and ask the developer @Mariano_Colmenarejo to add them if they are compatible. You can get the fingerprints at [Samsung account](http://my.smartthings.com/advanced).