FAQ: Full list of buttons and remotes confirmed to work with SmartThings [Not all devices listed work with the 2020 Platform]

[JDRoberts]

(US) Leviton VRCS4, mains-powered. Typically costs around $125.

This one is tricky to get set up, but appears to work well once it is. There are two different models. One does not control the current, so it acts only as a scene controller and will not work if the Internet is down. The other model has one of its buttons dedicated to controlling the line that it is wired into, but then that means one of the buttons is reserved for that purpose. So read the thread carefully so you know which one will fit your own needs.

[OBSOLETE] Leviton VRCS4

I’ve created a device type for the Leviton Vizia VRCS4 Scene Controller. Because of the way the scene commands work, I essentially turned it into a 4 button remote, 3 if there is a built in relay. Setting it up is a bit of work: Note: buttons are numbered 1-4 and dim, with dim at the bottom. To associate, press and hold buttons 1 and 3 on the VRCS4 for 5 seconds, the LEDs will start to flash amber. Hold the SmartThings Hub near to the device tell the SmartThings app to connect a new device. Note: you tell the device to connect before the hub. The hub should find a ZWave Remote. This will eventually be your scene controller. If you have a load connected to the VRCS4 (hardwired): Go back to the SmartThings app dashboard. Press and hold buttons 2 and 4 on the VRCS4 for 5 seconds. The le…