# Fibaro smoke sensor not reporting temp **URL:** \ **Category:** Devices & Integrations\ **Tags:** hubv2\ **Created:** [March 6, 2016, 10:54am UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392 "2016-03-06T10:54:58Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![cscheiene](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@cscheiene](https://community.smartthings.com/u/cscheiene)\ **Post date:** [March 6, 2016, 10:54am UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/1 "2016-03-06T10:54:58Z")
I´ve got 3 Fibaro smoke sensors. I´ve set temperature reporting interval to 5 minutes and every 0.1 degrees on all of the smoke sensors for testing. One of the sensors is never reporting temp, even if I move it outside where there is a 20 deg C difference from inside, its not reporting the change. ---
**Author:** ![CSC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CSC](https://community.smartthings.com/u/CSC)\ **Post date:** [August 1, 2016, 1:09pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/2 "2016-08-01T13:09:44Z")
Hi, did you manage to get the issue fix, I faced similar issue as well ---
**Author:** ![cscheiene](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@cscheiene](https://community.smartthings.com/u/cscheiene)\ **Post date:** [August 1, 2016, 1:32pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/3 "2016-08-01T13:32:56Z")
Yes, the config within the app is not working. I had to go into the IDE and create a new device type to be able to use the simulator. There you can press the configuration button to force it to take the configuration. Press the config button and the button on the smokesensor three times right after to wake it up and it should update the config. ---
**Author:** ![CSC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CSC](https://community.smartthings.com/u/CSC)\ **Post date:** [August 1, 2016, 2:58pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/4 "2016-08-01T14:58:20Z")
Thanks for your reply, may I know which device type you are using? ---
**Author:** ![cscheiene](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@cscheiene](https://community.smartthings.com/u/cscheiene)\ **Post date:** [August 1, 2016, 3:16pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/5 "2016-08-01T15:16:07Z")
Just use the standard fibaro smoke sensor (from template) ---
**Author:** ![CSC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CSC](https://community.smartthings.com/u/CSC)\ **Post date:** [August 1, 2016, 3:16pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/6 "2016-08-01T15:16:57Z")
unfortunately, mine doesn’t work ☹ ---
**Author:** ![cscheiene](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@cscheiene](https://community.smartthings.com/u/cscheiene)\ **Post date:** [August 1, 2016, 3:23pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/7 "2016-08-01T15:23:32Z")
What exactly is not working for you? After creating new device type you must install the simulator to the unit you are trying to configure ---
**Author:** ![CSC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CSC](https://community.smartthings.com/u/CSC)\ **Post date:** [August 1, 2016, 3:25pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/8 "2016-08-01T15:25:28Z")
In the app, the smoke sensor show the word “CLEAR”, but “–” for both temperature and battery(?), it has been there for a day. How do you “creating new device type & install the simulator”? ---
**Author:** ![cscheiene](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@cscheiene](https://community.smartthings.com/u/cscheiene)\ **Post date:** [August 1, 2016, 3:47pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/9 "2016-08-01T15:47:17Z")
Have you tried tripple clicking the button on the sensor to wake it up? ---
**Author:** ![CSC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CSC](https://community.smartthings.com/u/CSC)\ **Post date:** [August 3, 2016, 12:30am UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/10 "2016-08-03T00:30:24Z")
Yes, I tried that. I also removed it from ST, reset and re-added into ST. May I know your version of the sensor? I suspect mine was on the latest firmware that need diff handler. ---
**Author:** ![cscheiene](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@cscheiene](https://community.smartthings.com/u/cscheiene)\ **Post date:** [August 3, 2016, 8:11am UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/11 "2016-08-03T08:11:09Z")
Go to IDE Click on My Device Handlers Click Create New Device Handler Click From Template Select Fibaro Smoke Sensor and create From the simulator on RH side, select your location and the device you want to configure Triple click the button on the smoke sensor and click the configure button on the simulator, if you also have a tab with live logging you will be able to see if the configuration is sendt and received ---
