# Garage Door Automation while waiting for V2 **URL:** \ **Category:** Connected Things\ **Created:** [July 14, 2015, 5:19pm UTC](https://community.smartthings.com/t/garage-door-automation-while-waiting-for-v2/19161 "2015-07-14T17:19:30Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![chayes1126](https://avatars.discourse-cdn.com/v4/letter/c/ebca7d/32.png) [@chayes1126](https://community.smartthings.com/u/chayes1126)\ **Post date:** [July 14, 2015, 5:19pm UTC](https://community.smartthings.com/t/garage-door-automation-while-waiting-for-v2/19161/1 "2015-07-14T17:19:30Z")
Hi. I have finally decided to buy a SmartThings Hub after doing lots of research. I see that a version 2 HUB may be available soon so id like to wait for its release. However, I am in need of an automated garage door opener so I can be sure my garage door is closed. Long story short I left it open at night and now I am out a lawn mower and golf clubs. My question is, is there anything I can get now that will solve my garage door problem and be SmartThings compatible when version 2 is finally released? I don’t want to have to buy more than what is necessary if I know I’m getting the smart things hub soon. ---
**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\ **Post date:** [July 14, 2015, 5:25pm UTC](https://community.smartthings.com/t/garage-door-automation-while-waiting-for-v2/19161/2 "2015-07-14T17:25:04Z")
MyQ from Chamberlain is popular. It is an add on device that will work with most garage door controllers. It just adds the networked control capability. You can use it with its own app for now, then try the community-provided SmartThings integration later. > **[myQ Smart Home Accessories | Chamberlain](https://www.chamberlain.com/smart-home/c/myq-accessories)** > > The Chamberlain Group LLC manufactures and markets some of the world's most reliable, efficient and cost-effective Garage Door Opener products for do-it-yourself installation. The full product line includes residential garage door openers and related... And here is @copyninja 's topic which discusses integration with SmartThings: > [@\[WITHDRAWN\] MyQ LiftMaster/Chamberlain](https://community.smartthings.com/t/release-myq-liftmaster-chamberlain/8939): > ---
**Author:** ![chayes1126](https://avatars.discourse-cdn.com/v4/letter/c/ebca7d/32.png) [@chayes1126](https://community.smartthings.com/u/chayes1126)\ **Post date:** [July 14, 2015, 5:53pm UTC](https://community.smartthings.com/t/garage-door-automation-while-waiting-for-v2/19161/3 "2015-07-14T17:53:08Z")
Thats exactly what I was looking for. Thanks a lot! ---
**Author:** ![lprzybylski](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/lprzybylski/32/16715_2.png) [@lprzybylski](https://community.smartthings.com/u/lprzybylski)\ **Post date:** [July 14, 2015, 7:58pm UTC](https://community.smartthings.com/t/garage-door-automation-while-waiting-for-v2/19161/4 "2015-07-14T19:58:28Z")
Do it yourself through Smartthings natively. I had a MyQ door opener working with Smartthings but it was never officially supported and therefore was constantly needing maintenance from developers. They did good work, but just do it yourself and you’ll see better results. [https://support.smartthings.com/hc/en-us/articles/201023520-How-can-I-open-and-close-my-garage-door-with-SmartThings-](https://support.smartthings.com/hc/en-us/articles/201023520-How-can-I-open-and-close-my-garage-door-with-SmartThings-) ---
**Author:** ![gytrdun](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/gytrdun/32/15322_2.png) [@gytrdun](https://community.smartthings.com/u/gytrdun)\ **Post date:** [July 14, 2015, 8:38pm UTC](https://community.smartthings.com/t/garage-door-automation-while-waiting-for-v2/19161/5 "2015-07-14T20:38:42Z")
I have the Sears AssureLink system and it works well. You can integrate with the MyQ smart app as well. In all honesty, I just use the Sears app rather than the smartthings integration. Funny story… I bought smartthings to get away from individual apps from the different automation apps (Wemo, etc). Edit to add: The AssureLink ‘says’ it will only work on “Sears” branded doors. I have a Lift Master, and it works just fine 😄 ---
