# Instruction and Device Handler for SmartThings Hub controlling Nue ZigBee In-Ceiling Light Controller

**URL:** <https://community.smartthings.com/t/instruction-and-device-handler-for-smartthings-hub-controlling-nue-zigbee-in-ceiling-light-controller/127109>\
**Category:** Community Created Drivers\
**Created:** [May 24, 2018, 11:18am UTC](https://community.smartthings.com/t/instruction-and-device-handler-for-smartthings-hub-controlling-nue-zigbee-in-ceiling-light-controller/127109 "2018-05-24T11:18:11Z")\
**Posts on this page:** 1\
**Showing post:** 25

<div class="post-metadata">

**Author:** ![Ryan780](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ryan780/32/103505_2.png) [@Ryan780](https://community.smartthings.com/u/Ryan780)\
**Post date:** [October 23, 2018, 12:52am UTC](https://community.smartthings.com/t/instruction-and-device-handler-for-smartthings-hub-controlling-nue-zigbee-in-ceiling-light-controller/127109/25 "2018-10-23T00:52:41Z")

</div>

> [@davetech](#):
>
> My hub is a 3.0

What do you mean? Do you mean a v3 hub? that’s the SmartThings version, not your zigbee protocol version that it runs. ZLL stands for Zigbee Light Link. The other option would be ZHA or Zigbee Home Automation. SmartThings uses ZHA but ZHA does everything ZHA can do, it just assumes there will be a hub. There’s a good writeup on the differences here:

> [@Zigbee HA vs. Zigbee LL](https://community.smartthings.com/t/zigbee-ha-vs-zigbee-ll/10298):
>
> I’m trying to wrap my head around the difference between the two flavors of zigbee that I see routinely discussed in the community(Home Automation and Light Link). From what I’ve read: The two have different sets of clusters Light link devices can talk HA but only on certain channels common to both. The questions I have are: Would ST need a new radio to natively work with LL? Are LL and HA two separate protocols or just two separate application types? Could both coexist on the same network? Are the limitations that cripple native support for Hue bulbs because of this incompatibility or because of functions that haven’t yet been implemented by ST. The web seems to not have very much information on this and I would like to understand the issues involved with making ST LL capable.

There is no v3 of Zigbee. that’s the version of hub you have.

---

_[View the full topic](https://community.smartthings.com/t/instruction-and-device-handler-for-smartthings-hub-controlling-nue-zigbee-in-ceiling-light-controller/127109)._
