# Having trouble with virtual three way (tried using Big Switch)

**URL:** <https://community.smartthings.com/t/having-trouble-with-virtual-three-way-tried-using-big-switch/3567>\
**Category:** Connected Things\
**Created:** [July 20, 2014, 1:15am UTC](https://community.smartthings.com/t/having-trouble-with-virtual-three-way-tried-using-big-switch/3567 "2014-07-20T01:15:23Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![chevyman142000](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/chevyman142000/32/82729_2.png) [@chevyman142000](https://community.smartthings.com/u/chevyman142000)\
**Post date:** [July 21, 2014, 9:01pm UTC](https://community.smartthings.com/t/having-trouble-with-virtual-three-way-tried-using-big-switch/3567/5 "2014-07-21T21:01:05Z")

</div>

Also, these are the steps I used:

Associate Transmitter (LTM-5) with Switch/Module  
To create the three-way switching, do the following:  
Press the Button labeled “Associate” on the Minimote. The Blue LED should blink slowly  
On the switch/module to be controlled, double tap the set button. the LED will blink quickly to indicate proper Z-wave communication has occurred  
Double tap rocker on the Transmitter to finish the association. The Blue LED will stay on for 2 Seconds to indicate Success  
Repeat Step 3 for all additional auxiliary switches if multiple.  
Press Any button to exit Association Mode.

---

_[View the full topic](https://community.smartthings.com/t/having-trouble-with-virtual-three-way-tried-using-big-switch/3567)._