I just installed a bunch of ge/jasco dimmer switched in my house and so far they work great but I have a questions… when i dim a light using smartthings and then later turn it off, if i press the wall switch to turn it back on, it turns back on to the dim level it was previously set to. I would ra…

[image] blairdee2000: if there is an easy setting in smartthings or something There is not.

thanks for the response. so just to clarify, without using webcore, there is no way to make the switches do this?

Correct. You are fighting the builtin functions of the switch. The only thing you can hope to do is wait for the switch=on event for each switch and set to 100% or if you have the 14xxx series Z-Wave Plus devices, do something like assigning on 100% to one of the double tap actions.

This is what I do in Webcore. I perform a Turn On and then set the level. I find a delay is not required. I also find with dimmers, you can skip the Turn On and go straight to set level. The last thing I do is I set my lights to level 100% and then Turn Off if the off function is driven by an Aw…

Thanks for the responses! So I do have the new 14 series zwave plus switches. How would I go about assigning something to the double tap? That would be perfect.

Because you were talking about the dimmer, read this thread… [image] [OBSOLETE] GE/Jasco Z-Wave Plus Dimmer Switch With Double-Tap Community Created Device Types Looking at mine I have an older model that is labeled as V3.0e on the back and a newer model that is labeled a…

I have some of my lights set to turn on at specified level during specified times. Before sunset is set to 90%. After sunset is set to 40%. Night Mode is set to 15%. I find it best to say: If light changes to On Then –If Time is between x and y (before sunset) And Level is not in the range of…

How to prevent jasco switched from resuming their dim level

General Discussion

nathancu (Nathan Curtis) January 29, 2018, 4:44am 7

Because you were talking about the dimmer, read this thread…

There’s a similar custom device handler for the switch too if you have some of those.

Topic		Replies	Views
Questions on GE/Jasco switches? Connected Things	8	1110	July 30, 2013
Looking for a modified device handler for GE14924 Devices & Integrations	7	1673	May 8, 2018
GE Smart Dimmer when turned on, default to full brightness SmartApps & Automations	25	5740	December 7, 2016
Dimmer control? SmartApps & Automations	6	2491	October 13, 2017
GE Dimmer Switches: Default to full brightness? Connected Things	20	9923	May 17, 2017

How to prevent jasco switched from resuming their dim level

Related topics