**Author:** ![rey\_rios](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/rey_rios/32/95075_2.png) [@rey\_rios](https://community.smartthings.com/u/rey_rios)\ **Post date:** [July 14, 2015, 8:59pm UTC](https://community.smartthings.com/t/garage-door-automation-while-waiting-for-v2/19161/6 "2015-07-14T20:59:35Z")
I guess the only problem of doing it yourself vs MyQ is that you will have to buy the LMF-20, then the tilt sensors. I n my case, I have two doors so that would be around $200+ MyQ is about the same or less. But I hear you, with no official support is hard to sell it. ---
**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\ **Post date:** [July 14, 2015, 9:24pm UTC](https://community.smartthings.com/t/garage-door-automation-while-waiting-for-v2/19161/7 "2015-07-14T21:24:28Z")
There’s also the fact that the LFM relay is only UL listed for light fixtures, not hotwiring a garage door control. The MyQ meets UL 325 safety standards for unattended operation of garage doors. Not everyone will care about that, but it is a legitimate distinction. > **[Beware: Potential Legal Liabilities for Integrating Garage Doors with Home...](https://www.cepro.com/article/potential_legal_liabilities_for_integrating_garage_doors_with_home_automati/K5)** > > UL 325-2010 requires garage door controllers provide audible and visual cues for unattended operation. CE Pro asked Ken Kirschenbaum, an attorney that specializes in alarm and low-voltage systems, to address the important safety issues and legal... ---
**Author:** ![lprzybylski](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/lprzybylski/32/16715_2.png) [@lprzybylski](https://community.smartthings.com/u/lprzybylski)\ **Post date:** [July 15, 2015, 2:00pm UTC](https://community.smartthings.com/t/garage-door-automation-while-waiting-for-v2/19161/8 "2015-07-15T14:00:01Z")
For the MyQ install you’ll need the $102 hub, which comes with one door control. Then you’ll need to spend 50 bucks on a second one. I just converted mine over a month ago using the link I shared and it cost me $149.I bought the following tilt sensors > **[Amazon.com: Ecolink Intelligent Technology TILT-ZWAVE2-ECO-2 Z-Wave Gold Plated Components for Reliability Garage Door Tilt Sensor, White: Camera & Photo](https://www.amazon.com/gp/product/B00OJMKO24?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00)** > > From the leaders in Zwave technology, the Ecolink Garage Door Tilt Sensor allows you to improve the safety and security of your home and family easily and effectively. Built with premium components, i ... and then two of the LMF-20 boxes > **[Evolve LFM-20, LFM-20, by Evolve Guest Controls, Z-Wave Certification: ZC08-14030007 - Directional Spotlight Ceiling Fixtures - Amazon.com](https://www.amazon.com/gp/product/B006U1O978?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00)** > > The Evolve LFM-20 Isolated Contact Fixture Module is a component of the Evolve lighting control system. Wire the Isolated Contact Fixture Module and program it from the Wireless Controller to operate ... Basically its a wash except the fact that its completely controlled through Smartthings or whatever other Z-wave hub you may want to use and your not having to rely on development to get it working. ---
**Author:** ![TheFuzz4](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/thefuzz4/32/94151_2.png) [@TheFuzz4](https://community.smartthings.com/u/TheFuzz4)\ **Post date:** [July 15, 2015, 9:36pm UTC](https://community.smartthings.com/t/garage-door-automation-while-waiting-for-v2/19161/9 "2015-07-15T21:36:56Z")
I just got mine hooked up on Friday. I just bought a ecolink door sensor [Here](http://amzn.com/B00HPIYJWU) Stuck it on the side of the door and it works great. Then I did the LFM and mounted it to my ceiling. I hit the button in the app and I can now finally open my door from the bottom of my street 😄 Thanks ST for that. I also get alerts if the door is open past 10pm or if it opens after 10pm.