I’m brand new to SmartThings, and I’m trying to configure Smart Home Monitor to alert not just on door open/close sensors and motion sensors, but also on certain vibration sensors when it is in the Armed state. I can’t find a way to do that.
I can use Custom to make a vibration alert based on Away/Home/Night “modes”, but these appear to be totally separate from the Armed/Disarmed states. Am I missing something?
Nope, you got it. Modes are completely separate from SHM armed states. Some of the early documentation on SHM, which is still available on the support site, called the armed states “mode” even though there already existed a system feature called mode so that was just a mistake that has led to considerable confusion.
You can set both modes and SHM armed states in a routine, if that helps any.
Also, the following post is a good example of how one member uses both modes and SHM armed states. It might help clear up some of the confusion. He is using five routines throughout the day to change both the mode and the SHM armed state.
Those examples helped a lot. I think the piece I was missing was that I can have a Routine that ties both the SHM state and mode to a single event (for example, if everyone leaves, then we switch to Armed state and Away mode).
if you don’t have the ADT/SmartThings security panel, ignore the rest of this post, or you’re going to get completely confused.
for those who have the ADT/smartthings devices
SmartThings introduced a new device in the fall of 2017, the ADT/smartthings security panel.
Unfortunately, they chose to use the word “mode” for the armed states of the panel, even though the word mode is already used differently on the home automation side. So everything we just carefully explained in this thread to remove confusion doesn’t apply to the ADT system.
If you have the new ADT/SmartThings security panel, The arm/disarm concept for the ADT sensors works completely differently than smarthome monitor does with the original smartthings hub. So that can make things even more confusing.
Assuming you have signed up for the ADT monitoring service, then…
The ADT panel has three armed states:
Disarm ( no alerts will be sent to ADT)
Arm Away ( events recognized by any of the ADT motion sensors or ADT open/close sensors will be sent to ADT)
Arm Stay ( events recognized by the ADT motion sensors will be ignored, but events recognized by any of the ADT open/close sensors will be sent to ADT)
There is no custom notification option like there is with smart home monitor. And there are no zones.
Here’s the official support article, which is really hard to find. At present, if you just search for ADT you will get information about the hardware, but then you will get links to the SmartThings app which will give you information about smart home monitor instead of about the new ADT options. So I guess it just hasn’t been updated yet. But here’s the one and only page I saw which actually talks about the app for the ADT system.
You will not be able to change the armed states for the ADT system at the present time using a routine. So the “Mode” field that you will see in the routine set up or smart lighting set up only applies to the home automation modes. Not the ADT arm state modes.
Anyway, all of this is why it’s important for us to know which hub model you have and which sensors we are talking about in order to be able to help answer your questions.
March 2018 FAQ Update for new “SmartThings (Samsung Connect)” App
March 2018, Samsung renamed the original smartthings app to “smartthings classic” and released a new app, “smartthings (Samsung connect)."
If you are already using the classic app do not switch to the new app until you get an individual message from Samsung that your account has been migrated.
Eventually, however, everyone will end up using a new app. And the new app uses completely new terminology for modes and armed states.
In the new app, what used to be called “mode” is called “location.mode”.
What used to be called “SHM Armed State” is called “security.mode” in the new app.
These are still two separate variables controlling different aspects of your automations but with similar value names. So it’s likely there will still be some confusion. But it will be confusion about two new variable names each including the word “mode.”
Also note that in the new app, as of this writing, there is no longer any way to change the SHM security mode from an automation. You have to manually change it through the app. That’s been true now for a year through multiple app updates, so it doesn’t look like they’re going to change it anytime soon.
Thanks to @WB70 for posting this information in a different thread.