# Hub Firmware Release Notes - 19.17 **URL:** \ **Category:** Hub Firmware Release Notes\ **Created:** [November 14, 2017, 9:39pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345 "2017-11-14T21:39:12Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![tpmanley](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/tpmanley/32/19994_2.png) [@tpmanley](https://community.smartthings.com/u/tpmanley)\ **Post date:** [November 14, 2017, 9:39pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/1 "2017-11-14T21:39:13Z")
On Thursday, November 16, we will automatically update your SmartThings Hub V2 to the latest firmware (version 0.19.17). Your Hub will briefly go offline as it reboots and applies the update; most customers will experience less than one minute of downtime. **Release notes:** Add support for local execution of the following Device Type Handlers: - LAN Hue Bridge - LAN Hue Extended Color - LAN Hue Color - LAN Hue Color Temperature - LAN Hue Dimmable - ZigBee Switch - ZigBee Switch Power - ZigBee Dimmer - ZigBee Dimmer Power - ZigBee White Color Temperature Bulb - ZigBee RGBW Bulb - ZigBee RGB Bulb - Z-Wave Switch Generic - Z-Wave Dimmer Switch Generic - _Note: The Cree Bulb DTH may be runnable locally in the future_ Add support for color and color temperature control in local automations created by Smart Lighting and Alert With Lights. Allow a temperature offset range of -99° to 99° for locally running devices. Track IP changes for LAN devices on the hub. Bug fixes and performance improvements for Z-Wave. Bug fixes for potential connection issues in large Z-Wave networks. Firmware updates for most recent Samsung SmartThings Sensors which address the following: - Multi: No contact events are generated when there are lots of acceleration events - All: Factory reset is not clearing all data ---
**Author:** ![JungleJeff](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/junglejeff/32/69004_2.png) [@JungleJeff](https://community.smartthings.com/u/JungleJeff)\ **Post date:** [November 14, 2017, 9:42pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/2 "2017-11-14T21:42:59Z")
Where do i check to make sure firmware was updated? ---
**Author:** ![bobbles](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/bobbles/32/76290_2.png) [@bobbles](https://community.smartthings.com/u/bobbles)\ **Post date:** [November 14, 2017, 9:43pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/3 "2017-11-14T21:43:36Z")
Hi @tpmanley Is this a phased release gradually across the shards? I assume we will get an email as per normal with the upgrade times. Also 0.19? This seems to be going away from the existing numbering. Thanks. ---
**Author:** ![doug-st](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/doug-st/32/11697_2.png) [@doug-st](https://community.smartthings.com/u/doug-st)\ **Post date:** [November 14, 2017, 9:51pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/4 "2017-11-14T21:51:37Z")
Options: 1. see it in [graph.api.smartthings.com](http://graph.api.smartthings.com) if you log in to you account, under your hub details 2. see it in your mobile application if you tap on the ‘Hub is Online’ banner when you are in the ‘More’ view. ---
**Author:** ![WB70](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/wb70/32/95668_2.png) [@WB70](https://community.smartthings.com/u/WB70)\ **Post date:** [November 14, 2017, 9:58pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/5 "2017-11-14T21:58:08Z")
> [@tpmanley](#): > > Allow a temperature offset range of -99° to 99° for locally running devices. Can you give a more detailed explanation of what this means versus the assumption that’s in my head with regards to displaying temperature on devices? ---
**Author:** ![JungleJeff](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/junglejeff/32/69004_2.png) [@JungleJeff](https://community.smartthings.com/u/JungleJeff)\ **Post date:** [November 14, 2017, 10:03pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/6 "2017-11-14T22:03:11Z")
Thanks for the Answer Doug. I see it in my Mobile App but not in [graph.api.smartthings.com](http://graph.api.smartthings.com). Is there a way to add my hub to [graph.api.smartthings.com](http://graph.api.smartthings.com)? ---
**Author:** ![Gogorichie](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/gogorichie/32/62991_2.png) [@Gogorichie](https://community.smartthings.com/u/Gogorichie)\ **Post date:** [November 14, 2017, 10:05pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/7 "2017-11-14T22:05:22Z")
Super exciting stuff !!! ---
**Author:** ![Automated\_House](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/automated_house/32/99641_2.png) [@Automated\_House](https://community.smartthings.com/u/Automated_House)\ **Post date:** [November 14, 2017, 10:06pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/8 "2017-11-14T22:06:40Z")
> [@JungleJeff](#): > > Is there a way to add my hub to [graph.api.smartthings.com](http://graph.api.smartthings.com)? probably on the wrong shard. use [account.smartthings.com](http://account.smartthings.com) instead ---
**Author:** ![bobbles](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/bobbles/32/76290_2.png) [@bobbles](https://community.smartthings.com/u/bobbles)\ **Post date:** [November 14, 2017, 10:07pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/9 "2017-11-14T22:07:21Z")
That address may be incorrect depending on what shard you are on. When that link opens, choose locations then Home. It should now take you to your hub. Look in the address bar for your shard address and save it to your favourites for future reference. ---
