# Hub Firmware Beta 0.25.24 **URL:** \ **Category:** Hub Firmware Beta\ **Created:** [March 18, 2019, 4:19pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022 "2019-03-18T16:19:50Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![cbaumler](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/cbaumler/32/83233_2.png) [@cbaumler](https://community.smartthings.com/u/cbaumler)\ **Post date:** [March 18, 2019, 4:19pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/1 "2019-03-18T16:19:50Z")
For those who are part of the 0.25.x beta test, we are releasing new firmware: Version - 0.25.24 Hub Targets - Samsung SmartThings Hub (Hub v2) - Samsung SmartThings Hub (Hub v3) (2018) Release Date - 3/18/2019 Release Notes - Fix issue with Wi-Fi onboarding - Fix issue with Z-Wave network repair cancel command getting ignored ---
**Author:** ![professordave](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/professordave/32/102521_2.png) [@professordave](https://community.smartthings.com/u/professordave)\ **Post date:** [March 18, 2019, 4:30pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/2 "2019-03-18T16:30:23Z")
Thanks, what are the symptoms of cancel being ignored? How would I test this? ---
**Author:** ![jjslegacy](https://avatars.discourse-cdn.com/v4/letter/j/8491ac/32.png) [@jjslegacy](https://community.smartthings.com/u/jjslegacy)\ **Post date:** [March 18, 2019, 4:44pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/3 "2019-03-18T16:44:00Z")
What is the best way to get out of the beta program? I have some apps that some manual intervention everytime there is a reboot and it’s finally getting to the point of being annoying to me 🙂 Thanks! ---
**Author:** ![cbaumler](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/cbaumler/32/83233_2.png) [@cbaumler](https://community.smartthings.com/u/cbaumler)\ **Post date:** [March 18, 2019, 4:56pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/4 "2019-03-18T16:56:38Z")
You can leave the program via the [Account Settings](https://smartthings.centercode.com/user/general.html) menu item in [Centercode](https://smartthings.centercode.com/). Note that since we’re in the middle of a beta, this isn’t the same as opting out prior to a new beta. We can’t roll your firmware back to 0.24.x. However, we can make a note to no longer send beta firmware updates to your hub. You will stay on 0.25.22 until the 0.25.x firmware is released to production. Is that what you’d like? ---
**Author:** ![jjslegacy](https://avatars.discourse-cdn.com/v4/letter/j/8491ac/32.png) [@jjslegacy](https://community.smartthings.com/u/jjslegacy)\ **Post date:** [March 18, 2019, 5:22pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/5 "2019-03-18T17:22:08Z")
Yes no rollback needed at all. I just have been having some pain points on some outside integration every time the hub gets rebooted. Also what did I click exactly? Is it “Remove Your User Account” or do I need I need to remove the platform? ---
**Author:** ![cbaumler](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/cbaumler/32/83233_2.png) [@cbaumler](https://community.smartthings.com/u/cbaumler)\ **Post date:** [March 18, 2019, 5:58pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/6 "2019-03-18T17:58:44Z")
I’ve made a note not to send you further firmware updates for 25.x. So if that’s all you wanted, then you don’t need to take any further action. If you no longer wish to participate in future beta tests, then you should click “Remove Your User Account”. ---
**Author:** ![jjslegacy](https://avatars.discourse-cdn.com/v4/letter/j/8491ac/32.png) [@jjslegacy](https://community.smartthings.com/u/jjslegacy)\ **Post date:** [March 18, 2019, 6:09pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/7 "2019-03-18T18:09:21Z")
Awesome thanks! Maybe someday I will figure out how to fix this integration mess 🙂 ---
**Author:** ![cbaumler](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/cbaumler/32/83233_2.png) [@cbaumler](https://community.smartthings.com/u/cbaumler)\ **Post date:** [March 18, 2019, 6:15pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/8 "2019-03-18T18:15:45Z")
> [@professordave](#): > > Thanks, what are the symptoms of cancel being ignored? > > How would I test this? If you initiate a network repair from the classic app, and then you hit the “back” button, the repair should be canceled. You can determine that it was in fact canceled by verifying that your nodes are communicating again and that network repair related messages are no longer appearing in your hub event log in graph. ---
**Author:** ![RLDreams](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/rldreams/32/18109_2.png) [@RLDreams](https://community.smartthings.com/u/RLDreams)\ **Post date:** [March 18, 2019, 9:02pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/9 "2019-03-18T21:02:39Z")
“Fix WiFi Onboarding” is this why my LifX bulbs are showing as offline in the ST app but still responding to ST automations and app commands? ---
**Author:** ![jkp](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jkp/32/117130_2.png) [@jkp](https://community.smartthings.com/u/jkp)\ **Post date:** [March 18, 2019, 11:19pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/10 "2019-03-18T23:19:01Z")
anyone receive 25.24 yet? ---
**Author:** ![Automated\_House](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/automated_house/32/99641_2.png) [@Automated\_House](https://community.smartthings.com/u/Automated_House)\ **Post date:** [March 18, 2019, 11:20pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/11 "2019-03-18T23:20:05Z")
Not yet. … ---
**Author:** ![johnconstantelo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/johnconstantelo/32/111869_2.png) [@johnconstantelo](https://community.smartthings.com/u/johnconstantelo)\ **Post date:** [March 18, 2019, 11:27pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/12 "2019-03-18T23:27:32Z")
I looks like it tried but I’m still on 25.22? @cbaumler? ![image](https://global.discourse-cdn.com/smartthings/original/3X/4/0/40960b94abd86b0504a4067486547df7a6ceeccc.png) ---
