# Fibaro Smart Implant **URL:** \ **Category:** Devices & Integrations\ **Created:** [March 25, 2019, 6:59am UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744 "2019-03-25T06:59:59Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![M\_Johansson](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/m_johansson/32/95863_2.png) [@M\_Johansson](https://community.smartthings.com/u/M_Johansson)\ **Post date:** [March 25, 2019, 6:59am UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/1 "2019-03-25T06:59:59Z")
Is there anyone who have a DH for [Smart Implant](https://www.fibaro.com/se/products/smart-implant/)? ---
**Author:** ![sidjohn1](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/sidjohn1/32/16652_2.png) [@sidjohn1](https://community.smartthings.com/u/sidjohn1)\ **Post date:** [March 25, 2019, 11:35am UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/2 "2019-03-25T11:35:45Z")
The website says its not available yet… until it is available it’s basically vaporware. ---
**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\ **Post date:** [March 25, 2019, 1:58pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/3 "2019-03-25T13:58:25Z")
That’s the new generation of the Fibaro universal sensor (FGBS-001) . (although it says it will have an IFTTT connection, that is only if you are using the Fibaro home center hub instead of SmartThings). the physical specs look very similar to the previous generation, so I am guessing that the Wi-Fi component may depend on using it with the fIbaro home center rather than this device itself, but I can’t tell for sure until they release more information on it. I haven’t heard of anyone who has one yet. If you are in the beta program, you can take a look at what people are doing with the previous generation and see if that helps any. > [@\[RELEASE\] Fibaro FGBS-001 Universal Binary Sensor (UBS)](https://community.smartthings.com/t/release-fibaro-fgbs-001-universal-binary-sensor-ubs/107436): > > Hi all, Ive been working on the Fibaro Universal Binary Sensor for a while now and have finally got it to a point where it is responsive and meets all my requirements. Main improvements: It can create two child devices for the two contact sensors and automatically updates them without a smart app (and you dont need to install extra device handlers as I use the default SmartThings testing ones). If you change the device handler for the child contact sensors to a “Simulated Motion Sensor” then the child devices will work as motion sensors instead of contact sensors. It can cope with four temperature sensors and negative temperatures but might behave erratically with Fahrenheit. - Note that temperature sensors have to be connected at the point you pair/include the UBS into SmartThings, ot… ---
**Author:** ![M\_Johansson](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/m_johansson/32/95863_2.png) [@M\_Johansson](https://community.smartthings.com/u/M_Johansson)\ **Post date:** [March 25, 2019, 6:50pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/4 "2019-03-25T18:50:39Z")
They are avaiable, at least in Europe, [link](https://www.vesternet.com/z-wave-fibaro-smart-implant?gclid=CjwKCAjw-OHkBRBkEiwAoOZqlwNuUt089sIqDu5Z6ZI5xXBHWnH1qeU6w2T8te7F7RAGMLXVuN9g_hoCuN4QAvD_BwE#fo_c=521&fo_k=848be1e1725168c68751331eb2c4bb4b&fo_s=gplauk) I know it support Z-wave plus, that is what I want and the difference from previous modell. ---
**Author:** ![Gil\_Hoffman](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/gil_hoffman/32/100506_2.png) [@Gil\_Hoffman](https://community.smartthings.com/u/Gil_Hoffman)\ **Post date:** [July 14, 2019, 2:49pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/5 "2019-07-14T14:49:32Z")
Hi. I am looking at the same device - thinking to connect it in my home. Have you succeed working with it? or maybe you found some other device that works on low voltage as well. ---
**Author:** ![M\_Johansson](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/m_johansson/32/95863_2.png) [@M\_Johansson](https://community.smartthings.com/u/M_Johansson)\ **Post date:** [July 14, 2019, 7:59pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/6 "2019-07-14T19:59:30Z")
No success so far, actually I have not had the time. Maybe I take it up again during the winter. I am not programmer and even if I have written some smart apps for my own use, I haven’t been able to write a device handler yet. I have seen one other low voltage device on the net, but it is far more uncommon and much more expensive than the Fibaro device, so it is not a good option for me. ---
**Author:** ![Gil\_Hoffman](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/gil_hoffman/32/100506_2.png) [@Gil\_Hoffman](https://community.smartthings.com/u/Gil_Hoffman)\ **Post date:** [July 15, 2019, 1:35pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/7 "2019-07-15T13:35:16Z")
An answer from Fibaro tech support: Hello, the device may work with limited functionalities as for now. We will prepare a handler for the Smarthings Classic app soon. ---