**Author:** ![CSC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CSC](https://community.smartthings.com/u/CSC)\ **Post date:** [August 4, 2016, 3:57pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/12 "2016-08-04T15:57:35Z")
I got this error, pairing problem? d8c03317-c0ae-4be5-9ee6-5352550f994a 11:56:40 PM: debug Fibaro smoke sensor not sending configure until secure d8c03317-c0ae-4be5-9ee6-5352550f994a 11:56:40 PM: debug configure() \>\> isSecured() : false d8c03317-c0ae-4be5-9ee6-5352550f994a 11:56:08 PM: debug Updated with settings: [smokeSensorSensitivity:High, zwaveNotificationStatus:all notifications, visualIndicatorNotificationStatus:all notifications, soundNotificationStatus:exceeding temperature threshold, temperatureReportInterval:30 minutes, excessTemperatureSignalingInterval:null, lackOfZwaveRangeIndicationInterval:null] ---
**Author:** ![CSC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CSC](https://community.smartthings.com/u/CSC)\ **Post date:** [August 5, 2016, 11:06am UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/13 "2016-08-05T11:06:36Z")
@Tyler need your advice here ---
**Author:** ![Tyler](https://avatars.discourse-cdn.com/v4/letter/t/35a633/32.png) [@Tyler](https://community.smartthings.com/u/Tyler)\ **Post date:** [August 5, 2016, 4:43pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/14 "2016-08-05T16:43:33Z")
Are you getting an error during pairing about Secure Inclusion not completing? ---
**Author:** ![CSC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CSC](https://community.smartthings.com/u/CSC)\ **Post date:** [August 5, 2016, 10:24pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/15 "2016-08-05T22:24:48Z")
Where can I see the pairing info? So far I tried to un-pair and re-pair the sensors for 3 times. I do noted when I add the smoke sensor, the add things process alway not showing the sensor found but after I cancel it, I can find the sensor added. I noted the z-wave finger print is different from the one in the handler, and that result in SmartThings already pair it as"z-wave sensor", and I’ve to manually change the device type in IDE. Separately, I duplicated the Fibaro smoke sensor handler and updated the finger print, then SmartThings able to use the correct handler during the pairing, but I still can’t see the device info in the app. ---
**Author:** ![Tyler](https://avatars.discourse-cdn.com/v4/letter/t/35a633/32.png) [@Tyler](https://community.smartthings.com/u/Tyler)\ **Post date:** [August 5, 2016, 10:42pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/16 "2016-08-05T22:42:41Z")
> [@CSC](#): > > I noted the z-wave finger print is different from the one in the handler, and that result in SmartThings already pair it as"z-wave sensor", and I’ve to manually change the device type in IDE. This was probably causing the Configuration issue. If the device doesn’t pair correctly we can’t configure it correctly. If you use the DTH with the updated fingerprint it should pair AND fingerprint correctly. In the events list for the device or the hub do you see Secure Inclusion failures around the time of the pairing? Either way, it might be helpful to try pairing within 5-10 feet of the hub. ---
**Author:** ![CSC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CSC](https://community.smartthings.com/u/CSC)\ **Post date:** [August 6, 2016, 2:15am UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/18 "2016-08-06T02:15:42Z")
I removed and added the smoke sensor again, placing the sensor next to the hub. From the log, seems like ok but I still see “–” in the app. I also went into the app config, set the settings, done, and press the B button right after. ![](https://global.discourse-cdn.com/smartthings/original/3X/5/8/586170d0e6c0ec45d169c01657d87a9163278c1a.png) ---
**Author:** ![Tyler](https://avatars.discourse-cdn.com/v4/letter/t/35a633/32.png) [@Tyler](https://community.smartthings.com/u/Tyler)\ **Post date:** [August 8, 2016, 4:03pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/19 "2016-08-08T16:03:52Z")
Can you click on that “zwjoin” event and share a screenshot of that event detail page? ---
**Author:** ![CSC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CSC](https://community.smartthings.com/u/CSC)\ **Post date:** [August 8, 2016, 4:24pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/20 "2016-08-08T16:24:30Z")
Thanks for following up. Here you go: ![](https://global.discourse-cdn.com/smartthings/original/3X/d/d/dd900db9fb5f92dda7952f6eba5e1830a1e1b6d1.png) ---
**Author:** ![Tyler](https://avatars.discourse-cdn.com/v4/letter/t/35a633/32.png) [@Tyler](https://community.smartthings.com/u/Tyler)\ **Post date:** [August 8, 2016, 5:00pm UTC](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392/21 "2016-08-08T17:00:26Z")
Can you confirm the exact model number? [Next page](https://community.smartthings.com/t/fibaro-smoke-sensor-not-reporting-temp/41392.md?page=2)