**Author:** ![tpmanley](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/tpmanley/32/19994_2.png) [@tpmanley](https://community.smartthings.com/u/tpmanley)\ **Post date:** [November 14, 2017, 10:09pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/10 "2017-11-14T22:09:44Z")
> [@bobbles](#): > > Is this a phased release gradually across the shards? > > I assume we will get an email as per normal with the upgrade times. The email will be going out shortly. We’ll be rolling the release out to all shards throughout the day. > [@bobbles](#): > > Also 0.19? This seems to be going away from the existing numbering. I updated the title to be consistent with previous release notes. The version is actually 000.019.00017 but we frequently abbreviate it in different ways like 0.19, 19.17, 19.X, etc… We like to keep it confusing interesting. > [@WB70](#): > > Can you give a more detailed explanation of what this means versus the assumption that’s in my head with regards to displaying temperature on devices? Some device type handlers like the SmartSense Multi Sensor allow you to configure a temperature offset if the temperature value reported by the device is a little bit off. The device type handler doesn’t enforce a range for that offset but the 0.18.22 hub firmware only allowed an offset of as low as -9°. Some people had larger negative offsets which weren’t supported in that hub firmware. ---
**Author:** ![bobbles](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/bobbles/32/76290_2.png) [@bobbles](https://community.smartthings.com/u/bobbles)\ **Post date:** [November 14, 2017, 10:11pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/11 "2017-11-14T22:11:26Z")
Thanks @tpmanley for the clarification. ---
**Author:** ![23dash](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/23dash/32/60043_2.png) [@23dash](https://community.smartthings.com/u/23dash)\ **Post date:** [November 14, 2017, 10:17pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/12 "2017-11-14T22:17:22Z")
Thanks Tom for the heads up on this release. What chance of the Aeotec multi sensor 6 being able to run locally in the near future? Will battery status in sensors be more reliable in this release? Dave ---
**Author:** ![mwiseman](https://avatars.discourse-cdn.com/v4/letter/m/50afbb/32.png) [@mwiseman](https://community.smartthings.com/u/mwiseman)\ **Post date:** [November 14, 2017, 10:23pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/13 "2017-11-14T22:23:36Z")
Wow, the ST folks have been busy! ---
**Author:** ![WB70](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/wb70/32/95668_2.png) [@WB70](https://community.smartthings.com/u/WB70)\ **Post date:** [November 14, 2017, 10:30pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/14 "2017-11-14T22:30:44Z")
> [@mwiseman](#): > > Wow, the ST folks have been busy! 😂 I told Robin earlier that I haven’t seen so much activity from the community in a single day unless it was for some major issue affecting SmartThings. ---
**Author:** ![Automated\_House](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/automated_house/32/99641_2.png) [@Automated\_House](https://community.smartthings.com/u/Automated_House)\ **Post date:** [November 14, 2017, 10:33pm UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/15 "2017-11-14T22:33:53Z")
it seems now that the fancy new cloud is setup, we get fun stuff! Although, that’s probably different resources. ---
**Author:** ![kebel871](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/kebel871/32/64155_2.png) [@kebel871](https://community.smartthings.com/u/kebel871)\ **Post date:** [November 15, 2017, 1:04am UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/16 "2017-11-15T01:04:30Z")
Thanks for your hard work! Please, pretty please, don’t kill our Xiaomi devices this time 😕 ---
**Author:** ![Dallas](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dallas/32/71311_2.png) [@Dallas](https://community.smartthings.com/u/Dallas)\ **Post date:** [November 15, 2017, 1:58am UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/17 "2017-11-15T01:58:30Z")
Does this also impact the new ADT Hub? ---
**Author:** ![Automated\_House](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/automated_house/32/99641_2.png) [@Automated\_House](https://community.smartthings.com/u/Automated_House)\ **Post date:** [November 15, 2017, 2:39am UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/18 "2017-11-15T02:39:48Z")
Mine have stayed working on the beta. I think I’ve added some Aqara water sensors while on it, too. ---
**Author:** ![Rxich](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/rxich/32/95418_2.png) [@Rxich](https://community.smartthings.com/u/Rxich)\ **Post date:** [November 15, 2017, 3:26am UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/19 "2017-11-15T03:26:19Z")
Kinda newbie here, by beta you mean your published DH or some beta ST hub firmware? As I said in another thread my aquara moisture sensor is eatin batteries like mad, at 1% for almost 3 days ---
**Author:** ![Mario\_M](https://avatars.discourse-cdn.com/v4/letter/m/d9b06d/32.png) [@Mario\_M](https://community.smartthings.com/u/Mario_M)\ **Post date:** [November 15, 2017, 3:35am UTC](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345/20 "2017-11-15T03:35:06Z")
I hope it fixes the issue whereas the Echo has no clue what’s going on and randomly thinks device doesn’t exist. (But works fine in ST.) [Next page](https://community.smartthings.com/t/hub-firmware-release-notes-19-17/105345.md?page=2)