**Author:** ![bmeller](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/bmeller/32/95563_2.png) [@bmeller](https://community.smartthings.com/u/bmeller)\ **Post date:** [July 25, 2019, 3:17am UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/8 "2019-07-25T03:17:06Z")
Hi Gil - did you hear anything back from Fibaro support? I just received a Smart Implant and would be happy to use a device handler from them instead of cobbling something together myself. Thanks! ---
**Author:** ![Gil\_Hoffman](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/gil_hoffman/32/100506_2.png) [@Gil\_Hoffman](https://community.smartthings.com/u/Gil_Hoffman)\ **Post date:** [July 25, 2019, 12:30pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/9 "2019-07-25T12:30:38Z")
Nothing new - Just the previous response. I have one too (somewhere in one of my drawers), Please inform if you succeeds getting notifications on input changes. ---
**Author:** ![Gil\_Hoffman](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/gil_hoffman/32/100506_2.png) [@Gil\_Hoffman](https://community.smartthings.com/u/Gil_Hoffman)\ **Post date:** [August 28, 2019, 1:30pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/10 "2019-08-28T13:30:34Z")
I’ve asked Fibaro if something new on this and the answer is: Hello, I do not have any information about it. The change may not happen till the end of this year as I was advised. I apologize for the inconvenience ---
**Author:** ![Gil\_Hoffman](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/gil_hoffman/32/100506_2.png) [@Gil\_Hoffman](https://community.smartthings.com/u/Gil_Hoffman)\ **Post date:** [August 30, 2019, 11:31am UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/11 "2019-08-30T11:31:26Z")
I think that I’ll write my own DH for this smart implant. Will anyone help? ---
**Author:** ![Tommy\_Olausson](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/tommy_olausson/32/93827_2.png) [@Tommy\_Olausson](https://community.smartthings.com/u/Tommy_Olausson)\ **Post date:** [September 3, 2019, 8:32pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/12 "2019-09-03T20:32:37Z")
I really want to help but i dont have the knowledge. Been trying with the dh for the old one whitout succsess… ---
**Author:** ![ovidiu.pruteanu](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ovidiu.pruteanu/32/101631_2.png) [@ovidiu.pruteanu](https://community.smartthings.com/u/ovidiu.pruteanu)\ **Post date:** [September 17, 2019, 3:00pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/13 "2019-09-17T15:00:05Z")
I just placed an order for a couple of implants. I can help write the DH. ---
**Author:** ![Tommy\_Olausson](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/tommy_olausson/32/93827_2.png) [@Tommy\_Olausson](https://community.smartthings.com/u/Tommy_Olausson)\ **Post date:** [September 17, 2019, 8:14pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/14 "2019-09-17T20:14:17Z")
Perfect! Keep us updated ---
**Author:** ![Tommy\_Olausson](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/tommy_olausson/32/93827_2.png) [@Tommy\_Olausson](https://community.smartthings.com/u/Tommy_Olausson)\ **Post date:** [September 27, 2019, 11:47am UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/15 "2019-09-27T11:47:11Z")
Any success yet? ---
**Author:** ![ovidiu.pruteanu](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ovidiu.pruteanu/32/101631_2.png) [@ovidiu.pruteanu](https://community.smartthings.com/u/ovidiu.pruteanu)\ **Post date:** [September 27, 2019, 5:53pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/16 "2019-09-27T17:53:20Z")
My order should have arrived a few days ago but hasn’t yet. I’ll keep this thread updated with any progress. ---
**Author:** ![Gil\_Hoffman](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/gil_hoffman/32/100506_2.png) [@Gil\_Hoffman](https://community.smartthings.com/u/Gil_Hoffman)\ **Post date:** [September 29, 2019, 10:48am UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/17 "2019-09-29T10:48:34Z")
Not yet. Didn’t received the order yet. ---
**Author:** ![Marco\_Raimondi](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/marco_raimondi/32/96832_2.png) [@Marco\_Raimondi](https://community.smartthings.com/u/Marco_Raimondi)\ **Post date:** [October 6, 2019, 9:31am UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/18 "2019-10-06T09:31:58Z")
Hey all, any news regarding smart implant device type? it’s two days i try but I never figure out how to read second input. Thanks ---
**Author:** ![zuperman4ever](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/zuperman4ever/32/16521_2.png) [@zuperman4ever](https://community.smartthings.com/u/zuperman4ever)\ **Post date:** [October 20, 2019, 10:39pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/19 "2019-10-20T22:39:58Z")
Any update to this DH? ---
**Author:** ![ovidiu.pruteanu](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ovidiu.pruteanu/32/101631_2.png) [@ovidiu.pruteanu](https://community.smartthings.com/u/ovidiu.pruteanu)\ **Post date:** [October 23, 2019, 10:30pm UTC](https://community.smartthings.com/t/fibaro-smart-implant/158744/20 "2019-10-23T22:30:22Z")
I started working on this DH today. If anyone has done some work on it already, or would like to help, please let me know. Thanks [Next page](https://community.smartthings.com/t/fibaro-smart-implant/158744.md?page=2)