# Hub Firmware and Edge Driver Release Notes - 0.62.7 **URL:** \ **Category:** Hub Firmware Release Notes\ **Tags:** hub\_firmware\_update\ **Created:** [September 4, 2026, 7:42pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908 "2026-09-04T19:42:33Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![Automated\_House](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/automated_house/32/99641_2.png) [@Automated\_House](https://community.smartthings.com/u/Automated_House)\ **Post date:** [September 8, 2026, 3:56pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/21 "2026-09-08T15:56:06Z")
How does the local mobile app\<-\>hub control still work if the hub is offline? I assume it works over LAN, but if it works offline is it via Bluetooth instead? Or does “offline” mean online to your LAN but offline to the cloud? ---
**Author:** ![Andreas\_Roedl](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/andreas_roedl/32/209616_2.png) [@Andreas\_Roedl](https://community.smartthings.com/u/Andreas_Roedl)\ **Post date:** [September 8, 2026, 4:02pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/22 "2026-09-08T16:02:21Z")
> [@Automated\_House](#): > > Or does “offline” mean online to your LAN but offline to the cloud? This. It’s a LAN connection. > [@SmartThings](#): > > - The SmartThings app can now communicate directly with SmartThings Hubs when the app and Hub are connected to the same local network, even when the Hub is offline. ---
**Author:** ![Declankh](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/declankh/32/153620_2.png) [@Declankh](https://community.smartthings.com/u/Declankh)\ **Post date:** [September 10, 2026, 4:13pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/23 "2026-09-10T16:13:22Z")
62.7 has just landed on my hub. Im currently away from home for a few hours but 5 devices haven’t come back online yet. Will see if they come back before I return ---
**Author:** ![Michal\_Ociepa](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/michal_ociepa/32/190995_2.png) [@Michal\_Ociepa](https://community.smartthings.com/u/Michal_Ociepa)\ **Post date:** [September 10, 2026, 7:25pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/24 "2026-09-10T19:25:38Z")
Is it known when the new version of the SmartThings app that supports local connection will be released? ---
**Author:** ![Andreas\_Roedl](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/andreas_roedl/32/209616_2.png) [@Andreas\_Roedl](https://community.smartthings.com/u/Andreas_Roedl)\ **Post date:** [September 10, 2026, 8:12pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/25 "2026-09-10T20:12:38Z")
> [@Michal\_Ociepa](#): > > Is it known when the new version of the SmartThings app that supports local connection will be released? Can’t answer that question. ---
**Author:** ![orangebucket](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/orangebucket/32/81590_2.png) [@orangebucket](https://community.smartthings.com/u/orangebucket)\ **Post date:** [September 10, 2026, 9:02pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/26 "2026-09-10T21:02:20Z")
> [@](#): > > Is it known when the new version of the SmartThings app that supports local connection will be released? The relatively interesting stuff, rather than bug fixes, normally comes out quarterly so it is likely that it is intended to be released this month. I think we’ve seen it appear at various times of the month and well into the next one. That’s as firm a prediction as I would make. ---
**Author:** ![Sean\_Williams](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/sean_williams/32/157230_2.png) [@Sean\_Williams](https://community.smartthings.com/u/Sean_Williams)\ **Post date:** [September 10, 2026, 11:09pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/27 "2026-09-10T23:09:14Z")
Is anyone having issues with Virtual Switches (created through the Smartthings Labs) going offline and not coming back online? This only happened last night/today after the firmware update. I registered them on the hub when I initially created them. ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [September 10, 2026, 11:33pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/28 "2026-09-10T23:33:16Z")
I tested a couple virtual switches created in Labs and they seen to be working fine. I have a v2 hub with firmware 62.07. ---
**Author:** ![Sean\_Williams](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/sean_williams/32/157230_2.png) [@Sean\_Williams](https://community.smartthings.com/u/Sean_Williams)\ **Post date:** [September 11, 2026, 12:54am UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/29 "2026-09-11T00:54:18Z")
I can recreate or add new virtual switches in 62.07, the existing ones I had before the upgrade are now offline and won’t come back online. Is that the same scenario you tested? ---
**Author:** ![JohnRichard](https://avatars.discourse-cdn.com/v4/letter/j/ad7895/32.png) [@JohnRichard](https://community.smartthings.com/u/JohnRichard)\ **Post date:** [September 11, 2026, 1:14am UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/30 "2026-09-11T01:14:04Z")
Have you tried Power Cycling the hub? ---
**Author:** ![Declankh](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/declankh/32/153620_2.png) [@Declankh](https://community.smartthings.com/u/Declankh)\ **Post date:** [September 11, 2026, 1:16am UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/31 "2026-09-11T01:16:06Z")
> [@Declankh](#): > > 62.7 has just landed on my hub. Im currently away from home for a few hours but 5 devices haven’t come back online yet. Will see if they come back before I return All but two came back eventually, the two left were both thread devices which needed power cycles and manual coercion to bring them online A klippbok water leak sensor behind my fridge which is a pain to get to and a lafaer presence sensor. ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [September 11, 2026, 1:38am UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/32 "2026-09-11T01:38:16Z")