**Author:** ![vseven](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/vseven/32/35333_2.png) [@vseven](https://community.smartthings.com/u/vseven)\ **Post date:** [March 19, 2019, 12:16am UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/13 "2019-03-19T00:16:38Z")
> [@RLDreams](#): > > “Fix WiFi Onboarding” is this why my LifX bulbs are showing as offline in the ST app but still responding to ST automations and app commands? I was hoping it has something to do with actually being able to change the Wi-Fi settings on the 2018 hub. It doesn’t seem to appear to work and nobody has an answer other than to hard reset the hub. @cbaumler - what exactly is “fix Wi-Fi onboarding” and if it’s not to be able to change the Wi-Fi settings will that ever be fixed? > [@How to Update Smartthings Hub (2018) Wifi Settings?](https://community.smartthings.com/t/how-to-update-smartthings-hub-2018-wifi-settings/139526/65): > > I’m dying over here. I’m on with phone support right now and they’re not understanding and still think this cannot be done on a v3 standalone hub. Am I the only one in the world with a need to move his v3 hub to a new wifi network and not hard reset it?!?! Patrick any assistance you can provide would be awesome. I’m just getting nowhere with support. ---
**Author:** ![cbaumler](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/cbaumler/32/83233_2.png) [@cbaumler](https://community.smartthings.com/u/cbaumler)\ **Post date:** [March 19, 2019, 1:09am UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/14 "2019-03-19T01:09:09Z")
Firmware 0.25.24 will be released shortly. ---
**Author:** ![cbaumler](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/cbaumler/32/83233_2.png) [@cbaumler](https://community.smartthings.com/u/cbaumler)\ **Post date:** [March 19, 2019, 1:37am UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/15 "2019-03-19T01:37:34Z")
The Wi-Fi onboarding fix was a change made to prevent the firmware from crashing during heavy loads. @RLDreams The change should be unrelated to your LifX bulbs. @vseven I would suggest you ask your question regarding Wifi Settings in the forum thread you linked. The ST Staff active in that thread would have a better answer than I would. ---
**Author:** ![vseven](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/vseven/32/35333_2.png) [@vseven](https://community.smartthings.com/u/vseven)\ **Post date:** [March 19, 2019, 1:40am UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/16 "2019-03-19T01:40:55Z")
Unfortunately no one has a answer in that thread and the staff has stopped responding. And the “official” instructions don’t work nor does tech support know how to make it work, if you read that thread you’ll see that. Oh well. ---
**Author:** ![leonardo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/leonardo/32/100948_2.png) [@leonardo](https://community.smartthings.com/u/leonardo)\ **Post date:** [March 19, 2019, 2:37pm UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/17 "2019-03-19T14:37:41Z")
Brad has chimed in over there and is going to take a look at my logs tonight - FYI. I would start following so that you can stay updated if my situation improves. I can tell you that phone support told me the reason that “Update Wifi settings” was grayed out in the new app is that it is only meant to update wifi settings for devices/appliances that connect to the network. Why on earth it doesn’t apply to the actual smartthings hub is beyond me. They told me my only options was a hard reset. I said no thanks as I have about a hundred devices and 20 smartapps and no interest in redoing it all… I’ll leave it plugged in with ethernet for now. I’ve been with smartthings for 3 years now and love so much about it but they’re kind of getting one upped these days by decent and fresh products. Hubitat to name one. Please ST, don’t let us down! ---
**Author:** ![aruffell](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/aruffell/32/42775_2.png) [@aruffell](https://community.smartthings.com/u/aruffell)\ **Post date:** [March 20, 2019, 1:22am UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/18 "2019-03-20T01:22:50Z")
I have lost count of the network repairs I have run… and the errors never go away. Volume goes up and down without any apparent pattern. Am I the only one? ![image](https://global.discourse-cdn.com/smartthings/original/3X/f/7/f798612411179b2028314bd5a8ccc9a8825a3ae8.png) Things seem to be working but those errors bug me ☠ ---
**Author:** ![HA\_fanatic](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ha_fanatic/32/93722_2.png) [@HA\_fanatic](https://community.smartthings.com/u/HA_fanatic)\ **Post date:** [March 20, 2019, 11:04am UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/19 "2019-03-20T11:04:36Z")
> [@aruffell](#): > > Things seem to be working but those errors bug me What actions are you taking to resolve these errors? Running the repair over and over again and expecting a different result is not going to solve your problem. Your hub sends commands to these devices and they don’t respond. Knowing why, would solve your problem. ---
**Author:** ![professordave](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/professordave/32/102521_2.png) [@professordave](https://community.smartthings.com/u/professordave)\ **Post date:** [March 20, 2019, 11:40am UTC](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022/20 "2019-03-20T11:40:26Z")
@aruffell I recently had an issue with one in wall dimmer that was causing all devices to fail network repair. I turned the breaker on and off for the room that the in-wall dimmer was in and then the repair worked without any errors. Not sure how to find out which device was causing the problem. [Next page](https://community.smartthings.com/t/hub-firmware-beta-0-25-24/158022.md?page=2)