GE 3-Way Light

[dalec]

@LostinMumbosauce

I have all my Zwave devices connected to n IQ panel all my devices are run through there and alarm.comthe light in the picture in the left is the problem when I flick the switch on

Thanks for getting the pictures up but I can’t help you because nothing is identified. I mentioned that the better info you provide the better help can be provided and info is lacking so help will be lacking as well. I see at least four unidentified romex coming in and you are not indicating where they are coming from and from your pictures there is no way to see what is terminating to where on your switches. I am very familiar with GE switches and residential electrical wiring but you are not giving adequate info to see if you wired it correctly. But even then you also you say you are using IQ Panel and alarm.com and I am completely unaware of anything to do with those. Hopefully someone else can help you based on the info you’ve given.

The kind of info we need to help you correctly is like what you see here in this post

4 way switch help

It seems you just have it terminated wrong and should be easy to fix. The question is and this is very important to get you working, is what EXACTLY do you have at each of the boxes for your wiring? I think you might have made a slight mistake on reconnecting wires at Box 1. Here is one of the photos you posted that I marked up to help clarify our communication based on what you posted. Let me know if this is correct; We will refer to this box as B1 which is the primary (still hot when other boxes wires completely disconnected) and has 5 romex (labeled Rr, Rpi, Rpo, Rs, Rf) entering the box. Your romex has 3 wires and ground and we will reference them by romex label then color. For example Rs-red means the red conductor in romex Rs to 4-way switch. There are three switches in B1 that I h…