My virtual switches are couple years old and were created with labs. I looked to see if they were online and they were and I was able to operate them. As @JohnRichard said try rebooting your hub. If that doesn’t work create new ones and use the Update Routine function to swap them with the old switches. It is located under the 3 dots in top right corner of the routines page. ---
**Author:** ![Sean\_Williams](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/sean_williams/32/157230_2.png) [@Sean\_Williams](https://community.smartthings.com/u/Sean_Williams)\ **Post date:** [September 11, 2026, 11:30pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/33 "2026-09-11T23:30:00Z")
Thanks for checking. I had power cycled the hub and no luck. I had to recreate the switches after the last update, ended up doing it again, and was hoping to avoid it this time. ---
**Author:** ![Nezmo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/nezmo/32/63953_2.png) [@Nezmo](https://community.smartthings.com/u/Nezmo)\ **Post date:** [September 12, 2026, 12:43am UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/34 "2026-09-12T00:43:09Z")
TLTL. But good try. ---
**Author:** ![Declankh](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/declankh/32/153620_2.png) [@Declankh](https://community.smartthings.com/u/Declankh)\ **Post date:** [September 12, 2026, 1:22am UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/35 "2026-09-12T01:22:49Z")
> [@Nezmo](#): > > TLTL. But good try. Too long, too long ??. ---
**Author:** ![jkp](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jkp/32/117130_2.png) [@jkp](https://community.smartthings.com/u/jkp)\ **Post date:** [September 12, 2026, 1:25am UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/36 "2026-09-12T01:25:56Z")
You got the “too” right ---
**Author:** ![Nezmo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/nezmo/32/63953_2.png) [@Nezmo](https://community.smartthings.com/u/Nezmo)\ **Post date:** [September 12, 2026, 1:57am UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/37 "2026-09-12T01:57:55Z")
LOL. ‘Too little too late.’ Just speaking for myself. After ten years on SmartThings, my divorce is close to decree nisi. I just need to work on migrating my appliances. ---
**Author:** ![Huib\_o](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/huib_o/32/117381_2.png) [@Huib\_o](https://community.smartthings.com/u/Huib_o)\ **Post date:** [September 12, 2026, 8:01am UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/38 "2026-09-12T08:01:33Z")
I have one location (in Bucharest) where the 6,27 landend on both V2 and V3 (with all the Matter/Thread stuff) (Zigbee/Zwave stuff on V2 never ever gave me problems) My Matter stuff looked like a christmass tree with some Kajplats lamps going off and on. Nothing reacting any more on sensors or Birlesa’s. I had 5 (five) Ikea matter devices offline before 62.7 was installed and also after 62. stayed offline. But then: What do you know? I re-power booted the V3 and, quite fast everything came online and everything working etc. I even have the feeling that Mygspray sensors are working faster and also reacting on Bilresa is faster. But that could be just my personal idea. I am just a simple end user. I am leaving now for another location, in Romania, and am curious if the five/six Matter devices (Alpstuga/Timmerflotte/Klippbok) will come online just by repowering the V4 0.62.7hub. Edit. Nope. Power cycled the hub, but the 5 devices did not come to live automatically. The Klippbok only needed battery out and in, the alpsuga off and on, but the Timmerflotte’s needed the whole procedure to become online. Maybe keeping that small inside button somewhat longer pressed helped. Apropos. Its a building in the middle of nowhere in Romania. Internet is fiber, but the 4 Kajplats bulbs are sometimes flickering. Normal led bulbs don’t flicker here, so it could be the elecronics in the Kajplats ---
**Author:** ![COden6484](https://avatars.discourse-cdn.com/v4/letter/c/db5fbb/32.png) [@COden6484](https://community.smartthings.com/u/COden6484)\ **Post date:** [September 12, 2026, 12:32pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/39 "2026-09-12T12:32:29Z")
54 Matter/Thread devices that went offline and will not connect back to the v3 hub after power cycles, reboots, and just letting it sit for 2 days. Everything was rock solid before this firmware update. Now I have to rebuild and reconnect everything. Only a couple Zigbee and WiFi devices stayed connected to the hub. Really disappointed in Smartthings right now. ---
**Author:** ![JohnRichard](https://avatars.discourse-cdn.com/v4/letter/j/ad7895/32.png) [@JohnRichard](https://community.smartthings.com/u/JohnRichard)\ **Post date:** [September 12, 2026, 12:47pm UTC](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908/40 "2026-09-12T12:47:45Z")
Did you try Power-Cycling your Router, Access Points & Switches, and WiFi Devices {everything related to your Local LAN} as well as the SmartThings Hub? [Previous page](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908.md?page=1) [Next page](https://community.smartthings.com/t/hub-firmware-and-edge-driver-release-notes-0-62-7/310908.md?page=3)